Loading Documentation/hwmon/tmp421 +15 −7 Original line number Diff line number Diff line Loading @@ -14,6 +14,14 @@ Supported chips: Prefix: 'tmp423' Addresses scanned: I2C 0x4c and 0x4d Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html * Texas Instruments TMP441 Prefix: 'tmp441' Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f Datasheet: http://www.ti.com/product/tmp441 * Texas Instruments TMP442 Prefix: 'tmp442' Addresses scanned: I2C 0x4c and 0x4d Datasheet: http://www.ti.com/product/tmp442 Authors: Andre Prendel <andre.prendel@gmx.de> Loading @@ -21,13 +29,13 @@ Authors: Description ----------- This driver implements support for Texas Instruments TMP421, TMP422 and TMP423 temperature sensor chips. These chips implement one local and up to one (TMP421), up to two (TMP422) or up to three (TMP423) remote sensors. Temperature is measured in degrees Celsius. The chips are wired over I2C/SMBus and specified over a temperature range of -40 to +125 degrees Celsius. Resolution for both the local and remote channels is 0.0625 degree C. This driver implements support for Texas Instruments TMP421, TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. These chips implement one local and up to one (TMP421, TMP441), up to two (TMP422, TMP442) or up to three (TMP423) remote sensors. Temperature is measured in degrees Celsius. The chips are wired over I2C/SMBus and specified over a temperature range of -40 to +125 degrees Celsius. Resolution for both the local and remote channels is 0.0625 degree C. The chips support only temperature measurement. The driver exports the temperature values via the following sysfs files: Loading drivers/hwmon/Kconfig +1 −1 Original line number Diff line number Diff line Loading @@ -1431,7 +1431,7 @@ config SENSORS_TMP421 depends on I2C help If you say yes here you get support for Texas Instruments TMP421, TMP422 and TMP423 temperature sensor chips. TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp421. Loading drivers/hwmon/tmp421.c +17 −4 Original line number Diff line number Diff line Loading @@ -21,7 +21,7 @@ /* * Driver for the Texas Instruments TMP421 SMBus temperature sensor IC. * Supported models: TMP421, TMP422, TMP423 * Supported models: TMP421, TMP422, TMP423, TMP441, TMP442 */ #include <linux/module.h> Loading @@ -39,7 +39,7 @@ static const unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; enum chips { tmp421, tmp422, tmp423 }; enum chips { tmp421, tmp422, tmp423, tmp441, tmp442 }; /* The TMP421 registers */ #define TMP421_STATUS_REG 0x08 Loading @@ -60,11 +60,15 @@ static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 }; #define TMP421_DEVICE_ID 0x21 #define TMP422_DEVICE_ID 0x22 #define TMP423_DEVICE_ID 0x23 #define TMP441_DEVICE_ID 0x41 #define TMP442_DEVICE_ID 0x42 static const struct i2c_device_id tmp421_id[] = { { "tmp421", 2 }, { "tmp422", 3 }, { "tmp423", 4 }, { "tmp441", 2 }, { "tmp442", 3 }, { } }; MODULE_DEVICE_TABLE(i2c, tmp421_id); Loading Loading @@ -235,7 +239,8 @@ static int tmp421_detect(struct i2c_client *client, { enum chips kind; struct i2c_adapter *adapter = client->adapter; const char *names[] = { "TMP421", "TMP422", "TMP423" }; const char * const names[] = { "TMP421", "TMP422", "TMP423", "TMP441", "TMP442" }; int addr = client->addr; u8 reg; Loading Loading @@ -269,6 +274,14 @@ static int tmp421_detect(struct i2c_client *client, return -ENODEV; kind = tmp423; break; case TMP441_DEVICE_ID: kind = tmp441; break; case TMP442_DEVICE_ID: if (addr != 0x4c && addr != 0x4d) return -ENODEV; kind = tmp442; break; default: return -ENODEV; } Loading Loading @@ -319,5 +332,5 @@ static struct i2c_driver tmp421_driver = { module_i2c_driver(tmp421_driver); MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>"); MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor driver"); MODULE_DESCRIPTION("Texas Instruments TMP421/422/423/441/442 temperature sensor driver"); MODULE_LICENSE("GPL"); Loading
