Commit 217390ad authored by David Jander's avatar David Jander Committed by Shawn Guo
Browse files

ARM: dts: imx6qdl-vicut1.dtsi: Move some node out to DTS files 



This commit will finally make this file identical to imx6qdl-victgo.dtsi.
All nodes that are removed here are added as-is to the DTS files that
include this file.

Signed-off-by: default avatarDavid Jander <david@protonic.nl>
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent d3809847

arch/arm/boot/dts/imx6dl-vicut1.dts

+122 −0
Original line number Diff line number Diff line
@@ -10,4 +10,126 @@ 
/ {

	model = "Kverneland UT1 Board";

	compatible = "kvg,vicut1", "fsl,imx6dl";



	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpiokeys>;

		autorepeat;



		power {

			label = "Power Button";

			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_POWER>;

			wakeup-source;

		};

	};



	panel {

		compatible = "kyo,tcg121xglp";

		backlight = <&backlight_lcd>;

		power-supply = <&reg_3v3>;



		port {

			panel_in: endpoint {

				remote-endpoint = <&lvds0_out>;

			};

		};

	};

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii-id";

	phy-handle = <&rgmii_phy>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		/* Microchip KSZ9031RNX PHY */

		rgmii_phy: ethernet-phy@0 {

			reg = <0>;

			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;

			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;

			reset-assert-us = <10000>;

			reset-deassert-us = <300>;

		};

	};

};



&gpio1 {

	gpio-line-names =

		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",

			"CAM2_MIRROR", "", "", "SMBALERT",

		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",

		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",

			"SD1_DATA3", "ETH_MDIO", "",

		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";

};



&gpio4 {

	gpio-line-names =

		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",

		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",

			"CAN2_SR", "CAN2_TX", "CAN2_RX",

		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",

			"HITCH_IN_OUT",

		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",

			"ISB_LED";

};



&gpio5 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",

			"I2S_BITCLK", "I2S_DOUT",

		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",

			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";

};



&gpio6 {

	gpio-line-names =

		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",

			"ITU656_D6", "ITU656_D7", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",

			"RGMII_TD3",

		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",

			"RGMII_RD2", "RGMII_RD3", "", "";

};



&iomuxc {

	pinctrl_enet: enetgrp {

		fsl,pins = <

			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030

			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030

			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030

			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030

			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030

			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030

			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030

			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030

			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030

			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030

			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030

			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030

			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030

			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030

			/* Phy reset */

			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0

			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1

		>;

	};



	pinctrl_gpiokeys: gpiokeygrp {

		fsl,pins = <

			/* nON_SWITCH */

			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0

		>;

	};

};

arch/arm/boot/dts/imx6q-vicut1.dts

+122 −0
Original line number Diff line number Diff line
@@ -10,4 +10,126 @@ 
/ {

	model = "Kverneland UT1Q Board";

	compatible = "kvg,vicut1q", "fsl,imx6q";



	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpiokeys>;

		autorepeat;



		power {

			label = "Power Button";

			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_POWER>;

			wakeup-source;

		};

	};



	panel {

		compatible = "kyo,tcg121xglp";

		backlight = <&backlight_lcd>;

		power-supply = <&reg_3v3>;



		port {

			panel_in: endpoint {

				remote-endpoint = <&lvds0_out>;

			};

		};

	};

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii-id";

	phy-handle = <&rgmii_phy>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		/* Microchip KSZ9031RNX PHY */

		rgmii_phy: ethernet-phy@0 {

			reg = <0>;

			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;

			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;

			reset-assert-us = <10000>;

			reset-deassert-us = <300>;

		};

	};

};



&gpio1 {

	gpio-line-names =

		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",

			"CAM2_MIRROR", "", "", "SMBALERT",

		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",

		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",

			"SD1_DATA3", "ETH_MDIO", "",

		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";

};



&gpio4 {

	gpio-line-names =

		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",

		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",

			"CAN2_SR", "CAN2_TX", "CAN2_RX",

		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",

			"HITCH_IN_OUT",

		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",

			"ISB_LED";

};



&gpio5 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",

			"I2S_BITCLK", "I2S_DOUT",

		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",

			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";

};



&gpio6 {

	gpio-line-names =

		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",

			"ITU656_D6", "ITU656_D7", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",

			"RGMII_TD3",

		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",

			"RGMII_RD2", "RGMII_RD3", "", "";

};



&iomuxc {

	pinctrl_enet: enetgrp {

		fsl,pins = <

			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030

			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030

			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030

			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030

			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030

			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030

			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030

			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030

			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030

			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030

			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030

			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030

			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030

			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030

			/* Phy reset */

			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0

			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1

		>;

	};



	pinctrl_gpiokeys: gpiokeygrp {

		fsl,pins = <

			/* nON_SWITCH */

			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0

		>;

	};

};

arch/arm/boot/dts/imx6qdl-vicut1.dtsi

+0 −120
Original line number Diff line number Diff line
@@ -70,20 +70,6 @@ counter-2 { 
		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;

