aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)AuthorFilesLines
2014-06-28cortex_m: Do additional initialization during resetAndrey Smirnov1-4/+0
SAM4L requires additional steps to be taken right after SYSRESETREQ is issued in order to function robustly: - CMSIS-DAP DAP driver needs to explicitly check for sticky bit errors since it is possible for adapter to perform successful write opration, report no errors and then, under the hood, do some other things that will result in sticky bit being set. - Debugger needs to wait for security system to finish intialization and assert CDBGPWRUPACK before proceeding This change is related to commit http://openocd.zylin.com/#/c/1995/ Change-Id: I741c95a809bfd60d930cec9482239e4796a62326 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2088 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
2014-06-28tcl: introduce using_(jtag|swd|hla) helpers and use them in reset handlerPaul Fertser12-24/+19
Barely tested with plain SWD transport. Change-Id: I48b59136bf4294ffed737dba01f1b30ef83aa86b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2003 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-22tcl/target/fm3.cfg: use a CHIPNAME known by the flash driverPaul Fertser1-2/+2
fm3 flash driver needs to know which chip variant is used. This fixes "unknown fm3 variant: mb9bf500.cpu" error if the config is used as is. Change-Id: I500fcfb413f23ee246678cec5bd19d14139a28e2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2160 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22openrisc: add support for JTAG Serial PortFranck Jullien2-2/+7
Change-Id: I623a8c74bcca2edb5f996b69c02d73a6f67b7d34 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/2162 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22tcl/target/am335x.cfg: Drop gdb-attach stanzaTom Rini1-6/+0
This isn't needed nor a recommended practice now, was a simple copy/paste from amdm37x.cfg anyhow. Change-Id: I064226dc859d7563cfad945b577279fc37448645 Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2068 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-19cfg: Added Nucleo-F334R8 board config.Nemui Trinomius1-0/+9
It supports STLink/V2-1. Change-Id: I0a8c01247a7a0165321818ca222479e3ae67ce5c Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2175 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-18tcl/board: add Atmel SAM4E-EKMarco Cruz1-0/+7
Change-Id: I07d7e0528ed4e88b070ba4e7598a193ec8e9e37d Signed-off-by: Marco Cruz <marco.caratuva@gmail.com> Reviewed-on: http://openocd.zylin.com/2158 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01tcl/target/kl25.cfg: add maximum speed specificationPaul Fertser1-0/+11
Maximum frequency wasn't tested on hardware but the docs seem to be quite explicit and do not mention any restrictions for that. Change-Id: Idcf58df5358d06525e683f07c76eedad8f0b292d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2120 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01tcl: add ASUS RT-N66U configPaul Fertser3-0/+27
CFI flashing verified with real hardware. RAM configuration wasn't attempted. Change-Id: I9185ab71430d799793befef708a15f62edba1663 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2153 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-16KS869x: add new targetYegor Yefremov1-0/+34
This patch adds Micrel's KS869x target. The configuration was taken from http://www.mmnt.net/db/0/0/www.micrel.com/ethernet/8695 - Micrel's FTP server i.e. their OpenOCD 7.0 package. The only change compared to the original file is the removal of reset configuration, as it belongs to the board configuration. Change-Id: Ic8509aa5fe5ce3166a3129e1c055280a3b2b9312 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-on: http://openocd.zylin.com/2125 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-10kinetis: Revise CPU un-securing codeAndrey Smirnov2-0/+16
