Commits · 77e5daee8a0089999de394be98d28a799a0ebe6a · github.com / LinuxCNC / mesaflash

Sep 14, 2014

serial: support flash write and verify. Also increase timeouts on write and... · 77e5daee

Michael Geszkiewicz authored Sep 14, 2014


serial: support flash write and verify. Also increase timeouts on write and read to support waiting for long flash operations like erase and write_page

Signed-off-by: Michael Geszkiewicz <micges@wp.pl>

77e5daee

serial: read and write uses ppoll for waiting for writing or data. · 4a551240

Michael Geszkiewicz authored Sep 14, 2014



This resolve problems with lost bytes during flash id read or flash verification.

Signed-off-by: Michael Geszkiewicz <micges@wp.pl>

4a551240

lbp16: move FPGA reset and reload to common place as now both ethernet and... · 9a208d9c

Michael Geszkiewicz authored Sep 14, 2014


lbp16: move FPGA reset and reload to common place as now both ethernet and serial hm2 boards use them

Signed-off-by: Michael Geszkiewicz <micges@wp.pl>

9a208d9c

serial: finally working communcation at 115200 · a7e29560
Michael Geszkiewicz authored Sep 14, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
a7e29560

Sep 13, 2014
- libanyio: remove spilbp as only spi_boards use it and it's too simple to be standalone · f0018a4d
  Michael Geszkiewicz authored Sep 13, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  f0018a4d
- libanyio: factor out ethernet and serial transport level details from lbp16 · c044b78d
  Michael Geszkiewicz authored Sep 12, 2014
```
you must use lbp16_init with proper board type to setup SEND and RECV function pointers in lbp16.c
then you must call lbp16_send_packet and lbp16_recv_packet which will point to current transport layer functions

Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  c044b78d
- epp: remove unused function · 3b1b1d65
  Michael Geszkiewicz authored Sep 12, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  3b1b1d65
- epp: remove debug printf · 018b7fb9
  Michael Geszkiewicz authored Sep 12, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  018b7fb9
Sep 12, 2014
- libanyio: add reload function pointer to board struct and init it only when board support it · 7aff7e83
  Michael Geszkiewicz authored Sep 12, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  7aff7e83
- libanyio: reset eth boards through board struct interface not directly · 963234a2
  Michael Geszkiewicz authored Sep 12, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  963234a2
- libanyio: don't try to reset board if --program is not supported · ede61bb0
  Michael Geszkiewicz authored Sep 12, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  ede61bb0
- libanyio: don't SEGV when trying to access pci or epp boards without sudo · 7f2f378e
  Michael Geszkiewicz authored Sep 12, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  7f2f378e
- libanyio: measure erase, write and verify time more precisely · f8d75069
  Michael Geszkiewicz authored Sep 12, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  f8d75069
- Merge pull request #3 from jepler/spi · 991509f7
  Michael authored Sep 12, 2014
```
Spi support
```
  991509f7
- SPI: support SPI boards on Linux · c1e47dbd
  Jeff Epler authored Sep 08, 2014
```
This properly programs and verifies the eeprom on my SPI 7i90

typical commandline:
    mesaflash --device 7I90 --addr /dev/spidev1.0 --spi \
	--verify 7i90_spi_svst4_8.bit
```
  c1e47dbd
- libanyio: use default device address (0x378 for epp and 192.168.1.121 for eth)... · 6b5fc951
  Michael Geszkiewicz authored Sep 12, 2014
```
libanyio: use default device address (0x378 for epp and 192.168.1.121 for eth) if --addr option is missing in command line

Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  6b5fc951
- libanyio: Reduce overhead of verify operation (thanks jepler) · 39072c9b
  Michael Geszkiewicz authored Sep 11, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  39072c9b
- libanyio: print config flash erasing, writing and verifying time in verbose mode · 707e67a0
  Michael Geszkiewicz authored Sep 11, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  707e67a0
- libanyio: print bit file details only in verbose mode · 560680d3
  Michael Geszkiewicz authored Sep 11, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  560680d3
- mesaflash: warn user if he won't specify --device or --info along with other commands · 8b3b9e80
  Michael Geszkiewicz authored Sep 11, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  8b3b9e80
- change mesaflash main source file name to more reflecting it's content · 2cc0c15f
  Michael Geszkiewicz authored Sep 11, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  2cc0c15f
- add lost types.h to repo · 7f3c87c9
  Michael Geszkiewicz authored Sep 11, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  7f3c87c9
- libanyio: fix FPGA names for few boards · ef097896
  Michael Geszkiewicz authored Sep 10, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  ef097896
Sep 08, 2014
- libanyio: check ICAP cookie before attempting to reload firmware on pci cards · b7d97764
  Michael Geszkiewicz authored Sep 08, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  b7d97764
- libanyio: introduce types.h to hold global types definitions · c431de4f
  Michael Geszkiewicz authored Sep 07, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  c431de4f
Sep 07, 2014
- fix few typos · 1d60db72
  Michael Geszkiewicz authored Sep 07, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  1d60db72
- add --serial option to usage screen · f19b4ee2
  Michael Geszkiewicz authored Sep 07, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  f19b4ee2
- libanyio: update support for board 7i90HD · f940efb2
  Michael Geszkiewicz authored Sep 07, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  f940efb2
- fixes after rebase on master · defef052
  Michael Geszkiewicz authored Jul 18, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  defef052
- add support for serial lbp16 communication with 7i90 · 3ab90ca1
  Michael Geszkiewicz authored May 09, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  3ab90ca1
- libanyio: don't write and verify flash if bitfile destination part name is not... · 3055fd94
  Michael Geszkiewicz authored Sep 06, 2014
```
libanyio: don't write and verify flash if bitfile destination part name is not equal to current board fpga name

Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  3055fd94
- add support for 7i92 ethernet board · d9ee82ff
  Michael Geszkiewicz authored Sep 06, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  d9ee82ff
- libanyio: add ability to use --reload option together with --write to reload... · 628114b0
  Michael Geszkiewicz authored Sep 06, 2014
```
libanyio: add ability to use --reload option together with --write to reload FPGA just after flash write

Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  628114b0
- pci: run FPGA reset for boards which supports it (without config flash) · cffc9b47
  Michael Geszkiewicz authored Aug 16, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  cffc9b47
Sep 06, 2014
- Merge pull request #2 from SebKuzminsky/master · 06dbbe74
  Michael authored Sep 05, 2014
```
reduce debhelper compat requirement to 7
```
  06dbbe74
Sep 05, 2014
- reduce debhelper compat requirement to 7 · dead932e
  Sebastian Kuzminsky authored Aug 26, 2014
```
This lets the package build on Lucid.

Signed-off-by: Sebastian Kuzminsky <seb@highlab.com>
```
  dead932e
Aug 03, 2014
- update windows port · 4201cfb6
  micges authored Aug 03, 2014
  
  4201cfb6
Jul 25, 2014
- readhmid: fix SSI pin names · 27036652
  Michael Geszkiewicz authored Jul 25, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  27036652
- readhmid: Second attempt to fix output of readhmid when config have gpio only pins · 8a9fceb6
  Michael Geszkiewicz authored Jul 24, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  8a9fceb6
Jul 24, 2014
- readhmid: fix crash when output data from gpio only configs · 2313b306
  Michael Geszkiewicz authored Jul 24, 2014
```
Signed-off-by: Michael Geszkiewicz <micges@wp.pl>
```
  2313b306