Commit 4d9bae33 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Rob Herring
Browse files

dt-bindings: nfc: st,st21nfca: convert to dtschema 



Convert the ST ST21NFCA NFC controller to DT schema format.

Changes during bindings conversion:
1. Add a new required "interrupts" property, because it was missing in
   the old bindings by mistake.
2. Drop the "clock-frequency" property during conversion because it is a
   property of I2C bus controller, not I2C slave device.  It was also
   never used by the driver.

Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211011073934.34340-5-krzysztof.kozlowski@canonical.com


Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 4cc0246c

Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml

0 → 100644
+64 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause

%YAML 1.2

---

$id: http://devicetree.org/schemas/net/nfc/st,st21nfca.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#



title: STMicroelectronics SAS ST21NFCA NFC controller



maintainers:

  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>



properties:

  compatible:

    const: st,st21nfca-i2c



  enable-gpios:

    description: Output GPIO pin used for enabling/disabling the controller



  ese-present:

    type: boolean

    description: |

      Specifies that an ese is physically connected to the controller



  interrupts:

    maxItems: 1



  reg:

    maxItems: 1



  uicc-present:

    type: boolean

    description: |

      Specifies that the uicc swp signal can be physically connected to the

      controller



required:

  - compatible

  - enable-gpios

  - interrupts

  - reg



additionalProperties: false



examples:

  - |

    #include <dt-bindings/gpio/gpio.h>

    #include <dt-bindings/interrupt-controller/irq.h>



    i2c {

        #address-cells = <1>;

        #size-cells = <0>;



        nfc@1 {

            compatible = "st,st21nfca-i2c";

            reg = <0x1>;



            interrupt-parent = <&gpio5>;

            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;

            enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;



            ese-present;

            uicc-present;

        };

    };

Documentation/devicetree/bindings/net/nfc/st21nfca.txt

deleted100644 → 0
+0 −37
Original line number Diff line number Diff line 
* STMicroelectronics SAS. ST21NFCA NFC Controller



Required properties:

- compatible: Should be "st,st21nfca-i2c".

- clock-frequency: I²C work frequency.

- reg: address on the bus

- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA



Optional SoC Specific Properties:

- pinctrl-names: Contains only one value - "default".

- pintctrl-0: Specifies the pin control groups used for this controller.

- ese-present: Specifies that an ese is physically connected to the nfc

controller.

- uicc-present: Specifies that the uicc swp signal can be physically

connected to the nfc controller.



Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):



&i2c2 {





	st21nfca: st21nfca@1 {



		compatible = "st,st21nfca-i2c";



		reg = <0x01>;

		clock-frequency = <400000>;



		interrupt-parent = <&gpio5>;

		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;



		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;



		ese-present;

		uicc-present;

	};

};