/***************************************************************************
* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
* Copyright (C) 2010 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program. If not, see . *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "imp.h"
#include
#include
#include
/* Flash registers */
#define FLASH_CR0 0x00000000
#define FLASH_CR1 0x00000004
#define FLASH_DR0 0x00000008
#define FLASH_DR1 0x0000000C
#define FLASH_AR 0x00000010
#define FLASH_ER 0x00000014
#define FLASH_NVWPAR 0x0000DFB0
#define FLASH_NVAPR0 0x0000DFB8
#define FLASH_NVAPR1 0x0000DFBC
/* FLASH_CR0 register bits */
#define FLASH_WMS 0x80000000
#define FLASH_SUSP 0x40000000
#define FLASH_WPG 0x20000000
#define FLASH_DWPG 0x10000000
#define FLASH_SER 0x08000000
#define FLASH_SPR 0x01000000
#define FLASH_BER 0x04000000
#define FLASH_MER 0x02000000
#define FLASH_LOCK 0x00000010
#define FLASH_BSYA1 0x00000004
#define FLASH_BSYA0 0x00000002
/* FLASH_CR1 register bits */
#define FLASH_B1S 0x02000000
#define FLASH_B0S 0x01000000
#define FLASH_B1F1 0x00020000
#define FLASH_B1F0 0x00010000
#define FLASH_B0F7 0x00000080
#define FLASH_B0F6 0x00000040
#define FLASH_B0F5 0x00000020
#define FLASH_B0F4 0x00000010
#define FLASH_B0F3 0x00000008
#define FLASH_B0F2 0x00000004
#define FLASH_B0F1 0x00000002
#define FLASH_B0F0 0x00000001
/* FLASH_ER register bits */
#define FLASH_WPF 0x00000100
#define FLASH_RESER 0x00000080
#define FLASH_SEQER 0x00000040
#define FLASH_10ER 0x00000008
#define FLASH_PGER 0x00000004
#define FLASH_ERER 0x00000002
#define FLASH_ERR 0x00000001
struct str7x_flash_bank {
uint32_t *sector_bits;
uint32_t disable_bit;
uint32_t busy_bits;
uint32_t register_base;
};
struct str7x_mem_layout {
uint32_t sector_start;
uint32_t sector_size;
uint32_t sector_bit;
};
enum str7x_status_codes {
STR7X_CMD_SUCCESS = 0,
STR7X_INVALID_COMMAND = 1,
STR7X_SRC_ADDR_ERROR = 2,
STR7X_DST_ADDR_ERROR = 3,
STR7X_SRC_ADDR_NOT_MAPPED = 4,
STR7X_DST_ADDR_NOT_MAPPED = 5,
STR7X_COUNT_ERROR = 6,
STR7X_INVALID_SECTOR = 7,
STR7X_SECTOR_NOT_BLANK = 8,
STR7X_SECTOR_NOT_PREPARED = 9,
STR7X_COMPARE_ERROR = 10,
STR7X_BUSY = 11
};
static const struct str7x_mem_layout mem_layout_str7bank0[] = {
{0x00000000, 0x02000, 0x01},
{0x00002000, 0x02000, 0x02},
{0x00004000, 0x02000, 0x04},
{0x00006000, 0x02000, 0x08},
{0x00008000, 0x08000, 0x10},
{0x00010000, 0x10000, 0x20},
{0x00020000, 0x10000, 0x40},
{0x00030000, 0x10000, 0x80}
};
static const struct str7x_mem_layout mem_layout_str7bank1[] = {
{0x00000000, 0x02000, 0x10000},
{0x00002000, 0x02000, 0x20000}
};
static int str7x_get_flash_adr(struct flash_bank *bank, uint32_t reg)
{
struct str7x_flash_bank *str7x_info = bank->driver_priv;
return str7x_info->register_base | reg;
}
