Loading drivers/usb/serial/cypress_m8.h +16 −13 Original line number Diff line number Diff line Loading @@ -55,19 +55,22 @@ #define CT_GENERIC 0x0F /* End of chiptype definitions */ /* RS-232 serial data communication protocol definitions */ /* these are sent / read at byte 0 of the input/output hid reports */ /* You can find these values defined in the CY4601 USB to Serial design notes */ #define CONTROL_DTR 0x20 /* data terminal ready - flow control - host to device */ #define UART_DSR 0x20 /* data set ready - flow control - device to host */ #define CONTROL_RTS 0x10 /* request to send - flow control - host to device */ #define UART_CTS 0x10 /* clear to send - flow control - device to host */ #define UART_RI 0x80 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ /* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* * RS-232 serial data communication protocol definitions. * * These are sent / read at byte 0 of the input/output hid reports. * You can find these values defined in the CY4601 USB to Serial design notes. */ #define CONTROL_DTR 0x20 /* data terminal ready */ #define CONTROL_RTS 0x10 /* request to send */ #define CONTROL_RESET 0x08 /* sent with output report */ #define UART_RI 0x80 /* ring indicator */ #define UART_CD 0x40 /* carrier detect */ #define UART_DSR 0x20 /* data set ready */ #define UART_CTS 0x10 /* clear to send */ #define CYP_ERROR 0x08 /* received from input report */ /* End of RS-232 protocol definitions */ Loading Loading
drivers/usb/serial/cypress_m8.h +16 −13 Original line number Diff line number Diff line Loading @@ -55,19 +55,22 @@ #define CT_GENERIC 0x0F /* End of chiptype definitions */ /* RS-232 serial data communication protocol definitions */ /* these are sent / read at byte 0 of the input/output hid reports */ /* You can find these values defined in the CY4601 USB to Serial design notes */ #define CONTROL_DTR 0x20 /* data terminal ready - flow control - host to device */ #define UART_DSR 0x20 /* data set ready - flow control - device to host */ #define CONTROL_RTS 0x10 /* request to send - flow control - host to device */ #define UART_CTS 0x10 /* clear to send - flow control - device to host */ #define UART_RI 0x80 /* ring indicator - modem - device to host */ #define UART_CD 0x40 /* carrier detect - modem - device to host */ #define CYP_ERROR 0x08 /* received from input report - device to host */ /* Note - the below has nothing to do with the "feature report" reset */ #define CONTROL_RESET 0x08 /* sent with output report - host to device */ /* * RS-232 serial data communication protocol definitions. * * These are sent / read at byte 0 of the input/output hid reports. * You can find these values defined in the CY4601 USB to Serial design notes. */ #define CONTROL_DTR 0x20 /* data terminal ready */ #define CONTROL_RTS 0x10 /* request to send */ #define CONTROL_RESET 0x08 /* sent with output report */ #define UART_RI 0x80 /* ring indicator */ #define UART_CD 0x40 /* carrier detect */ #define UART_DSR 0x20 /* data set ready */ #define UART_CTS 0x10 /* clear to send */ #define CYP_ERROR 0x08 /* received from input report */ /* End of RS-232 protocol definitions */ Loading