From 8b4e882a1630d63bbc9840fa3f968e36b6ac3702 Mon Sep 17 00:00:00 2001 From: drath Date: Fri, 2 Jun 2006 10:36:31 +0000 Subject: - prepare OpenOCD for branching, created ./trunk/ git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- README | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 README (limited to 'README') diff --git a/README b/README new file mode 100644 index 0000000..30445f1 --- /dev/null +++ b/README @@ -0,0 +1,49 @@ + openocd + + Free and Open On-Chip Debugging, In-System Programming + and Boundary-Scan Testing + Copyright (c) 2004, 2005 Dominic Rath + +The debugger uses an IEEE 1149-1 compliant JTAG TAP bus master to access on-chip +debug functionality available on ARM7 and ARM9 based microcontrollers / +system-on-chip solutions. + +User interaction is realized through a telnet command line interface and a gdb +(The GNU Debugger) remote protocol server. + +Initially, support for two JTAG TAP bus master interfaces with public hardware +schematics will be included, but support of additional hardware is an expressed +goal. + +1. JTAG hardware + +Currently, openocd contains support for Wiggler-compatible paralell port +dongles and a USB interface based on the FTDI FT2232, called USBJTAG-1. +A new version of the USB interface, USB-JTAG v1.2, is available with complete +schematics (http://www.fh-augsburg.de/~hhoegl/proj/volksmikro/usb-jtag/050910/). + +It was tested using Amontec's (www.amontec.com) Chameleon POD in it's +Wiggler configuration, but homemade wigglers should work just as well. +In order to use the reset functionality (warm-reset, debug from reset, reset +and init), the choosen Wiggler has to connect the nSRST line. + +USBJTAG-1 is based on a FTDI DLP2232M module and a few additional parts. +Schematics are freely available. USB-JTAG v1.2 doesn't use the DLP2232M, but +has the FTDI chip soldered directly on the PCB. There are two drivers for these +modules implemented, one using the open source libftdi, the other using FTDI's +proprietary FTD2XX library. + +2. Supported cores + +This version of openocd supports the following cores: + +- ARM7TDMI +- ARM9TDMI + +Support for cores with MMUs (ARM720t, ARM920t) is currently being merged. + +3. Licensing + +openocd is licensed under the terms of the GNU General Public License, see the +file COPYING for details. + -- cgit v1.1