static int str7x_build_block_list(struct flash_bank *bank)
{
struct str7x_flash_bank *str7x_info = bank->driver_priv;
int i;
int num_sectors;
int b0_sectors = 0, b1_sectors = 0;
switch (bank->size) {
case 16 * 1024:
b1_sectors = 2;
break;
case 64 * 1024:
b0_sectors = 5;
break;
case 128 * 1024:
b0_sectors = 6;
break;
case 256 * 1024:
b0_sectors = 8;
break;
default:
LOG_ERROR("BUG: unknown bank->size encountered");
exit(-1);
}
num_sectors = b0_sectors + b1_sectors;
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
str7x_info->sector_bits = malloc(sizeof(uint32_t) * num_sectors);
num_sectors = 0;
for (i = 0; i < b0_sectors; i++) {
bank->sectors[num_sectors].offset = mem_layout_str7bank0[i].sector_start;
bank->sectors[num_sectors].size = mem_layout_str7bank0[i].sector_size;
bank->sectors[num_sectors].is_erased = -1;
/* the reset_init handler marks all the sectors unprotected,
* matching hardware after reset; keep the driver in sync
*/
bank->sectors[num_sectors].is_protected = 0;
str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank0[i].sector_bit;
}
for (i = 0; i < b1_sectors; i++) {
bank->sectors[num_sectors].offset = mem_layout_str7bank1[i].sector_start;
bank->sectors[num_sectors].size = mem_layout_str7bank1[i].sector_size;
bank->sectors[num_sectors].is_erased = -1;
/* the reset_init handler marks all the sectors unprotected,
* matching hardware after reset; keep the driver in sync
*/
bank->sectors[num_sectors].is_protected = 0;
str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank1[i].sector_bit;
}
return ERROR_OK;
}
/* flash bank str7x 0 0
*/
FLASH_BANK_COMMAND_HANDLER(str7x_flash_bank_command)
{
struct str7x_flash_bank *str7x_info;
if (CMD_ARGC < 7)
return ERROR_COMMAND_SYNTAX_ERROR;
str7x_info = malloc(sizeof(struct str7x_flash_bank));
bank->driver_priv = str7x_info;
/* set default bits for str71x flash */
str7x_info->busy_bits = (FLASH_LOCK | FLASH_BSYA1 | FLASH_BSYA0);
str7x_info->disable_bit = (1 << 1);
if (strcmp(CMD_ARGV[6], "STR71x") == 0)
str7x_info->register_base = 0x40100000;
else if (strcmp(CMD_ARGV[6], "STR73x") == 0) {
str7x_info->register_base = 0x80100000;
str7x_info->busy_bits = (FLASH_LOCK | FLASH_BSYA0);
} else if (strcmp(CMD_ARGV[6], "STR75x") == 0) {
str7x_info->register_base = 0x20100000;
str7x_info->disable_bit = (1 << 0);
} else {
LOG_ERROR("unknown STR7x variant: '%s'", CMD_ARGV[6]);
free(str7x_info);
return ERROR_FLASH_BANK_INVALID;
}
str7x_build_block_list(bank);
return ERROR_OK;
}
/* wait for flash to become idle or report errors.
FIX!!! what's the maximum timeout??? The documentation doesn't
state any maximum time.... by inspection it seems > 1000ms is to be
expected.
10000ms is long enough that it should cover anything, yet not
quite be equivalent to an infinite loop.
