aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)AuthorFilesLines
2009-09-16Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family ↵oharboe2-0/+170
(ARM968E). git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-13Magnus Lundin <lundin@mlu.mine.nu> Disable poll while core register ↵oharboe1-0/+2
initialization git-svn-id: svn://svn.berlios.de/openocd/trunk@2703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-12David Brownell <david-b@pacbell.net> oharboe3-4/+96
Update the board config for the DaVinci DM355 EVM so the reset-init event handler does the rest of the work it should do: - minor PLL setup bugfixes - initialize the DDR2 controller - probe both NAND banks - initialize UART0 - enable the icache git-svn-id: svn://svn.berlios.de/openocd/trunk@2699 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11tap post reset event added. Allows omap3530 to send 100 runtest idle ↵oharboe1-0/+2
tickle's after a TAP_RESET. git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11- revert change made to sheevaplug.cfg in rev2573ntfreak1-1/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@2695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11syntax error fixoharboe1-0/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@2689 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-10michal smulski <michal.smulski@ooma.com> telo target/board scriptsoharboe5-30/+1396
git-svn-id: svn://svn.berlios.de/openocd/trunk@2683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effectsoharboe3-4/+5
git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04Dirk Behme <dirk.behme@googlemail.com> retire jtag_speed usageoharboe1-2/+0
git-svn-id: svn://svn.berlios.de/openocd/trunk@2671 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.oharboe1-0/+3
git-svn-id: svn://svn.berlios.de/openocd/trunk@2670 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04set ARM mode using explicit command rather than soft_reset_halt which has ↵oharboe1-1/+1
lots of side effects. git-svn-id: svn://svn.berlios.de/openocd/trunk@2669 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanupoharboe45-49/+54
git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04David Claffey <dnclaffey@gmail.com> get rid of reset recursionoharboe1-3/+4
git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-02David Claffey <dnclaffey@gmail.com> tested with the Atheros reference design ↵oharboe1-0/+56
"PB44" git-svn-id: svn://svn.berlios.de/openocd/trunk@2662 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-02Crusty Code fixes from the tcl directory re-arragementsduane3-22/+22
git-svn-id: svn://svn.berlios.de/openocd/trunk@2661 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-31Gary Carlson <gcarlson@carlson-minot.com> config fileoharboe1-0/+204
git-svn-id: svn://svn.berlios.de/openocd/trunk@2657 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-31Ferdinand Postema <ferdinand@postema.eu> config script for the MMnet1001 ↵oharboe1-0/+83
module from Propox. git-svn-id: svn://svn.berlios.de/openocd/trunk@2656 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-28David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have ↵oharboe4-6/+0
TRST signals, so defining ntrst_delay is pointless; don't. At least the LM3S3748 eval board doesn't need nsrst_delay either; remove that too. git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25Ferdinand Postema <ferdinand@postema.eu> increase reset delay to fix ↵oharboe1-1/+1
regression from 2600 to 2604 git-svn-id: svn://svn.berlios.de/openocd/trunk@2614 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25Brian Findlay <findlaybrian@gmail.com> finalize mini2440.cfgoharboe1-3/+2
git-svn-id: svn://svn.berlios.de/openocd/trunk@2611 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25use cortex_a8 instead of cortex_m3oharboe1-3/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@2610 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-21Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the ↵oharboe4-129/+5
right spots. Should have been done in previous commit. git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-21native line endingsoharboe5-284/+284
git-svn-id: svn://svn.berlios.de/openocd/trunk@2603 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-21Pieter Conradie <Pieter.Conradie@psitek.com> Scripts for Atmel AT91SAM7S256 ↵oharboe5-0/+284
and AT91SAM9260 git-svn-id: svn://svn.berlios.de/openocd/trunk@2602 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18Brian Findlay <findlaybrian@gmail.com> Board support for mini2440 ↵oharboe1-0/+321
(friendlyARM) samsung s3c2440 based board git-svn-id: svn://svn.berlios.de/openocd/trunk@2593 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18- add cfg file for Amontec JTAGKey2 jtag interfacentfreak1-0/+11
git-svn-id: svn://svn.berlios.de/openocd/trunk@2592 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18David Brownell <david-b@pacbell.net> Cleanup the Stellaris target configs:oharboe5-59/+21
- remove endianness options; these chips hard-wire "little" - $_TARGETNAME updates: * don't pass $_TARGETNAME where a TAP label is required * flash config uses $_TARGETNAME (it might not be target #0) * simplify one $_TARGETNAME construction - update work area setup: * remove VM spec; these chips have no VM! * fix some wrong sizes (0x4000 == 16K, not 4K) * simplify: take defaults - comment fixups git-svn-id: svn://svn.berlios.de/openocd/trunk@2589 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16Xiaofan Chen <xiaofanc@gmail.com> Split LM3S811 config file into target file ↵oharboe2-12/+21
