aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)AuthorFilesLines
2013-03-13interface: opendous_ftdi config file addedRodrigo Melo1-0/+15
This config file add support to the opendous cable based on the chip ft2232H, using the ft2232 interface driver. Change-Id: I8171a0c475af8d61e081844ee86466a392138fb0 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1096 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-07interface: opendous_ftdi config file addedRodrigo Melo1-0/+17
This config file add support to the opendous cable based on the chip ft2232H, using the ftdi interface driver. Change-Id: I4491f99d7b14f7078a04583ef0c4acd8692c4349 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-06cfg: add Netgear DG834v3 configurationSpencer Oliver2-0/+44
Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1189 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06cfg: add basic support of Freescale i.MX6 series targetsVladimir Zapolskiy1-0/+56
This change adds a simple target configuration for Freescale single/dual/quad core i.MX6 SoCs, only one core is configured by default. Change-Id: I853dd27f4c6765b7f731be2ddea82e85d496c6a4 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-on: http://openocd.zylin.com/1135 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-05Change reset configuration.Mathias K1-3/+6
This patch change the default reset config from SYSRESETREQ to the working VECTRESET. Change-Id: I21a9a74b9c0c68cfa3a6e6dac9b123acc98a93cb Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1186 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-25stm32: add support for the STM32Lx 384kb dual bank flashJohan Almquist2-0/+21
This update adds support for the STM32Lx 384kb dual bank flash. Previously there was a problem when writing an image that was larger than 192Kb. That lead to openocd printing out two error messages like "Error: access denied / write protected" and "Error: invalid program address". The reason was that the stm32lx driver tried to write half pages which overlapped into the next flash bank. A new configuration file stm32lx_dual_bank.cfg can be used for stm32lx chips with dual bank flash (256kb or 384kb devices). A sanity check was added for probed flash size values to fix the issue seen on some ST samples that answered incorrectly. Change-Id: I69e25131983d88613be8606b438f98870c5f1e52 Signed-off-by: Johan Almquist <johan.almquist@assaabloy.com> Reviewed-on: http://openocd.zylin.com/1125 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-08jtag_interface: .speed can be NULL when not neededFranck Jullien7-17/+0
adapter_init (core.c) won't check speed configuration of the selected interface if it's not needed (.speed = NULL). When it's not needed, we can now omit adapter_khz in init scripts and we don't have to implement dummy handlers for speed_div and khz functions. It also removes calls to adapter_khz in interface configuration files when not used anymore. Change-Id: I6eb1894385503fede542a368f297cec6565eed44 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1131 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-01-14flash: EFM32 flash implementationRoman D1-0/+38
Limited (no page unprotect, no block writes) implementation of EFM32 flash support. Verified with EFM32 development kit and STLink V2 adapter using SWD. Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c Signed-off-by: Roman D <me@iamroman.org> Reviewed-on: http://openocd.zylin.com/1106 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-12-30cfg: increase stm32l-discovery working areaSpencer Oliver1-0/+1
This part has 16k ram so make it all available. Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1006 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30cfg: stm32l use minimum family ram size for working areaSpencer Oliver2-3/+3
The smallest pert in the family has 10k RAM, so use that as a default for the working area. Change-Id: I78be0d14a254c109ac15a7163552c6132f810416 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1005 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30cfg: enable stlink stm32l HSISpencer Oliver1-0/+15
Switch to using the internal HSI when a reset init is called, this also matches the std stm32l cfg. Read (verify) speed is increased from 17 to 120 KiB/s. Change-Id: Ic94ba85949ffdefa17b7be45eef14e30f941d107 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1004 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-23icdi: add TI icdi interfaceSpencer Oliver4-4/+70
This is the new proprietary interface replacing the older FTDI based adapters. It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad. Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/922 Tested-by: jenkins
2012-12-23stlink: rename stlink cmd namesSpencer Oliver3-13/+25
As part of the switch to using the hla for the stlink interface we rename the cmds to a more generic name. Update scripts to match new names. Also add handlers for deprecated names. Change-Id: I6f00743da746e3aa13ce06acfdc93c8049545e07 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/921 Tested-by: jenkins
2012-12-23stlink: use common layoutSpencer Oliver2-2/+2