Old version of the code had several problems, among them are: * Located in a generic ADI source file instead of some Kinetis specific location * Incorrect MCU detection code that would read generic ARM ID registers * Presence of SRST line was mandatory * There didn't seem to be any place where after SRST line assertion it would be de-asserted. * Reset was asserted after waiting for "Flash Controller Ready" bit to be set, which contradicts official programming guide AN4835 * Mass erase algorithm implemented by that code was very strange: ** After mass erase was initiated instead of just polling for the state of "Mass Erase Acknowledged" bit the code would repeatedly initiate mass erase AND poll the state of the "Mass Erase Acknowledged" ** Instead of just polling for the state of "Flash Mass Erase in Progress"(bit 0 in Control register) to wait for the end of the mass erase operation the code would: write 0 to Control register, read out Status register ignoring the result and then read Control register again and see if it is zero. * dap_syssec_kinetis_mdmap assumed that previously selected(before it was called) AP was 0. This commit moves all of the code to kinetis flash driver and introduces three new commands: o "kinetis mdm check_security" -- the intent of that function is to be used as 'examine-end' hook for any Kinetis target that has that kind of JTAG/SWD security mechanism. o "kinetis mdm mass_erase"" -- This function removes secure status from MCU be performing special version of flash mass erase. o "kinetis mdm test_securing" -- Function that allows to test securing fucntionality. All it does is erase the page with flash security settings thus making MCU 'secured'. New version of the code implements the algorithms specified in AN4835 "Production Flash Programming Best Practices for Kinetis K- and L-series MCUs", specifically sections 4.1.1 and 4.2.1. It also adds KL26 MCU to the list of devices for which this security check is performed. Implementing that algorithm also allowed to simplify mass command in kinetis driver, since we no longer need to write security bytes. The result that the old version of mass erase code can now be acheived using 'kinetis mdm mass_erase' Tested on accidentally locked FRDM-KL26Z with KL26 Kinetis MCU. Change-Id: Ic085195edfd963dda9d3d4d8acd1e40cc366b16b Signed-off-by: Andrey Smrinov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2034 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-05generalplus: Add configuration file for General Plus GP326XXXA seriesAndrey Smirnov1-0/+94
Add configuration file for General Plus GP326XXXA series. Tested on GP326833A on GPC-1737B board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: I1ad0e22598b01317bbc823870a7a262e9192c595 Reviewed-on: http://openocd.zylin.com/2058 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-05Add support for Gumstix AeroCore deviceAsh Charles1-0/+10
The Gumstix AeroCore board [1] contains a STM32F427 microcontroller. Schematics for this board will also be made available [2]. The JTAG interface for this chip can be accessed via a USB connection provided by an FTDI chip (0403:6011). [1] https://store.gumstix.com/index.php/products/585/ [2] https://pubs.gumstix.com/boards/AEROCORE Change-Id: I0bf3bb525f51528bedd807b1f7210b09ef2e1015 Signed-off-by: Ash Charles <ashcharles@gmail.com> Reviewed-on: http://openocd.zylin.com/2117 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14cortex_a: fix endiannes issues on TI TMS570Seth LaForge1-0/+3
The TI TMS470 and TMS570 series of processors are BE-32 processors, despite BE-32 not being supported by ARM in the Cortex-R4 core. TI hacked in BE-32 support, which requires odd swizzling in OpenOCD to make memory reads and writes function correctly. In particular, without this change, OpenOCD word reads and writes had the bytes reversed, and halfword and byte packed reads were reading garbage. In my testing, this change fixes these problems. Change-Id: I21dd30f4b9003f20fcc85f674ab833407bb61f74 Signed-off-by: Seth LaForge <sethml@google.com> Reviewed-on: http://openocd.zylin.com/2064 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14tcl: bcm6348 target config, BT HomeHub v1 board configLee Bowyer3-0/+25
Also add the board to the firmware recovery script. Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0 Signed-off-by: Lee Bowyer <lee@sodnpoo.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29tcl/target: make milandr configs swd-compatiblePaul Fertser2-14/+23
Change-Id: Ibb34f0d7829b205341bcce511ffc2624bdfe2c75 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1962 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29nrf51: Add UICR writing supportAndrey Smirnov1-2/+2
SoftDevice stack ihex binary, provided by Nordic expects being able to write data necessary for its correct operation at the adresses inside UICR. This patch exposes UICR region of flash as a second bank on the MCU to facilitate that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: Idbc140b8de027f60655f78043877b7c054eb06f9 Reviewed-on: http://openocd.zylin.com/2013 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29cfg: or1k_generic: allow TAP_TYPE overrideFranck Jullien1-1/+4
