Commit 122d2c5f authored by AngeloGioacchino Del Regno's avatar AngeloGioacchino Del Regno Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000 



Add device tree support for the F(x)tec Pro 1 (QX1000) smartphone;
this is a minimal configuration to boot to serial console.

Signed-off-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reported-by: default avatarkernel test robot <lkp@intel.com>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909123823.368199-1-angelogioacchino.delregno@somainline.org
parent 8199a0b3

arch/arm64/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb 
dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-xiaomi-gemini.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-xiaomi-scorpio.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-fxtec-pro1.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb

dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb

arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts

0 → 100644
+185 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: BSD-3-Clause

/*

 * Copyright (c) 2021, AngeloGioacchino Del Regno

 *                     <angelogioacchino.delregno@somainline.org>

 */



/dts-v1/;



#include "msm8998-mtp.dtsi"



#include <dt-bindings/input/input.h>

#include <dt-bindings/leds/common.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>



/ {

	model = "F(x)tec Pro1 (QX1000)";

	compatible = "fxtec,pro1", "qcom,msm8998";

	qcom,board-id = <0x02000b 0x10>;



	/*

	 * Until we hook up type-c detection, we

	 * have to stick with this. But it works.

	 */

	extcon_usb: extcon-usb {

		compatible = "linux,extcon-usb-gpio";

		id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;

	};



	gpio-hall-sensors {

		compatible = "gpio-keys";

		input-name = "hall-sensors";

		label = "Hall sensors";

		pinctrl-names = "default";

		pinctrl-0 = <&hall_sensor1_default>;



		hall-sensor1 {

			label = "Keyboard Hall Sensor";

			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;

			debounce-interval = <15>;

			gpio-key,wakeup;

			linux,input-type = <EV_SW>;

			linux,code = <SW_KEYPAD_SLIDE>;

		};

	};



	gpio-keys {

		compatible = "gpio-keys";

		input-name = "side-buttons";

		label = "Side buttons";

		#address-cells = <1>;

		#size-cells = <0>;

		pinctrl-names = "default";

		pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,

			    <&cam_snapshot_pin_a>;

		vol-up {

			label = "Volume Up";

			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;

			linux,input-type = <EV_KEY>;

			linux,code = <KEY_VOLUMEUP>;

			gpio-key,wakeup;

			debounce-interval = <15>;

		};



		camera-snapshot {

			label = "Camera Snapshot";

			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;

			linux,input-type = <EV_KEY>;

			linux,code = <KEY_CAMERA>;

			debounce-interval = <15>;

		};



		camera-focus {

			label = "Camera Focus";

			gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;

			linux,input-type = <EV_KEY>;

			linux,code = <KEY_CAMERA_FOCUS>;

			debounce-interval = <15>;

		};

	};



	reserved-memory {

		cont_splash_mem: memory@9d400000 {

			reg = <0x0 0x9d400000 0x0 0x2000000>;

			no-map;

		};



		zap_shader_region: memory@f6400000 {

			compatible = "shared-dma-pool";

			reg = <0x0 0xf6400000 0x0 0x2000>;

			no-map;

		};



		ramoops@ffc00000 {

			compatible = "ramoops";

			reg = <0x0 0xffc00000 0x0 0x100000>;

			console-size = <0x60000>;

			ecc-size = <16>;

			ftrace-size = <0x10000>;

			pmsg-size = <0x20000>;

			record-size = <0x10000>;

		};

	};

};



&mmcc {

	status = "ok";

};



&mmss_smmu {

	status = "ok";

};



&pm8998_gpio {

	vol_up_pin_a: vol-up-active {

		pins = "gpio6";

		function = "normal";

		bias-pull-up;

		input-enable;

		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;

	};



	cam_focus_pin_a: cam-focus-btn-active {

		pins = "gpio7";

		function = "normal";

		bias-pull-up;

		input-enable;

		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;

	};



	cam_snapshot_pin_a: cam-snapshot-btn-active {

		pins = "gpio8";

		function = "normal";

		bias-pull-up;

		input-enable;

		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;

	};

};



&pm8998_pon {

	resin {

		compatible = "qcom,pm8941-resin";

		interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;

		bias-pull-up;

		debounce = <15625>;

		linux,code = <KEY_VOLUMEDOWN>;

	};

};



&tlmm {

	gpio-reserved-ranges = <0 4>;



	mdp_vsync_n: mdp-vsync-n {

		pins = "gpio10";

		function = "mdp_vsync_a";

		bias-pull-down;

		drive-strength = <2>;

	};



	hall_sensor1_default: hall-sensor1-def {

		pins = "gpio124";

		function = "gpio";

		bias-disable;

		drive-strength = <2>;

		input-enable;

	};

};



&ufshc {

	status = "ok";

};



&ufsphy {

	status = "ok";

};



&usb3_dwc3 {

	dr_mode = "peripheral";

	extcon = <&extcon_usb>;

};



/* GT9286 analog supply */

&vreg_l28_3p0 {

	regulator-min-microvolt = <2800000>;

	regulator-max-microvolt = <2800000>;

};