Commit 25ffa0dd authored by Reto Schneider's avatar Reto Schneider Committed by Alexandre Belloni
Browse files

ARM: at91: Add GARDENA smart Gateway (Art. 19000) support 



This patch adds support for the GARDENA smart Gateway, which is based on
the Atmel AT91SAM9G25. It is equipped with 128 MiB of DDR2 RAM and
256 MiB NAND storage.

Please note that this gateway is not actually based on a AT91SAM9x5 EK
board, but is close enough to allow its DT to be used.

Co-developed-by: default avatarStefan Roese <sr@denx.de>
Co-developed-by: default avatarMichael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: default avatarStefan Roese <sr@denx.de>
Signed-off-by: default avatarMichael Zimmermann <michael.zimmermann@grandcentrix.net>
Signed-off-by: default avatarReto Schneider <reto.schneider@husqvarnagroup.com>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200822151023.31629-2-code@reto-schneider.ch
parent c05a4bff

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -43,6 +43,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ 
	at91-smartkiz.dtb \

	at91-wb45n.dtb \

	at91sam9g15ek.dtb \

	at91sam9g25-gardena-smart-gateway.dtb \

	at91sam9g25ek.dtb \

	at91sam9g35ek.dtb \

	at91sam9x25ek.dtb \

arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts

0 → 100644
+158 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0+

/*

 * Device Tree file for the GARDENA smart Gateway (Article No. 19000)

 *

 *  Copyright (C) 2020 GARDENA GmbH

 */



/dts-v1/;



#include "at91sam9g25.dtsi"

#include "at91sam9x5ek.dtsi"

#include <dt-bindings/input/input.h>



/ {

	model = "GARDENA smart Gateway (Article No. 19000)";

	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",

		"atmel,at91sam9";



	aliases {

		serial1 = &usart3;

	};



	gpio-keys {

		compatible = "gpio-keys";



		user_btn1 {

			label = "USER_BTN1";

			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_PROG1>;

		};

	};



	1wire_cm {

		status = "disabled";

	};



	leds {

		compatible = "gpio-leds";



		power_blue {

			label = "smartgw:power:blue";

			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		power_green {

			label = "smartgw:power:green";

			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;

			default-state = "on";

		};



		power_red {

			label = "smartgw:power:red";

			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		radio_blue {

			label = "smartgw:radio:blue";

			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		radio_green {

			label = "smartgw:radio:green";

			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		radio_red {

			label = "smartgw:radio:red";

			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		internet_blue {

			label = "smartgw:internet:blue";

			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		internet_green {

			label = "smartgw:internet:green";

			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		internet_red {

			label = "smartgw:internet:red";

			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;

			default-state = "off";

		};



		heartbeat {

			label = "smartgw:heartbeat";

			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};



		pb18 {

			status = "disabled";

		};



		pd21 {

			status = "disabled";

		};

	};

};



&macb0 {

	phy-mode = "rmii";

	status = "okay";

};



&usart0 {

	status = "disabled";

};



&usart2 {

	status = "disabled";

};



&usart3 {

	status = "okay";



	pinctrl-0 = <&pinctrl_usart3

		     &pinctrl_usart3_rts

		     &pinctrl_usart3_cts

		    >;

};



&watchdog {

	status = "okay";

};



&mmc0 {

	status = "disabled";

};



&mmc1 {

	status = "disabled";

};



&spi0 {

	status = "disabled";

};



&i2c0 {

	status = "disabled";

};



&adc0 {

	status = "disabled";

};



&ssc0 {

	status = "disabled";

};