This patch allows users to specify TAP_TYPE from the command line when using or1k_generic.cfg. Change-Id: I9f4b7d8e4867658fa34bb4e92fc3a5f25227df11 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/2056 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29tcl: add Zynq-7000 target and Zedboard board configsTim Sander2-0/+36
Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1 Signed-off-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2061 Tested-by: jenkins
2014-03-29cfg: add TI am43xx devicesFelipe Balbi2-0/+61
This adds support for the am43xx SoC and the AM437x GP EVM and AM438x ePOS EVM. Change-Id: I09cbb09072f38e0e08fdd520dedb6e67d45056be Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2047 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-17cfg: Added st nucleo board configs.Jens Hoffmann3-0/+27
This patch adds board configs for Nucleo FXXX boards. Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8 Signed-off-by: Jens Hoffmann <jehoffma@gmail.com> Reviewed-on: http://openocd.zylin.com/2022 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17tcl: target: icepick: add icepick_d_tapenable procedureFelipe Balbi2-22/+25
instead of replicating icepick_d_tapenable in many of TI's newer platforms, we can move to icepick.cfg and just call it from board TCL configuration file. This is similar to the C but has a few changes we need to make. Change-Id: I0ab48005ccd66cd5b67b919fb5e3b462288f211d Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2030 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-17tcl/interface/ftdi: add Digilent JTAG-SMT2 configPaul Fertser1-0/+17
Tested on ZedBoard by Tim Sander. Change-Id: I4316d9b4d36f01bbe91a46c78ea8bca22efb1a5a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2029 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17cfg: change default SAM4L cortex_m reset_configSpencer Oliver1-0/+3
From testing this target does not seem to support using SYSRESETREQ, change the default to the safe VECTRESET. This target also has other reset issues (srst not working) that will be addressed in another patch. Change-Id: Icfc78347dc71aa3a062ddea63190a818d7fbc760 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1995 Tested-by: jenkins Reviewed-by: Angus Gratton <gus@projectgus.com>
2014-03-17Make the Atmel SAM3 family SWD-awareJörg Wunsch1-13/+26
Atmel's SAM3 and SAM4 processor families are very close to each other in many respects. However, so far, only the SAM4 target script contained the magic to allow using SWD, while SAM3 was tied to JTAG only. This e.g. prevented the CMSIS-DAP driver from accessing SAM3 devices as it only uses SWD transport (by now). The patch pulls all the things from the SAM4 target script that are also applicable to SAM3 devices. With the patch, an Atmel CMSIS-DAP debugger (Atmel-ICE) was proven to be able to successfully attach to a SAM3S-EK evaluation kit. I also cross-checked that accessing through a SAM-ICE (Segger J-Link) still works with the patch. Change-Id: I20dafbff8e1e9f967da950e48a56205586eeef8d Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-on: http://openocd.zylin.com/2046 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17tcl/board: add config for DP Bus Blaster reconfigurationPaul Fertser1-0/+13
Reported and tested by Gracana on IRC. Change-Id: If0524d2d627d566e8b5e1d00784dd7556f44b125 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2036 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-17stlink_usb.c: add support for STLink V2-1Bartosz Bielawski1-0/+9
The new version of STLink (V2-1) has a different USB endpoint layout. As the PID of the device also changed it's possible to change EPs used by OpenOCD in runtime. The patch adds three new fields to stlink_usb_handle_s and assigns right EP numbers in stlink_usb_open(). Parts of the code inspired by and used with consent of Jens Hoffmann. Change-Id: I93b69fb889f15317e9bf864905f435905db39745 Signed-off-by: Bartosz Bielawski <bartosz.bielawski@gmail.com> Reviewed-on: http://openocd.zylin.com/2019 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-09bcm281xx: Add bcm281xx SoC and bcm28155_ap boardTim Kryger2-0/+42
Add support for Broadcom's dual A9 mobile SoC and its reference board. Change-Id: Ia145b120043bddc89c44726066023154ae390788 Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-on: http://openocd.zylin.com/1926 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-09interface/ftdi/xds100v2.cfg: Add another VID/PID, drop descTom Rini1-2/+1
