Commit 117ccd55 authored by Shawn Guo's avatar Shawn Guo
Browse files

ARM: dts: imx6sl: add initial imx6sl-evk support 



Add initial imx6sl-evk board support with uart, usdhc and fec enabled.

Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent e29fe21c

arch/arm/boot/dts/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -121,7 +121,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ 
	imx6q-sabreauto.dtb \

	imx6q-sabrelite.dtb \

	imx6q-sabresd.dtb \

	imx6q-sbc6x.dtb

	imx6q-sbc6x.dtb \

	imx6sl-evk.dtb

dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \

	imx23-olinuxino.dtb \

	imx23-stmp378x_devb.dtb \

arch/arm/boot/dts/imx6sl-evk.dts

0 → 100644
+74 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2013 Freescale Semiconductor, Inc.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



/dts-v1/;



#include "imx6sl.dtsi"



/ {

	model = "Freescale i.MX6 SoloLite EVK Board";

	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";



	memory {

		reg = <0x80000000 0x40000000>;

	};

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_fec_1>;

	phy-mode = "rmii";

	status = "okay";

};



&iomuxc {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_hog>;



	hog {

		pinctrl_hog: hoggrp {

			fsl,pins = <

				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059

				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059

				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059

				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059

				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059

			>;

		};

	};

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1_1>;

	status = "okay";

};



&usdhc1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc1_1>;

	bus-width = <8>;

	cd-gpios = <&gpio4 7 0>;

	wp-gpios = <&gpio4 6 0>;

	status = "okay";

};



&usdhc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc2_1>;

	cd-gpios = <&gpio5 0 0>;

	wp-gpios = <&gpio4 29 0>;

	status = "okay";

};



&usdhc3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc3_1>;

	cd-gpios = <&gpio3 22 0>;

	status = "okay";

};