Commit 0edc3527 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by David S. Miller
Browse files

ixgb: convert to net_device_ops 



Convert this driver to network device ops. Compile tested only.

Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent afe29f7a

drivers/net/ixgb/ixgb_main.c

+18 −13
Original line number Diff line number Diff line
@@ -321,6 +321,23 @@ ixgb_reset(struct ixgb_adapter *adapter) 
	}

}



static const struct net_device_ops ixgb_netdev_ops = {

	.ndo_open 		= ixgb_open,

	.ndo_stop		= ixgb_close,

	.ndo_get_stats		= ixgb_get_stats,

	.ndo_set_multicast_list	= ixgb_set_multi,

	.ndo_validate_addr	= eth_validate_addr,

	.ndo_set_mac_address	= ixgb_set_mac,

	.ndo_change_mtu		= ixgb_change_mtu,

	.ndo_tx_timeout		= ixgb_tx_timeout,

	.ndo_vlan_rx_register	= ixgb_vlan_rx_register,

	.ndo_vlan_rx_add_vid	= ixgb_vlan_rx_add_vid,

	.ndo_vlan_rx_kill_vid	= ixgb_vlan_rx_kill_vid,

#ifdef CONFIG_NET_POLL_CONTROLLER

	.ndo_poll_controller	= ixgb_netpoll,

#endif

};



/**

 * ixgb_probe - Device Initialization Routine

 * @pdev: PCI device information struct
@@ -396,23 +413,11 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 
		}

	}



	netdev->open = &ixgb_open;

	netdev->stop = &ixgb_close;

	netdev->netdev_ops = &ixgb_netdev_ops;

	netdev->hard_start_xmit = &ixgb_xmit_frame;

	netdev->get_stats = &ixgb_get_stats;

	netdev->set_multicast_list = &ixgb_set_multi;

	netdev->set_mac_address = &ixgb_set_mac;

	netdev->change_mtu = &ixgb_change_mtu;

	ixgb_set_ethtool_ops(netdev);

	netdev->tx_timeout = &ixgb_tx_timeout;

	netdev->watchdog_timeo = 5 * HZ;

	netif_napi_add(netdev, &adapter->napi, ixgb_clean, 64);

	netdev->vlan_rx_register = ixgb_vlan_rx_register;

	netdev->vlan_rx_add_vid = ixgb_vlan_rx_add_vid;

	netdev->vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid;

#ifdef CONFIG_NET_POLL_CONTROLLER

	netdev->poll_controller = ixgb_netpoll;

#endif



	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);

drivers/net/ixgbe/ixgbe_main.c

+18 −14
Original line number Diff line number Diff line
@@ -3727,6 +3727,23 @@ static int ixgbe_link_config(struct ixgbe_hw *hw) 
	return hw->mac.ops.setup_link_speed(hw, autoneg, true, true);

}



static const struct net_device_ops ixgbe_netdev_ops = {

	.ndo_open 		= ixgbe_open,

	.ndo_stop		= ixgbe_close,

	.ndo_get_stats		= ixgbe_get_stats,

	.ndo_set_multicast_list	= ixgbe_set_rx_mode,

	.ndo_validate_addr	= eth_validate_addr,

	.ndo_set_mac_address	= ixgbe_set_mac,

	.ndo_change_mtu		= ixgbe_change_mtu,

	.ndo_tx_timeout		= ixgbe_tx_timeout,

	.ndo_vlan_rx_register	= ixgbe_vlan_rx_register,

	.ndo_vlan_rx_add_vid	= ixgbe_vlan_rx_add_vid,

	.ndo_vlan_rx_kill_vid	= ixgbe_vlan_rx_kill_vid,

#ifdef CONFIG_NET_POLL_CONTROLLER

	.ndo_poll_controller	= ixgbe_netpoll,

#endif

};



/**

 * ixgbe_probe - Device Initialization Routine

 * @pdev: PCI device information struct
@@ -3808,23 +3825,10 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, 
			continue;

	}



	netdev->open = &ixgbe_open;

	netdev->stop = &ixgbe_close;

	netdev->netdev_ops = &ixgbe_netdev_ops;

	netdev->hard_start_xmit = &ixgbe_xmit_frame;

	netdev->get_stats = &ixgbe_get_stats;

	netdev->set_rx_mode = &ixgbe_set_rx_mode;

	netdev->set_multicast_list = &ixgbe_set_rx_mode;

	netdev->set_mac_address = &ixgbe_set_mac;

	netdev->change_mtu = &ixgbe_change_mtu;

	ixgbe_set_ethtool_ops(netdev);

	netdev->tx_timeout = &ixgbe_tx_timeout;

	netdev->watchdog_timeo = 5 * HZ;

	netdev->vlan_rx_register = ixgbe_vlan_rx_register;

	netdev->vlan_rx_add_vid = ixgbe_vlan_rx_add_vid;

	netdev->vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid;

#ifdef CONFIG_NET_POLL_CONTROLLER

	netdev->poll_controller = ixgbe_netpoll;

#endif

	strcpy(netdev->name, pci_name(pdev));



	adapter->bd_number = cards_found;