and board file git-svn-id: svn://svn.berlios.de/openocd/trunk@2584 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16michal smulski <michal.smulski@ooma.com> arm11 target config filesoharboe2-0/+74
git-svn-id: svn://svn.berlios.de/openocd/trunk@2583 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16Xiaofan Chen <xiaofanc@gmail.com> Add config file for TI-Luminary LM3S1968 ↵oharboe2-0/+58
chip and EK-LM3S1968 board git-svn-id: svn://svn.berlios.de/openocd/trunk@2582 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-13Audrius Urmanavičius [didele.deze@gmail.com]:ntfreak2-0/+57
Add flash programming support for NXP LPC1700 cortex_m3 based family git-svn-id: svn://svn.berlios.de/openocd/trunk@2579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-06- Bring all the ftdi names inline in the cfg scripts. scripts will now work ↵ntfreak18-18/+18
for either ftd2xx or libftdi drivers. git-svn-id: svn://svn.berlios.de/openocd/trunk@2573 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-22Jonathan Cameron <jic23@cam.ac.uk> fix regression from 1836 when the ↵oharboe1-0/+2
reset_config command was removed from pxa270.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@2557 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-22Stefano Voulaz <s.voulaz@projecktstudio.com> first cut samsung_s3c2450 oharboe1-0/+49
git-svn-id: svn://svn.berlios.de/openocd/trunk@2556 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-12Peter Denison <openwrt@marshadder.org> workaround for broken USBprog w/short ↵oharboe1-1/+3
tms sequences git-svn-id: svn://svn.berlios.de/openocd/trunk@2509 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10David Brownell <david-b@pacbell.net> split EK board support outoharboe2-24/+28
from the target CPU support . git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08sharpen reset_config for imx27 - use both trst & srst. srst pulls trst.oharboe2-1/+3
git-svn-id: svn://svn.berlios.de/openocd/trunk@2493 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07srst pulls trst according to Freescale docs for i.mx27oharboe1-2/+7
git-svn-id: svn://svn.berlios.de/openocd/trunk@2492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06David Brownell <david-b@pacbell.net> Update docs to say that "arm7_9 dbgrq ↵oharboe3-3/+0
enable" is the default on ARM9 cores, and update the DaVinci config files so they no longer explicitly specify it. git-svn-id: svn://svn.berlios.de/openocd/trunk@2484 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06bitrot: fix numerous syntax errors oharboe1-8/+6
added correct jtag device id git-svn-id: svn://svn.berlios.de/openocd/trunk@2467 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02Xiaofan Chen <xiaofanc@gmail.com> With this patch, OpenOCD can talk to myoharboe1-2/+2
Analog Device Eval-ADuC7060 eval board. git-svn-id: svn://svn.berlios.de/openocd/trunk@2459 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02Remove vim editor commands from TCL files.zwelch5-10/+0
git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02David Brownell <david-b@pacbell.net>:zwelch2-13/+10
Prepare the DaVinci PLL code to support the version 0x0E module used in newer chips (e.g. dm365): rename the original code so it's specific to version 0x02 PLL modules, and update the dm355evm code to use that new name. Fix two minor bugs in that version 2 code: sysclk3 setup used the sysclk2 divider address (affecting video processing on dm355, no worry for now) and sysclk2 setup had a syntax error. Also minor fixups to dm355evm, mostly to permit use of RTCK. git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-01- add stm32 connectivity line tapid to stm32.cfgntfreak1-1/+3
git-svn-id: svn://svn.berlios.de/openocd/trunk@2440 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Add svn:eol-style native property to TCL files that are missing it.zwelch2-31/+31
git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Remove executable bits from at91sam3 configuration files.zwelch8-0/+0
git-svn-id: svn://svn.berlios.de/openocd/trunk@2432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30freddie_chopin@op.pl fix handling of workareaoharboe2-10/+6
git-svn-id: svn://svn.berlios.de/openocd/trunk@2431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Marcel Jost <marcel.jost@bfh.ch>:zwelch3-0/+69
This patch adds support for the Luminary Micro LM3S9B90 target and LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a new ft2232 layout called "luminary_icdi". git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29Kevin Bortis <stm32@bortis.ch> fix worksizeoharboe2-1/+12
git-svn-id: svn://svn.berlios.de/openocd/trunk@2419 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29David Brownell <david-b@pacbell.net>:zwelch1-1/+1
Minor bugfix ... previous version was tested *with* ICEpick active. The "-disable" can swap with "-enable"; but not with an empty string. git-svn-id: svn://svn.berlios.de/openocd/trunk@2418 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.1 at 2024-08-22 04:57:49 +0000