Even though the stlinkv1 and stlinkv2 use different usb classes they share the same layout scheme. Merge the two into a common layout, thus enabling us to support other adapter layouts. Change-Id: I7d02c44a7f94ebc7f2cb5428b02ee40294fb430d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/918 Tested-by: jenkins
2012-12-11LPC1788 target configuration file.is2t1-0/+20
Change-Id: I68bd6b7c19d9d1bee13d0921c32b4490e68ab8f2 Signed-off-by: is2t <devel@is2t.com> Reviewed-on: http://openocd.zylin.com/1002 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-11-16Pic32mx.cfg: Change system clock to 8Mhz after reset-init.Salvador Arroyo1-0/+14
As for openocd 0.6.0-rc2 the function mips32_pracc_fastdata_xfer() should now work at a scan frequency up to 1200Khz. Mainly usefull to increase programming speed. Also verify_image should be slightly faster. Change-Id: I1e9b2be73690a4597e2f6ba069c1205026850f07 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/805 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06Added support for NXP LPC1850 MicrocontrollerGianluca Renzi1-0/+31
Added a new configuration file for LPC18xx based boards, such as HitexLPC1850RevA Evaluation Board, and all other based on the same microcontroller by NXP. Change-Id: I68c3827be535b6d09a5c70b6d57191937d00354d Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Reviewed-on: http://openocd.zylin.com/930 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06Generic LPC1850 board w/ SPIFI flash.Gianluca Renzi1-0/+18
This config file is intended as an example of how to use the lpcspifi flash driver, but it should be functional for most LPC1850 boards utilizing SPIFI flash. Change-Id: I855854282336701fd210134497ce014017f3aaec Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Reviewed-on: http://openocd.zylin.com/929 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-28ftdi/flyswatter2.cfg: Define the LED signalPeter Stuge1-0/+1
Change-Id: Ic5d85c0d855bcffba54de7df6cff4d726656af97 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/940 Tested-by: jenkins
2012-10-28ftdi/flyswatter2.cfg: Fix the signal layoutPeter Stuge1-8/+3
Change-Id: If6612af25fa3562f49e9c8ccff01b6ef0af5ceb0 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/938 Tested-by: jenkins
2012-10-02lpc1768-stick: avoid driving srst high at startupSpencer Oliver1-1/+1
this avoid driving nSRST high after startup, by making sure the nOE is initialized inactive/high. This also matches the config used for the STM32-PerformanceStick. Change-Id: I9376de575b7dc834310d57dbd58575d51f60183e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/878 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: cortino tested and workingSpencer Oliver1-5/+0
Change-Id: I13534742c76ebbb05b47bf98768c997068da747a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/851 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect cortino reset configSpencer Oliver1-2/+2
The cortino uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I28f6781bccae24de79aa6a03161f298a14fe2581 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/850 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: ftdi icdi enable srst open drain configSpencer Oliver1-1/+1
Change-Id: I21a115121f167dc88cd9bf2d1ca1ac9f3e1110d7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/848 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: update ti/stellaris url'sSpencer Oliver6-9/+16
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/879 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: lm3s811ek config tested and workingSpencer Oliver1-5/+0
Change-Id: I5402b5521d6e1ef0a569f5cad02c003681f5444b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/847 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32-performance stick configSpencer Oliver1-2/+2
This hardware uses a output enable buffer that was not correctly defined. Fixes issues when using the new ftdi driver. Change-Id: Iba6235a71a6d3c7d16ab729f858b336a4574dfea Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/844 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: stm32-performance stick config tested and workingSpencer Oliver1-5/+0
Change-Id: I9852d11e369e501af240a2b8e9f74306aee4e4a0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/845 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add ti ek-lm3s9d92 configSpencer Oliver1-0/+14
Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/853 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add ti ek-lm3s8962 configSpencer Oliver1-0/+15
Change-Id: I753cec80a904130088b00b3f81b6dd61808662d6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/852 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: str9-comstick tested and workingSpencer Oliver1-5/+0
Change-Id: Ia6c45477381e78cb9508b4731438161e18be1f38 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/843 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add STM32F3-DISCOVERY board supportSpencer Oliver1-0/+9
Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/810 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: fix incorrect str9-comstick reset configSpencer Oliver1-2/+2
The str9-comstick uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/842 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32f3 TAPIDSpencer Oliver1-1/+1