The XDS100v2 is often embedded in a number of platforms using the VID/PID of 0x0403/0x6010 and a generic FTDI device description. Add this VID/PID combination and remove the description line. Change-Id: I370e6199ac24f802426e9541e19ee38f18f1209a Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2016 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-07cfg: Switch ti_beaglebone to new ftdi interfaceTom Rini1-4/+1
Tested on Beagelbone White. Change-Id: I544d7c1ba21a6bd594c0a1c4a9611639fa3c320d Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2017 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-04Add support for the Atmel SAMG53Andrey Yurovsky2-0/+18
flash: at91sam4: add support for the SAMG53 family (this also covers the SAMG51). The SAMG5x parts have an EEFC (enhanced embedded flash controller) which seems to be identical to the EFC that the sam4 driver supports. Add a script for the Xplained Pro G53 board, this has the onboard CMSIS-DAP debugger and a SAMG53N19. Tested on this board and chip combination. Change-Id: I12af50402cd2069b3c7380d92e6fe54816d6c045 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1974 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24nrf51: Implement the support for Nordic's nRF51 devicesAndrey Smirnov1-0/+70
Add support for Nordic's nRF51 chip series. Tested with nRF51822. Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1945 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24cfg: Make stm32f4x usable with SWD transportFatih Aşıcı1-13/+13
Change-Id: Ib8f3b414ec3c31cf8a112e75efe003e2237c59bb Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1951 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2014-02-11quark_x10xx: add new target quark_x10xxAdrian Burns2-0/+61
Intel Quark X10xx SoC debug support added Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC Generic x86 32-bit code is in x86_32_common.c/h Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368 Signed-off-by: adrian.burns@intel.com Reviewed-on: http://openocd.zylin.com/1829 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-11interface/ftdi/xds100v2.cfg: default to reset state and ask user to release ↵Paul Fertser1-1/+3
it later This adapter is special and needs a reset sequence to be performed before operation. Since there're no suitable hooks to do that, we have no choice but to ask the user to manually add the necessary commands to his or her config file. Change-Id: I48fb4276e77529768266840221b68c3ae26801e1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1884 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-04interface/ftdi: add TUMPA Lite configPaul Fertser1-0/+12
TUMPA Lite is a cheap FT232H-based breakout board, without any buffering. It also lacks series resistors so for some targets (especially when not using ridiculously short wires) one needs to add about 47 Ohms in series on every high-speed line. The SRST line is connected directly to the FT232H too. Real-life tested (including SRST and TRST). Change-Id: I5ed4f88d8d20384e9c52efe2ff0c290e2650d43e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1918 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-29cfg: LPC17xx default to using SYSRESETREQ to reset targetSpencer Oliver1-3/+3
Originally the LPC17xx user guide (UM10360 Rev 2) stated that SYSRESETREQ was not supported, so this was the default cortex_m reset mode. Rev 3 of the same user guide states that it is now supported. This has been verified on a LPC1768 mbed platform, previously I have not tested this functionality. Change-Id: I4858248903981a1c93ce75016e67c9e02702fcc5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1892 Tested-by: jenkins Reviewed-by: Jörg Fischer <turboj@gmx.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-20jtag/drivers: add USB-Blaster IIFranck Jullien1-0/+8
This patchs adds a new access driver for the existing USB-Blaster interface driver. This interface (as it is build-in on the sockit development board) is composed of a Cypress EZ-USB plus a CPLD. The Cypress chip as an embedded 8051 microcontroller. When it's powered up, the firmware is downloaded to the chip then the device is disconnected and reconnected with the new firmware. The USB-Blaster II protocol is almost identicial to the old one. The only difference is that you need to send a 0x5F before read TDO back. This command seems to copy TDO buffer datas to the endpoint buffer. Driver will be auto enabled if libusb-1.0 is detected. Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1791 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-20cfg: add Freescale FRDM-KL46Z BoardSpencer Oliver2-0/+61
