Release Notes for WW10.5 2014 Higlandforest BSP Release

=======================================================

Explanation of files and directories included in this release :
----------------------------------------------------------------

meta-crystalforest-dora-10.0.0.tar.bz2              -- Compressed Archive of meta-intel directory.
meta-crystalforest-build-conf-dora-10.0.0.tar.bz2   -- bitbake build configuration (bblayer.conf & local.conf)
meta-crystalforest-dora-10.0.0.tar.bz2.md5sum       -- MD5 digest of meta-crystalforest-dora-10.0.0.tar.bz2
	   
For Binary folder:
core-image-sato-crystalforest-server.hddimg is the bootable image available in meta-intel/meta-crystalforest/binary 
for Highland Forest Server platform and also Crystal Forest Server platform.
core-image-sato-crystalforest-gladden.hddimg is the bootable image available in meta-intel/meta-crystalforest/binary for Crystal Forest gladden platform.

Note: following guideline from Yocto project, all prebuilt binary is time-limited kernel. This encourages Yocto user to
      build their own kernel image in their end product.


------------------------------------------------------------------


Instructions on how to use boot the Image are available in the 
meta-intel/meta-crystalforest/README.

This BSP was built with the following commit id:
poky/dora: d0e55dd0ef92fef31976edfb920a021c313fa14e
linux-yocto ver3.10 machine branch (64-bit): standard/common-pc-64/crystalforest:78afd3095c9b37efbbfbfdc25eb3833ef3c6a718
linux-yocto ver3.10 meta branch : meta:6e0e756d51372c8b176c5d1e6f786545bceed351

It is highly recommended to use the same commit ids before you build the Images.
It will not work with other commit ids.



================================================================
Supported Features: 

================================================================
- It supports legacy block drivers as below:-
      - 8259 PIC & APIC
      - 8254 System Timer
      - HPET
      - UART
      - Watchdog Timer
      - RTC
      - LPC
      - SMBus
      - USB
      - SATA
      - GBe
      - Serial 
	     - p/s: For Shumway-Rev D board, you need to change from ttyS0 to ttyS2 in syslinux.cfg in order to have serial port work properly.
 

================================================================
Change Log:

================================================================
Initial version