From 468a4b65ea3c68cffd36918f6b3ea6f44659d336 Mon Sep 17 00:00:00 2001 From: Spencer Oliver Date: Wed, 27 Feb 2013 12:48:11 +0000 Subject: flash: fix stm32 failed probe using incorrect flash size This fixes an issue if the device is manually probed after the initial probe fails due to being unable to read flash size register. In this situation the driver assumes the user has overridden the flash size when infact this may not be the case. It also seems on the older stm32f1 devices the flash register is not readable when locked, this does not seem to apply to the newer parts - f0, f3, f4. Change-Id: I125f872fcb2d962ca6705f97b62d957e2b31303b Signed-off-by: Spencer Oliver Reviewed-on: http://openocd.zylin.com/1187 Tested-by: jenkins Reviewed-by: Johan Almquist Reviewed-by: Freddie Chopin --- src/flash/nor/stm32f1x.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'src/flash/nor/stm32f1x.c') diff --git a/src/flash/nor/stm32f1x.c b/src/flash/nor/stm32f1x.c index 8f2e69e..7e32098 100644 --- a/src/flash/nor/stm32f1x.c +++ b/src/flash/nor/stm32f1x.c @@ -125,6 +125,7 @@ struct stm32x_flash_bank { uint16_t default_rdp; int user_data_offset; int option_offset; + uint32_t user_bank_size; }; static int stm32x_mass_erase(struct flash_bank *bank); @@ -147,6 +148,7 @@ FLASH_BANK_COMMAND_HANDLER(stm32x_flash_bank_command) stm32x_info->probed = 0; stm32x_info->has_dual_banks = false; stm32x_info->register_base = FLASH_REG_BASE_B0; + stm32x_info->user_bank_size = bank->size; return ERROR_OK; } @@ -963,9 +965,9 @@ static int stm32x_probe(struct flash_bank *bank) /* if the user sets the size manually then ignore the probed value * this allows us to work around devices that have a invalid flash size register value */ - if (bank->size) { + if (stm32x_info->user_bank_size) { LOG_INFO("ignoring flash probed value, using configured bank size"); - flash_size_in_kb = bank->size / 1024; + flash_size_in_kb = stm32x_info->user_bank_size / 1024; } LOG_INFO("flash size = %dkbytes", flash_size_in_kb); -- cgit v1.1