Commit 825a84d1 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by David S. Miller
Browse files

atlx: convert to net_device_ops 



Convert this driver to network device ops. Compile tested only.

Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1e058ab5

drivers/net/atlx/atl1.c

+16 −12
Original line number Diff line number Diff line
@@ -2880,6 +2880,21 @@ static void atl1_poll_controller(struct net_device *netdev) 
}

#endif



static const struct net_device_ops atl1_netdev_ops = {

	.ndo_open		= atl1_open,

	.ndo_stop		= atl1_close,

	.ndo_set_multicast_list	= atlx_set_multi,

	.ndo_validate_addr	= eth_validate_addr,

	.ndo_set_mac_address	= atl1_set_mac,

	.ndo_change_mtu		= atl1_change_mtu,

	.ndo_do_ioctl		= atlx_ioctl,

	.ndo_tx_timeout	= atlx_tx_timeout,

	.ndo_vlan_rx_register	= atlx_vlan_rx_register,

#ifdef CONFIG_NET_POLL_CONTROLLER

	.ndo_poll_controller	= atl1_poll_controller,

#endif

};



/*

 * atl1_probe - Device Initialization Routine

 * @pdev: PCI device information struct
@@ -2967,20 +2982,9 @@ static int __devinit atl1_probe(struct pci_dev *pdev, 
	adapter->mii.phy_id_mask = 0x1f;

	adapter->mii.reg_num_mask = 0x1f;



	netdev->open = &atl1_open;

	netdev->stop = &atl1_close;

	netdev->netdev_ops = &atl1_netdev_ops;

	netdev->hard_start_xmit = &atl1_xmit_frame;



	netdev->set_multicast_list = &atlx_set_multi;

	netdev->set_mac_address = &atl1_set_mac;

	netdev->change_mtu = &atl1_change_mtu;

	netdev->do_ioctl = &atlx_ioctl;

	netdev->tx_timeout = &atlx_tx_timeout;

	netdev->watchdog_timeo = 5 * HZ;

#ifdef CONFIG_NET_POLL_CONTROLLER

	netdev->poll_controller = atl1_poll_controller;

#endif

	netdev->vlan_rx_register = atlx_vlan_rx_register;



	netdev->ethtool_ops = &atl1_ethtool_ops;

	adapter->bd_number = cards_found;

drivers/net/atlx/atl2.c

+17 −16
Original line number Diff line number Diff line
@@ -1311,6 +1311,22 @@ static void atl2_poll_controller(struct net_device *netdev) 
}

#endif





static const struct net_device_ops atl2_netdev_ops = {

	.ndo_open		= atl2_open,

	.ndo_stop		= atl2_close,

	.ndo_set_multicast_list	= atl2_set_multi,

	.ndo_validate_addr	= eth_validate_addr,

	.ndo_set_mac_address	= atl2_set_mac,

	.ndo_change_mtu		= atl2_change_mtu,

	.ndo_do_ioctl		= atl2_ioctl,

	.ndo_tx_timeout		= atl2_tx_timeout,

	.ndo_vlan_rx_register	= atl2_vlan_rx_register,

#ifdef CONFIG_NET_POLL_CONTROLLER

	.ndo_poll_controller	= atl2_poll_controller,

#endif

};



/*

 * atl2_probe - Device Initialization Routine

 * @pdev: PCI device information struct
@@ -1384,25 +1400,10 @@ static int __devinit atl2_probe(struct pci_dev *pdev, 


	atl2_setup_pcicmd(pdev);



	netdev->open = &atl2_open;

	netdev->stop = &atl2_close;

	netdev->hard_start_xmit = &atl2_xmit_frame;

	netdev->set_multicast_list = &atl2_set_multi;

	netdev->set_mac_address = &atl2_set_mac;

	netdev->change_mtu = &atl2_change_mtu;

	netdev->do_ioctl = &atl2_ioctl;

	netdev->netdev_ops = &atl2_netdev_ops;

	atl2_set_ethtool_ops(netdev);



#ifdef CONFIG_NET_POLL_CONTROLLER

	netdev->poll_controller = atl2_poll_controller;

#endif

#ifdef HAVE_TX_TIMEOUT

	netdev->tx_timeout = &atl2_tx_timeout;

	netdev->watchdog_timeo = 5 * HZ;

#endif

#ifdef NETIF_F_HW_VLAN_TX

	netdev->vlan_rx_register = atl2_vlan_rx_register;

#endif

	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);



	netdev->mem_start = mmio_start;