Commit 3a62c2d2 authored by Chris Brandt's avatar Chris Brandt Committed by Simon Horman
Browse files

ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB 



Add support for Renesas RZ/A2M evaluation board.

Signed-off-by: default avatarChris Brandt <chris.brandt@renesas.com>
Reviewed-by: default avatarUlrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent bbbcd02b

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -843,6 +843,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ 
	r7s72100-genmai.dtb \

	r7s72100-gr-peach.dtb \

	r7s72100-rskrza1.dtb \

	r7s9210-rza2mevb.dtb \

	r8a73a4-ape6evm.dtb \

	r8a7740-armadillo800eva.dtb \

	r8a7743-iwg20d-q7.dtb \

arch/arm/boot/dts/r7s9210-rza2mevb.dts

0 → 100644
+82 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Device Tree Source for the RZA2MEVB board

 *

 * Copyright (C) 2018 Renesas Electronics

 *

 */



/dts-v1/;

#include "r7s9210.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/pinctrl/r7s9210-pinctrl.h>



/ {

	model = "RZA2MEVB";

	compatible = "renesas,rza2mevb", "renesas,r7s9210";



	aliases {

		serial0 = &scif4;

	};



	chosen {

		bootargs = "ignore_loglevel";

		stdout-path = "serial0:115200n8";

	};



	memory@40000000 {

		device_type = "memory";

		reg = <0x40000000 0x00800000>;	 /* HyperRAM */

	};



	lbsc {

		#address-cells = <1>;

		#size-cells = <1>;

	};



	leds {

		compatible = "gpio-leds";



		red {

			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;

		};

		green {

			gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;

		};

	};

};



/* EXTAL */

&extal_clk {

	clock-frequency = <24000000>;	/* 24MHz */

};



/* RTC_X1 */

&rtc_x1_clk {

	clock-frequency = <32768>;

};



&pinctrl {

	/* Serial Console */

	scif4_pins: serial4 {

		pinmux = <RZA2_PINMUX(PORT9, 0, 4)>,	/* TxD4 */

			 <RZA2_PINMUX(PORT9, 1, 4)>;	/* RxD4 */

	};

};



/* High resolution System tick timers */

&ostm0 {

	status = "okay";

};



&ostm1 {

	status = "okay";

};



/* Serial Console */

&scif4 {

	pinctrl-names = "default";

	pinctrl-0 = <&scif4_pins>;



	status = "okay";

};