*/
static int str7x_waitbusy(struct flash_bank *bank)
{
int err;
int i;
struct target *target = bank->target;
struct str7x_flash_bank *str7x_info = bank->driver_priv;
for (i = 0 ; i < 10000; i++) {
uint32_t retval;
err = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), &retval);
if (err != ERROR_OK)
return err;
if ((retval & str7x_info->busy_bits) == 0)
return ERROR_OK;
alive_sleep(1);
}
LOG_ERROR("Timed out waiting for str7x flash");
return ERROR_FAIL;
}
static int str7x_result(struct flash_bank *bank)
{
struct target *target = bank->target;
uint32_t flash_flags;
int retval;
retval = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_ER), &flash_flags);
if (retval != ERROR_OK)
return retval;
if (flash_flags & FLASH_WPF) {
LOG_ERROR("str7x hw write protection set");
retval = ERROR_FAIL;
}
if (flash_flags & FLASH_RESER) {
LOG_ERROR("str7x suspended program erase not resumed");
retval = ERROR_FAIL;
}
if (flash_flags & FLASH_10ER) {
LOG_ERROR("str7x trying to set bit to 1 when it is already 0");
retval = ERROR_FAIL;
}
if (flash_flags & FLASH_PGER) {
LOG_ERROR("str7x program error");
retval = ERROR_FAIL;
}
if (flash_flags & FLASH_ERER) {
LOG_ERROR("str7x erase error");
retval = ERROR_FAIL;
}
if (retval == ERROR_OK) {
if (flash_flags & FLASH_ERR) {
/* this should always be set if one of the others are set... */
LOG_ERROR("str7x write operation failed / bad setup");
retval = ERROR_FAIL;
}
}
return retval;
}
static int str7x_protect_check(struct flash_bank *bank)
{
struct str7x_flash_bank *str7x_info = bank->driver_priv;
struct target *target = bank->target;
int i;
uint32_t flash_flags;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
int retval;
retval = target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVWPAR), &flash_flags);
if (retval != ERROR_OK)
return retval;
for (i = 0; i < bank->num_sectors; i++) {
if (flash_flags & str7x_info->sector_bits[i])
bank->sectors[i].is_protected = 0;
else
bank->sectors[i].is_protected = 1;
}
return ERROR_OK;
}
static int str7x_erase(struct flash_bank *bank, int first, int last)
{
struct str7x_flash_bank *str7x_info = bank->driver_priv;
struct target *target = bank->target;
int i;
uint32_t cmd;
uint32_t sectors = 0;
int err;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
for (i = first; i <= last; i++)
sectors |= str7x_info->sector_bits[i];
LOG_DEBUG("sectors: 0x%" PRIx32 "", sectors);
/* clear FLASH_ER register */
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
if (err != ERROR_OK)
return err;
cmd = FLASH_SER;
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
if (err != ERROR_OK)
return err;
cmd = sectors;
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR1), cmd);
if (err != ERROR_OK)
return err;
cmd = FLASH_SER | FLASH_WMS;
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
if (err != ERROR_OK)
return err;
err = str7x_waitbusy(bank);
if (err != ERROR_OK)
return err;
err = str7x_result(bank);
if (err != ERROR_OK)
return err;
for (i = first; i <= last; i++)
bank->sectors[i].is_erased = 1;
return ERROR_OK;
}
static int str7x_protect(struct flash_bank *bank, int set, int first, int last)
{
struct str7x_flash_bank *str7x_info = bank->driver_priv;
struct target *target = bank->target;
int i;
uint32_t cmd;
uint32_t protect_blocks;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
protect_blocks = 0xFFFFFFFF;
if (set) {
for (i = first; i <= last; i++)
protect_blocks &= ~(str7x_info->sector_bits[i]);
}
/* clear FLASH_ER register */
int err;
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
if (err != ERROR_OK)
return err;
cmd = FLASH_SPR;
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
if (err != ERROR_OK)
return err;
cmd = str7x_get_flash_adr(bank, FLASH_NVWPAR);
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), cmd);
if (err != ERROR_OK)
return err;
cmd = protect_blocks;
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), cmd);
if (err != ERROR_OK)
return err;
cmd = FLASH_SPR | FLASH_WMS;
err = target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
if (err != ERROR_OK)
return err;
err = str7x_waitbusy(bank);
if (err != ERROR_OK)
return err;
err = str7x_result(bank);
if (err != ERROR_OK)
return err;
return ERROR_OK;
}
static int str7x_write_block(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct str7x_flash_bank *str7x_info = bank->driver_priv;
struct target *target = bank->target;
uint32_t buffer_size = 32768;
struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
struct reg_param reg_params[6];
struct arm_algorithm arm_algo;
int retval = ERROR_OK;
/* see contib/loaders/flash/str7x.s for src */
static const uint32_t str7x_flash_write_code[] = {
/* write: */
0xe3a04201, /* mov r4, #0x10000000 */
0xe5824000, /* str r4, [r2, #0x0] */
0xe5821010, /* str r1, [r2, #0x10] */
0xe4904004, /* ldr r4, [r0], #4 */
0xe5824008, /* str r4, [r2, #0x8] */
0xe4904004, /* ldr r4, [r0], #4 */
0xe582400c, /* str r4, [r2, #0xc] */
0xe3a04209, /* mov r4, #0x90000000 */
0xe5824000, /* str r4, [r2, #0x0] */
/* busy: */
0xe5924000, /* ldr r4, [r2, #0x0] */
0xe1140005, /* tst r4, r5 */
0x1afffffc, /* bne busy */
0xe5924014, /* ldr r4, [r2, #0x14] */
0xe31400ff, /* tst r4, #0xff */
0x03140c01, /* tsteq r4, #0x100 */
0x1a000002, /* bne exit */
0xe2811008, /* add r1, r1, #0x8 */
0xe2533001, /* subs r3, r3, #1 */
0x1affffec, /* bne write */
/* exit: */
0xeafffffe, /* b exit */
};
/* flash write code */
if (target_alloc_working_area_try(target, sizeof(str7x_flash_write_code),
&write_algorithm) != ERROR_OK) {
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
uint8_t code[sizeof(str7x_flash_write_code)];
target_buffer_set_u32_array(target, code, ARRAY_SIZE(str7x_flash_write_code),
str7x_flash_write_code);
target_write_buffer(target, write_algorithm->address, sizeof(code), code);
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
if (buffer_size <= 256) {
/* we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
arm_algo.common_magic = ARM_COMMON_MAGIC;
arm_algo.core_mode = ARM_MODE_SVC;
arm_algo.core_state = ARM_STATE_ARM;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
init_reg_param(®_params[4], "r4", 32, PARAM_IN);
init_reg_param(®_params[5], "r5", 32, PARAM_OUT);
while (count > 0) {
uint32_t thisrun_count = (count > (buffer_size / 8)) ? (buffer_size / 8) : count;
target_write_buffer(target, source->address, thisrun_count * 8, buffer);
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, str7x_get_flash_adr(bank, FLASH_CR0));
buf_set_u32(reg_params[3].value, 0, 32, thisrun_count);
buf_set_u32(reg_params[5].value, 0, 32, str7x_info->busy_bits);
retval = target_run_algorithm(target, 0, NULL, 6, reg_params,
write_algorithm->address,
write_algorithm->address + (sizeof(str7x_flash_write_code) - 4),
10000, &arm_algo);
if (retval != ERROR_OK)
break;
if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00) {
retval = str7x_result(bank);
break;
}
buffer += thisrun_count * 8;
address += thisrun_count * 8;
count -= thisrun_count;
}
target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
destroy_reg_param(®_params[4]);
destroy_reg_param(®_params[5]);
return retval;
}
static int str7x_write(struct flash_bank *bank, const uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
uint32_t dwords_remaining = (count / 8);
uint32_t bytes_remaining = (count & 0x00000007);
uint32_t address = bank->base + offset;
uint32_t bytes_written = 0;
uint32_t cmd;
int retval;
uint32_t check_address = offset;
int i;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset & 0x7) {
LOG_WARNING("offset 0x%" PRIx32 " breaks required 8-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
for (i = 0; i < bank->num_sectors; i++) {
uint32_t sec_start = bank->sectors[i].offset;
uint32_t sec_end = sec_start + bank->sectors[i].size;
/* check if destination falls within the current sector */
if ((check_address >= sec_start) && (check_address < sec_end)) {
/* check if destination ends in the current sector */
if (offset + count < sec_end)
check_address = offset + count;
else
check_address = sec_end;
}
}
if (check_address != offset + count)
return ERROR_FLASH_DST_OUT_OF_BANK;
/* clear FLASH_ER register */
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
/* multiple dwords (8-byte) to be programmed? */
if (dwords_remaining > 0) {
/* try using a block write */
retval = str7x_write_block(bank, buffer, offset, dwords_remaining);
if (retval != ERROR_OK) {
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
/* if block write failed (no sufficient working area),
* we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
} else {
return retval;
}
} else {
buffer += dwords_remaining * 8;
address += dwords_remaining * 8;
dwords_remaining = 0;
}
}
while (dwords_remaining > 0) {
/* command */
cmd = FLASH_DWPG;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
/* address */
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
/* data word 1 */
target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0),
4, 1, buffer + bytes_written);
bytes_written += 4;
/* data word 2 */
target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1),
4, 1, buffer + bytes_written);
bytes_written += 4;
/* start programming cycle */
cmd = FLASH_DWPG | FLASH_WMS;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
int err;
err = str7x_waitbusy(bank);
if (err != ERROR_OK)
return err;
err = str7x_result(bank);
if (err != ERROR_OK)
return err;
dwords_remaining--;
address += 8;
}
if (bytes_remaining) {
uint8_t last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
/* copy the last remaining bytes into the write buffer */
memcpy(last_dword, buffer+bytes_written, bytes_remaining);
/* command */
cmd = FLASH_DWPG;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
/* address */
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
/* data word 1 */
target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0),
4, 1, last_dword);
/* data word 2 */
target_write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1),
4, 1, last_dword + 4);
/* start programming cycle */
cmd = FLASH_DWPG | FLASH_WMS;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
int err;
err = str7x_waitbusy(bank);
if (err != ERROR_OK)
return err;
err = str7x_result(bank);
if (err != ERROR_OK)
return err;
}
return ERROR_OK;
}
static int str7x_probe(struct flash_bank *bank)
{
return ERROR_OK;
}
#if 0
COMMAND_HANDLER(str7x_handle_part_id_command)
{
return ERROR_OK;
}
#endif
static int get_str7x_info(struct flash_bank *bank, char *buf, int buf_size)
{
/* Setting the write protection on a sector is a permanent change but it
* can be disabled temporarily. FLASH_NVWPAR reflects the permanent
* protection state of the sectors, not the temporary.
*/
snprintf(buf, buf_size, "STR7x flash protection info is only valid after a power cycle, "
"clearing the protection is only temporary and may not be reflected in the current "
"info returned.");
return ERROR_OK;
}
COMMAND_HANDLER(str7x_handle_disable_jtag_command)
{
struct target *target = NULL;
struct str7x_flash_bank *str7x_info = NULL;
uint32_t flash_cmd;
uint16_t ProtectionLevel = 0;
uint16_t ProtectionRegs;
if (CMD_ARGC < 1)
return ERROR_COMMAND_SYNTAX_ERROR;
struct flash_bank *bank;
int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
if (ERROR_OK != retval)
return retval;
str7x_info = bank->driver_priv;
target = bank->target;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* first we get protection status */
uint32_t reg;
target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR0), ®);
if (!(reg & str7x_info->disable_bit))
ProtectionLevel = 1;
target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR1), ®);
ProtectionRegs = ~(reg >> 16);
while (((ProtectionRegs) != 0) && (ProtectionLevel < 16)) {
ProtectionRegs >>= 1;
ProtectionLevel++;
}
if (ProtectionLevel == 0) {
flash_cmd = FLASH_SPR;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFB8);
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), 0xFFFFFFFD);
flash_cmd = FLASH_SPR | FLASH_WMS;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
} else {
flash_cmd = FLASH_SPR;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFBC);
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0),
~(1 << (15 + ProtectionLevel)));
flash_cmd = FLASH_SPR | FLASH_WMS;
target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
}
return ERROR_OK;
}
static const struct command_registration str7x_exec_command_handlers[] = {
{
.name = "disable_jtag",
.usage = "",
.handler = str7x_handle_disable_jtag_command,
.mode = COMMAND_EXEC,
.help = "disable jtag access",
},
COMMAND_REGISTRATION_DONE
};
static const struct command_registration str7x_command_handlers[] = {
{
.name = "str7x",
.mode = COMMAND_ANY,
.help = "str7x flash command group",
.usage = "",
.chain = str7x_exec_command_handlers,
},
COMMAND_REGISTRATION_DONE
};
const struct flash_driver str7x_flash = {
.name = "str7x",
.commands = str7x_command_handlers,
.flash_bank_command = str7x_flash_bank_command,
.erase = str7x_erase,
.protect = str7x_protect,
.write = str7x_write,
.read = default_flash_read,
.probe = str7x_probe,
.auto_probe = str7x_probe,
.erase_check = default_flash_blank_check,
.protect_check = str7x_protect_check,
.info = get_str7x_info,
.free_driver_priv = default_flash_free_driver_priv,
};