Commit 7fccbd67 authored by Robert Marko's avatar Robert Marko Committed by Bjorn Andersson
Browse files

ARM: dts: qcom: add Alfa Network AP120C-AC 



ALFA Network AP120C-AC is a dual-band ceiling AP, based on Qualcomm
IPQ4018 + QCA8075 platform.

Specification:

- Qualcomm IPQ4018 (717 MHz)
- 256 MB of RAM (DDR3)
- 16 MB (SPI NOR) + 128 or 512 MB (SPI NAND) of flash
- 2x Gbps Ethernet, with 802.3af PoE support in one port
- 2T2R 2.4/5 GHz (IPQ4018), with ext. FEMs (QFE1952, QFE1922)
- 3x U.FL connectors
- 1x 1.8 dBi (Bluetooth) and 2x 3/5 dBi dual-band (Wi-Fi) antennas
- Atmel/Microchip AT97SC3205T TPM module (I2C bus)
- TI CC2540 Bluetooth LE module (USB 2.0 bus)
- 1x button (reset)
- 1x USB 2.0
- DC jack for main power input (12 V)
- UART header available on PCB (2.0 mm pitch)

This adds DTS for both the generic and custom Bit edition for Sartura.

Signed-off-by: default avatarRobert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Link: https://lore.kernel.org/r/20200909195640.3127341-4-robert.marko@sartura.hr


Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 308b2365

arch/arm/boot/dts/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -912,6 +912,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ 
	qcom-apq8074-dragonboard.dtb \

	qcom-apq8084-ifc6540.dtb \

	qcom-apq8084-mtp.dtb \

	qcom-ipq4018-ap120c-ac.dtb \

	qcom-ipq4018-ap120c-ac-bit.dtb \

	qcom-ipq4018-jalapeno.dtb \

	qcom-ipq4019-ap.dk01.1-c1.dtb \

	qcom-ipq4019-ap.dk04.1-c1.dtb \

arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts

0 → 100644
+28 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT



#include "qcom-ipq4018-ap120c-ac.dtsi"



/ {

	model = "ALFA Network AP120C-AC Bit";



	leds {

		compatible = "gpio-leds";



		power {

			label = "ap120c-ac:green:power";

			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;

			default-state = "on";

		};



		wlan {

			label = "ap120c-ac:green:wlan";

			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;

		};



		support {

			label = "ap120c-ac:green:support";

			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;

			panic-indicator;

		};

	};

};

arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts

0 → 100644
+27 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT



#include "qcom-ipq4018-ap120c-ac.dtsi"



/ {

	leds {

		compatible = "gpio-leds";



		status: status {

			label = "ap120c-ac:blue:status";

			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;

			default-state = "keep";

		};



		wlan2g {

			label = "ap120c-ac:green:wlan2g";

			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "phy0tpt";

		};



		wlan5g {

			label = "ap120c-ac:red:wlan5g";

			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "phy1tpt";

		};

	};

};

arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi

0 → 100644
+254 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT



#include "qcom-ipq4019.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>



/ {

	model = "ALFA Network AP120C-AC";

	compatible = "alfa-network,ap120c-ac";



	keys {

		compatible = "gpio-keys";



		reset {

			label = "reset";

			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_RESTART>;

		};

	};

};



&tlmm {

	i2c0_pins: i2c0_pinmux {

		mux_i2c {

			function = "blsp_i2c0";

			pins = "gpio58", "gpio59";

			drive-strength = <16>;

			bias-disable;

		};

	};



	mdio_pins: mdio_pinmux {

		mux_mdio {

			pins = "gpio53";

			function = "mdio";

			bias-pull-up;

		};



		mux_mdc {

			pins = "gpio52";

			function = "mdc";

			bias-pull-up;

		};

	};



	serial0_pins: serial0_pinmux {

		mux_uart {

			pins = "gpio60", "gpio61";

			function = "blsp_uart0";

			bias-disable;

		};

	};



	spi0_pins: spi0_pinmux {

		mux_spi {

			function = "blsp_spi0";

			pins = "gpio55", "gpio56", "gpio57";

			drive-strength = <12>;

			bias-disable;

		};



		mux_cs {

			function = "gpio";

			pins = "gpio54", "gpio4";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};



	usb-power {

		line-name = "USB-power";

		gpios = <1 GPIO_ACTIVE_HIGH>;

		gpio-hog;

		output-high;

	};

};



&watchdog {

	status = "okay";

};



&prng {

	status = "okay";

};



&blsp_dma {

	status = "okay";

};



&blsp1_i2c3 {

	status = "okay";



	pinctrl-0 = <&i2c0_pins>;

	pinctrl-names = "default";



	tpm@29 {

		compatible = "atmel,at97sc3204t";

		reg = <0x29>;

	};

};



&blsp1_spi1 {

	status = "okay";



	pinctrl-0 = <&spi0_pins>;

	pinctrl-names = "default";

	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>;



	flash@0 {

		compatible = "jedec,spi-nor";

		reg = <0>;

		spi-max-frequency = <24000000>;



		partitions {

			compatible = "fixed-partitions";

			#address-cells = <1>;

			#size-cells = <1>;



			partition@0 {

				label = "SBL1";

				reg = <0x00000000 0x00040000>;

				read-only;

			};



			partition@40000 {

				label = "MIBIB";

				reg = <0x00040000 0x00020000>;

				read-only;

			};



			partition@60000 {

				label = "QSEE";

				reg = <0x00060000 0x00060000>;

				read-only;

			};



			partition@c0000 {

				label = "CDT";

				reg = <0x000c0000 0x00010000>;

				read-only;

			};



			partition@d0000 {

				label = "DDRPARAMS";

				reg = <0x000d0000 0x00010000>;

				read-only;

			};



			partition@e0000 {

				label = "u-boot-env";

				reg = <0x000e0000 0x00010000>;

			};



			partition@f0000 {

				label = "u-boot";

				reg = <0x000f0000 0x00080000>;

				read-only;

			};



			partition@170000 {

				label = "ART";

				reg = <0x00170000 0x00010000>;

				read-only;

			};



			partition@180000 {

				label = "priv_data1";

				reg = <0x00180000 0x00010000>;

				read-only;

			};



			partition@190000 {

				label = "priv_data2";

				reg = <0x00190000 0x00010000>;

				read-only;

			};

		};

	};



	nand@1 {

		compatible = "spi-nand";

		reg = <1>;

		spi-max-frequency = <40000000>;



		partitions {

			compatible = "fixed-partitions";

			#address-cells = <1>;

			#size-cells = <1>;



			partition@0 {

				label = "ubi1";

				reg = <0x00000000 0x04000000>;

			};



			partition@4000000 {

				label = "ubi2";

				reg = <0x04000000 0x04000000>;

			};

		};

	};

};



&blsp1_uart1 {

	status = "okay";



	pinctrl-0 = <&serial0_pins>;

	pinctrl-names = "default";

};



&cryptobam {

	status = "okay";

};



&crypto {

	status = "okay";

};



&mdio {

	status = "okay";



	pinctrl-0 = <&mdio_pins>;

	pinctrl-names = "default";

};



&wifi0 {

	status = "okay";

};



&wifi1 {

	status = "okay";

	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";

};



&usb3_hs_phy {

	status = "okay";

};



&usb3 {

	status = "okay";



	dwc3@8a00000 {

		phys = <&usb3_hs_phy>;

		phy-names = "usb2-phy";

	};

};



&usb2_hs_phy {

	status = "okay";

};



&usb2 {

	status = "okay";

};