Change-Id: Ib585728f13a380eeeb2ada095f3e1a1c2aaf44cb Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1866 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-15Atmel samd: add support for SAMD21Andrey Yurovsky1-0/+10
Tested with SAMD21J18A on the SAMD21 Xplained Pro board. Change-Id: Ice9ebcd229ed038b3193baf92d910f9256d7ce91 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1873 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAMD NOR FlashAndrey Yurovsky1-1/+2
This adds a new NOR Flash driver, "at91samd", which supports the built-in Flash on Atmel's D-series Cortex M MCUs, starting with the D20. Parts and their geometry are detected automatically using the DSU and lookup schemes described in the D20 document, 42129F–SAM–10/2013. Future D-series variants and families should presumably use this controller as well (possibly with minor changes and improvements). Tested on the SAMD20 Xplained Pro board, for which we also add the corresponding Flash configuration. Change-Id: Id8d3dd601e9f53121682d1a1190d0be4ea3b83eb Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1684 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAM4L NOR FlashAndrey Yurovsky1-1/+3
This adds a new NOR Flash driver, "at91sam4l", which supports the built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs. Parts and their geometry are detected automatically using the Chip ID and lookup schemes described in document 42023E–SAM–07/2013. Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit. Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1639 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09cfg: add initial Atmel xplained kit supportSpencer Oliver8-15/+129
These kits feature a CMSIS-DAP compliant debugger and so have been added as part of the pending support. Currently the flash drivers for the L8 and D20 are wip. One issue this implementation of CMSIS-DAP raised is that it supports 512byte HID reports, however using the current HIDAPI we have no cross platform way of querying this info. Long term we plan to add this support to HIDAPI. Change-Id: Ie8b7c871f58a099d963cd71a9f8a0105a38784e9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1625 Tested-by: jenkins
2014-01-09cfg: add stm32 cmsis-dap compliant configSpencer Oliver8-26/+152
Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1543 Tested-by: jenkins
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver8-7/+150
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2014-01-08tcl/netgear-dg834v3.cfg: add to easy firmware recovery listPaul Fertser2-0/+7
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1851 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tools: add firmware recovery helpersPaul Fertser1-0/+108
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/board: add Linksys WRT54GL v1.1 board configPaul Fertser2-0/+22
Tested flashing a real v1.1 device. Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1852 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl: add bcm47xx config and Asus RT-N16 board using itPaul Fertser3-0/+41
This adds the bcm47xx config with the special undocumented trick to put it into standard EJTAG mode from the mystic "LV mode". The RAM setup is not done as it would require considerable efforts without much practical gain. The only issue I noticed so far is that "reset" doesn't actually reset the chip. Unfortunately, it's unclear how to make it work properly with SRST as OpenOCD asserts it in MIPS-specific code so the device will enter LV mode again but the LV tap is already disabled by that time, so it's not possible to send the magic command again. Anyway, this config is more than enough to "recover" any RT-N16 provided the hardware is not damaged. Change-Id: I0894e339763e6d20d1c93341c597382b479d039b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1849 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Update URLs and names in amdm37x.cfg, no functional changes.Robert P. J. Day1-16/+16
* openocd.berlios.de -> openocd.sourceforge.net * Update link to AM/DM37x Technical Reference Manual (ver R) * "ICEpick" is properly spelled "ICEPick" according to TI Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1856 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.1 at 2024-10-21 05:34:25 +0000