Documentation/hwmon/tmp421 +15 −7 Original line number Diff line number Diff line Loading @@ -14,6 +14,14 @@ Supported chips: Prefix: 'tmp423' Addresses scanned: I2C 0x4c and 0x4d Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html * Texas Instruments TMP441 Prefix: 'tmp441' Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f Datasheet: http://www.ti.com/product/tmp441 * Texas Instruments TMP442 Prefix: 'tmp442' Addresses scanned: I2C 0x4c and 0x4d Datasheet: http://www.ti.com/product/tmp442 Authors: Andre Prendel <andre.prendel@gmx.de> Loading @@ -21,13 +29,13 @@ Authors: Description ----------- This driver implements support for Texas Instruments TMP421, TMP422 and TMP423 temperature sensor chips. These chips implement one local and up to one (TMP421), up to two (TMP422) or up to three (TMP423) remote sensors. Temperature is measured in degrees Celsius. The chips are wired over I2C/SMBus and specified over a temperature range of -40 to +125 degrees Celsius. Resolution for both the local and remote channels is 0.0625 degree C. This driver implements support for Texas Instruments TMP421, TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. These chips implement one local and up to one (TMP421, TMP441), up to two (TMP422, TMP442) or up to three (TMP423) remote sensors. Temperature is measured in degrees Celsius. The chips are wired over I2C/SMBus and specified over a temperature range of -40 to +125 degrees Celsius. Resolution for both the local and remote channels is 0.0625 degree C. The chips support only temperature measurement. The driver exports the temperature values via the following sysfs files: Loading
drivers/hwmon/Kconfig +1 −1 Original line number Diff line number Diff line Loading @@ -1431,7 +1431,7 @@ config SENSORS_TMP421 depends on I2C help If you say yes here you get support for Texas Instruments TMP421, TMP422 and TMP423 temperature sensor chips. TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp421. Loading
drivers/hwmon/tmp421.c +17 −4 Original line number Diff line number Diff line Loading @@ -21,7 +21,7 @@ /* * Driver for the Texas Instruments TMP421 SMBus temperature sensor IC. * Supported models: TMP421, TMP422, TMP423 * Supported models: TMP421, TMP422, TMP423, TMP441, TMP442 */ #include <linux/module.h> Loading @@ -39,7 +39,7 @@ static const unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; enum chips { tmp421, tmp422, tmp423 }; enum chips { tmp421, tmp422, tmp423, tmp441, tmp442 }; /* The TMP421 registers */ #define TMP421_STATUS_REG 0x08 Loading @@ -60,11 +60,15 @@ static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 }; #define TMP421_DEVICE_ID 0x21 #define TMP422_DEVICE_ID 0x22 #define TMP423_DEVICE_ID 0x23 #define TMP441_DEVICE_ID 0x41 #define TMP442_DEVICE_ID 0x42 static const struct i2c_device_id tmp421_id[] = { { "tmp421", 2 }, { "tmp422", 3 }, { "tmp423", 4 }, { "tmp441", 2 }, { "tmp442", 3 }, { } }; MODULE_DEVICE_TABLE(i2c, tmp421_id); Loading Loading @@ -235,7 +239,8 @@ static int tmp421_detect(struct i2c_client *client, { enum chips kind; struct i2c_adapter *adapter = client->adapter; const char *names[] = { "TMP421", "TMP422", "TMP423" }; const char * const names[] = { "TMP421", "TMP422", "TMP423", "TMP441", "TMP442" }; int addr = client->addr; u8 reg; Loading Loading @@ -269,6 +274,14 @@ static int tmp421_detect(struct i2c_client *client, return -ENODEV; kind = tmp423; break; case TMP441_DEVICE_ID: kind = tmp441; break; case TMP442_DEVICE_ID: if (addr != 0x4c && addr != 0x4d) return -ENODEV; kind = tmp442; break; default: return -ENODEV; } Loading Loading @@ -319,5 +332,5 @@ static struct i2c_driver tmp421_driver = { module_i2c_driver(tmp421_driver); MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>"); MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor driver"); MODULE_DESCRIPTION("Texas Instruments TMP421/422/423/441/442 temperature sensor driver"); MODULE_LICENSE("GPL");