Change-Id: Id66d4e03a77c47a49086ee753bed01b3944064e1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/855 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26Added SPIFI flash driver, algorithms, and docsGeorge Harris1-0/+18
Added a flash driver designed to allow program/erase of memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros. This driver includes three algorithms - erase, write, and SPIFI peripheral initialization (to allow memory-mapped access after a reset). The driver has been added to the flash driver table (drivers.c), and the OpenOCD documentation has been updated to include the flash driver configuration command. Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26drivers: new jtag bitbang driver using sysfs gpioMarc Reilly1-0/+24
This driver implements a bitbang jtag interface using gpio lines exported via sysfs. The aim of this driver implementation is to use system GPIOs but to avoid the need for an additional kernel driver. A config suitable for RaspberryPi is included. Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Reviewed-on: http://openocd.zylin.com/762 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Add JTAG-lock-pick Tiny 2 config filesFreddie Chopin2-0/+24
DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip and layout similar to KT-LINK. Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/787 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29cfg: update for target's that support cortex_m AIRCR SYSRESETREQSpencer Oliver7-0/+29
If the target supports SYSRESETREQ make sure we use that as the default if srst is not fitted/configured. Change-Id: I24c907493134506320e69c1218702930629c1cdc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/792 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24ftdi: Olimex ARM-USB-TINY validatedAurelien Jacobs1-6/+0
Flashing a CFI flash and debugging with gdb work fine. Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/770 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-14cfg: remove duplicate Olimex ARM-USB-OCD configSpencer Oliver1-11/+0
This file is already included as olimex-arm-usb-ocd.cfg. Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/780 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-09cfg: added new openocd-usb highspeed adapterAndrew Karpow2-0/+24
The embedded projects shop released a new highspeed version of the openocd-usb adapter. These configuration files adds support for it. Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28 Signed-off-by: Andrew Karpow <notandyk@gmail.com> Reviewed-on: http://openocd.zylin.com/771 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-01added target configs for the lpc17xx devicesVandra Akos12-0/+248
lpc1751, lpc1752, lpc1754, lpc1756, lpc1758, lpc1759 lpc1763, lpc1764, lpc1765, lpc1766, lpc1767, lpc1768, lpc1769 Change-Id: I740b66930cd379c9390f3c1031cdbada747a6ce4 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/676 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-08-01cfg: Add Hitex LPC1768-Stick using ftdi driverJoerg Fischer2-0/+30
Add cfg files for Hitex LPC1768 Stick Website: http://www.hitex.com/?id=1602 This board has a FTDI2232D as JTAG interface, using the same layout as the Hitex STM32-PerformanceStick but with different USB PID. Main MCU is a LPC1768 from NXP. The interface config uses the ftdi driver instead of ft2232. The corresponding ft2232 layout would be "stm32stick". Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7 Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/763 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin21-0/+411
part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/750 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin7-0/+139
part 3 - files that are currently untested but verified with schematics Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/755 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin8-0/+164
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work fine Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/754 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin9-0/+149
part 1 - files that were tested an verified as working fine Change-Id: If5986853a1cf118a9eb3b4c13b036d0f71c39624 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/534 Tested-by: jenkins
2012-07-30lpc1768.cfg abstracted and moved to lpc17xx.cfgVandra Akos2-76/+100
- Moved variant-independent code to lpc17xx.cfg, which will be included from lpc17??.cfg files automatically. - lpc1768.cfg filled with variant-dependent code. Change-Id: I7dabe6ed7da7be640ed38c13aaaa096b8796d9a0 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/675 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30cfg: remove deprecated stm32 target configsAndreas Fritiofson2-6/+0
These were deprecated in commit 69ac20a. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id: I047872f8cd61b42aaca6588ab75566219e4a3f5d Reviewed-on: http://openocd.zylin.com/741 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-19board: Add TI AM335x Evaluation ModuleTom Rini1-0/+10
This patch adds the TI AM335x Evaluation Module (ti_am335xevm) board configuration file. Change-Id: Id3529e54972f8acd8c790ad55c8d0f4058a1a1f6 Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/753 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.1 at 2024-09-27 16:02:29 +0000