Commit 5080a08d authored Mar 21, 2014 by Ulf Hansson

mmc: mmci: Enforce max frequency configuration through DT



Remove the option to provide a maximum frequency as platform data,
enforce it through DT.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

parent 3faf80df

drivers/mmc/host/mmci.c

+1 −4

Original line number	Diff line number	Diff line
		@@ -1500,13 +1500,10 @@ static int mmci_probe(struct amba_device *dev,
		* If no maximum operating frequency is supplied, fall back to use
		* the module parameter, which has a (low) default value in case it
		* is not specified. Either value must not exceed the clock rate into
		* the block, of course. Also note that DT takes precedence over
		* platform data.
		* the block, of course.
		*/
		if (mmc->f_max)
		mmc->f_max = min(host->mclk, mmc->f_max);
		else if (plat->f_max)
		mmc->f_max = min(host->mclk, plat->f_max);
		else
		mmc->f_max = min(host->mclk, fmax);
		dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max);

include/linux/amba/mmci.h

+0 −4

Original line number	Diff line number	Diff line
		@@ -12,9 +12,6 @@ struct dma_chan;
		/**
		* struct mmci_platform_data - platform configuration for the MMCI
		* (also known as PL180) block.
		* @f_max: the maximum operational frequency for this host in this
		* platform configuration. When this is specified it takes precedence
		* over the module parameter for the same frequency.
		* @ocr_mask: available voltages on the 4 pins from the block, this
		* is ignored if a regulator is used, see the MMC_VDD_* masks in
		* mmc/host.h
		@@ -42,7 +39,6 @@ struct dma_chan;
		* bidirectional channel
		*/
		struct mmci_platform_data {
		unsigned int f_max;
		unsigned int ocr_mask;
		int (ios_handler)(struct device , struct mmc_ios *);
		unsigned int (status)(struct device );