Commit 7eea1a23 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville
Browse files

bcma: cc: update defines 



Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 9ef9dbea

include/linux/bcma/bcma_driver_chipcommon.h

+50 −1
Original line number Diff line number Diff line
@@ -24,7 +24,7 @@ 
#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */

#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */

#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */

#define   BCMA_CC_FLASHT_NFLASH		0x00000200

#define   BCMA_CC_FLASHT_NFLASH		0x00000200	/* NAND flash */

#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */

#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */

#define   BCMA_PLLTYPE_NONE		0x00000000
@@ -45,6 +45,7 @@ 
#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */

#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */

#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */

#define  BCMA_CC_CAP_NFLASH		0x80000000	/* NAND flash present (rev >= 35 or BCM4706?) */

#define BCMA_CC_CORECTL			0x0008

#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */

#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
@@ -122,10 +123,58 @@ 
#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */

#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */

#define BCMA_CC_FLASHCTL		0x0040

/* Start/busy bit in flashcontrol */

#define  BCMA_CC_FLASHCTL_OPCODE	0x000000ff

#define  BCMA_CC_FLASHCTL_ACTION	0x00000700

#define  BCMA_CC_FLASHCTL_CS_ACTIVE	0x00001000	/* Chip Select Active, rev >= 20 */

#define  BCMA_CC_FLASHCTL_START		0x80000000

#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START

/* Flashcontrol action + opcodes for ST flashes */

#define  BCMA_CC_FLASHCTL_ST_WREN	0x0006		/* Write Enable */

#define  BCMA_CC_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */

#define  BCMA_CC_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */

#define  BCMA_CC_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */

#define  BCMA_CC_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */

#define  BCMA_CC_FLASHCTL_ST_PP		0x0302		/* Page Program */

#define  BCMA_CC_FLASHCTL_ST_SE		0x02d8		/* Sector Erase */

#define  BCMA_CC_FLASHCTL_ST_BE		0x00c7		/* Bulk Erase */

#define  BCMA_CC_FLASHCTL_ST_DP		0x00b9		/* Deep Power-down */

#define  BCMA_CC_FLASHCTL_ST_RES	0x03ab		/* Read Electronic Signature */

#define  BCMA_CC_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */

#define  BCMA_CC_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */

/* Flashcontrol action + opcodes for Atmel flashes */

#define  BCMA_CC_FLASHCTL_AT_READ			0x07e8

#define  BCMA_CC_FLASHCTL_AT_PAGE_READ			0x07d2

#define  BCMA_CC_FLASHCTL_AT_STATUS			0x01d7

#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE			0x0384

#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE			0x0387

#define  BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM		0x0283

#define  BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM		0x0286

#define  BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM		0x0288

#define  BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM		0x0289

#define  BCMA_CC_FLASHCTL_AT_PAGE_ERASE			0x0281

#define  BCMA_CC_FLASHCTL_AT_BLOCK_ERASE		0x0250

#define  BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382

#define  BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385

#define  BCMA_CC_FLASHCTL_AT_BUF1_LOAD			0x0253

#define  BCMA_CC_FLASHCTL_AT_BUF2_LOAD			0x0255

#define  BCMA_CC_FLASHCTL_AT_BUF1_COMPARE		0x0260

#define  BCMA_CC_FLASHCTL_AT_BUF2_COMPARE		0x0261

#define  BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM		0x0258

#define  BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM		0x0259

#define BCMA_CC_FLASHADDR		0x0044

#define BCMA_CC_FLASHDATA		0x0048

/* Status register bits for ST flashes */

#define  BCMA_CC_FLASHDATA_ST_WIP	0x01		/* Write In Progress */

#define  BCMA_CC_FLASHDATA_ST_WEL	0x02		/* Write Enable Latch */

#define  BCMA_CC_FLASHDATA_ST_BP_MASK	0x1c		/* Block Protect */

#define  BCMA_CC_FLASHDATA_ST_BP_SHIFT	2

#define  BCMA_CC_FLASHDATA_ST_SRWD	0x80		/* Status Register Write Disable */

/* Status register bits for Atmel flashes */

#define  BCMA_CC_FLASHDATA_AT_READY	0x80

#define  BCMA_CC_FLASHDATA_AT_MISMATCH	0x40

#define  BCMA_CC_FLASHDATA_AT_ID_MASK	0x38

#define  BCMA_CC_FLASHDATA_AT_ID_SHIFT	3

#define BCMA_CC_BCAST_ADDR		0x0050

#define BCMA_CC_BCAST_DATA		0x0054

#define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */