From 28ad1a14546ef6eb4a77c11a977d785e50e1f51a Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Mon, 17 Oct 2022 00:08:52 +0200 Subject: doc: fix espusbjtag commands type Exec commands should be reported as {Command}. Change-Id: Iacb50d77b354617ecd24b0f1c2ec24e240179698 Signed-off-by: Antonio Borneo Reviewed-on: https://review.openocd.org/c/openocd/+/7267 Tested-by: jenkins Reviewed-by: Erhan Kurubas --- doc/openocd.texi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'doc') diff --git a/doc/openocd.texi b/doc/openocd.texi index b603a46..1768e45 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -3504,11 +3504,11 @@ Espressif JTAG driver to communicate with ESP32-C3, ESP32-S3 chips and ESP USB B These chips have built-in JTAG circuitry and can be debugged without any additional hardware. Only an USB cable connected to the D+/D- pins is necessary. -@deffn {Config Command} {espusbjtag tdo} +@deffn {Command} {espusbjtag tdo} Returns the current state of the TDO line @end deffn -@deffn {Config Command} {espusbjtag setio} setio +@deffn {Command} {espusbjtag setio} setio Manually set the status of the output lines with the order of (tdi tms tck trst srst) @example espusbjtag setio 0 1 0 1 0 -- cgit v1.1