	};



	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpiokeys>;

		autorepeat;



		power {

			label = "Power Button";

			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_POWER>;

			wakeup-source;

		};

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";
@@ -111,18 +97,6 @@ led-2 { 
		};

	};



	panel {

		compatible = "kyo,tcg121xglp";

		backlight = <&backlight_lcd>;

		power-supply = <&reg_3v3>;



		port {

			panel_in: endpoint {

				remote-endpoint = <&lvds0_out>;

			};

		};

	};



	reg_1v8: regulator-1v8 {

		compatible = "regulator-fixed";

		regulator-name = "1v8";
@@ -231,38 +205,6 @@ flash@0 { 
	};

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii-id";

	phy-handle = <&rgmii_phy>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		/* Microchip KSZ9031RNX PHY */

		rgmii_phy: ethernet-phy@0 {

			reg = <0>;

			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;

			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;

			reset-assert-us = <10000>;

			reset-deassert-us = <300>;

		};

	};

};



&gpio1 {

	gpio-line-names =

		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",

			"CAM2_MIRROR", "", "", "SMBALERT",

		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",

		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",

			"SD1_DATA3", "ETH_MDIO", "",

		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";

};



&gpio2 {

	gpio-line-names =

		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
@@ -282,38 +224,6 @@ &gpio3 { 
			"YACO_RESET";

};



&gpio4 {

	gpio-line-names =

		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",

		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",

			"CAN2_SR", "CAN2_TX", "CAN2_RX",

		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",

			"HITCH_IN_OUT",

		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",

			"ISB_LED";

};



&gpio5 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",

			"I2S_BITCLK", "I2S_DOUT",

		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",

			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";

};



&gpio6 {

	gpio-line-names =

		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",

			"ITU656_D6", "ITU656_D7", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",

			"RGMII_TD3",

		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",

			"RGMII_RD2", "RGMII_RD3", "", "";

};



&gpio7 {

	gpio-line-names =

		"EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",
@@ -589,36 +499,6 @@ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 
		>;

	};



	pinctrl_enet: enetgrp {

		fsl,pins = <

			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030

			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030

			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030

			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030

			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030

			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030

			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030

			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030

			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030

			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030

			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030

			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030

			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030

			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030

			/* Phy reset */

			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0

			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1

		>;

	};



	pinctrl_gpiokeys: gpiokeygrp {

		fsl,pins = <

			/* nON_SWITCH */

			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0

		>;

	};



	pinctrl_hog: hoggrp {

		fsl,pins = <

			/* ITU656_nRESET */

arch/arm/boot/dts/imx6qp-vicutp.dts

+122 −0
Original line number Diff line number Diff line
@@ -10,4 +10,126 @@ 
/ {

	model = "Kverneland UT1P Board";

	compatible = "kvg,vicutp", "fsl,imx6qp";



	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpiokeys>;

		autorepeat;



		power {

			label = "Power Button";

			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_POWER>;

			wakeup-source;

		};

	};



	panel {

		compatible = "kyo,tcg121xglp";

		backlight = <&backlight_lcd>;

		power-supply = <&reg_3v3>;



		port {

			panel_in: endpoint {

				remote-endpoint = <&lvds0_out>;

			};

		};

	};

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii-id";

	phy-handle = <&rgmii_phy>;

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		/* Microchip KSZ9031RNX PHY */

		rgmii_phy: ethernet-phy@0 {

			reg = <0>;

			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;

			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;

			reset-assert-us = <10000>;

			reset-deassert-us = <300>;

		};

	};

};



&gpio1 {

	gpio-line-names =

		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",

			"CAM2_MIRROR", "", "", "SMBALERT",

		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",

		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",

			"SD1_DATA3", "ETH_MDIO", "",

		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";

};



&gpio4 {

	gpio-line-names =

		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",

		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",

			"CAN2_SR", "CAN2_TX", "CAN2_RX",

		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",

			"HITCH_IN_OUT",

		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",

			"ISB_LED";

};



&gpio5 {

	gpio-line-names =

		"", "", "", "", "", "", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",

			"I2S_BITCLK", "I2S_DOUT",

		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",

			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";

};



&gpio6 {

	gpio-line-names =

		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",

			"ITU656_D6", "ITU656_D7", "", "",

		"", "", "", "", "", "", "", "",

		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",

			"RGMII_TD3",

		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",

			"RGMII_RD2", "RGMII_RD3", "", "";

};



&iomuxc {

	pinctrl_enet: enetgrp {

		fsl,pins = <

			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030

			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030

			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030

			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030

			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030

			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030

			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030

			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030

			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030

			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030

			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030

			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030

			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030

			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030

			/* Phy reset */

			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0

			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1

		>;

	};



	pinctrl_gpiokeys: gpiokeygrp {

		fsl,pins = <

			/* nON_SWITCH */

			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0

		>;

	};

};