aboutsummaryrefslogtreecommitdiff
path: root/tcl/target
AgeCommit message (Expand)AuthorFilesLines
2010-11-09TCL scripts: replace "puts" with "echo"Antonio Borneo7-131/+131
2010-11-09lpc3131: target definitionAndrew Leech1-0/+76
2010-11-06TCL scripts: add support for ST SPEAr310Antonio Borneo1-0/+41
2010-11-05CortexA8: Introduce Freescale i.MX51 variantMarek Vasut1-0/+51
2010-10-25Make systesetreq typos read sysresetreq insteadPeter Stuge1-1/+1
2010-10-25Remove srst_pulls_trst from LPC1768 targetPeter Stuge1-3/+0
2010-10-10swj-dp.tcl (SWD infrastructure #1)David Brownell3-1/+44
2010-09-26Fix omap3_dbginit to write to physical memory.Zachary T Welch1-1/+1
2010-09-21TCL scripts: collect duplicated proceduresAntonio Borneo3-35/+3
2010-09-20AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.Karl Kurbjun1-0/+203
2010-09-14board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013Takács Áron1-1/+7
2010-08-31cortex m3: add cortex_m3 reset_config cmdSpencer Oliver1-6/+37
2010-08-31cfg: update Luminary config filesSpencer Oliver4-101/+7
2010-08-19imx35pdk: fix clock and reset delaysØyvind Harboe1-0/+1
2010-08-17mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe1-12/+4
2010-08-15avr32: basic target scriptOleksandr Tymoshenko1-0/+18
2010-08-15at32ap7000 config fileDavid Brownell1-0/+16
2010-08-13lpc1768: turn down the jtag clockØyvind Harboe1-7/+9
2010-08-12DM36x: Set OSCDIV dividerThomas Koeller1-0/+7
2010-08-12DM36x: Disable unused SYSCLKsThomas Koeller1-1/+20
2010-08-12DM36x: Use enable bit for PLL pre-dividerThomas Koeller1-1/+1
2010-08-11tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe2-5/+5
2010-08-11config scripts: remove useless reference to OpenOCD docsØyvind Harboe8-24/+0
2010-08-10cfg: add omapl138 support and da850evm preliminary supportBen Gardiner1-0/+66
2010-08-02lpc1768: even if rclk "works", it isn't necessarily the correct clkØyvind Harboe1-2/+6
2010-08-01Remove srst_pulls_trst from LPC2148 targetPeter Stuge1-1/+1
2010-07-30lpc7168: make flash available upon reset initØyvind Harboe1-0/+19
2010-07-17lm3s811-ek uses generic stellaris target configDavid Brownell1-29/+0
2010-07-13cfg: add Avalue RSC-W910 configSpencer Oliver1-0/+27
2010-06-25at91sam3s* supportOlaf Lüke3-36/+73
2010-06-15DM36x: pll & clock setupThomas Koeller1-0/+127
2010-06-15arm1136 scriptsmichal smulski1-1/+2
2010-05-26cfg: add pic32 virtual banksSpencer Oliver1-0/+7
2010-05-24There are no variants of arm7tdmi targetFreddie Chopin7-7/+7
2010-05-24All LPC2xxx chips are little endian and that cannot be changed - update confi...Freddie Chopin7-53/+8
2010-05-24add correct CPUTAPID value for LPC2129Freddie Chopin1-6/+2
2010-05-24Update "flash bank" helper comments for LPC2xxx chipsFreddie Chopin8-7/+8
2010-05-24LPC23xx and LPC24xx after reset run on internal 4MHz RC oscillator, so "flash...Freddie Chopin1-1/+1
2010-05-21at91sam9260: use RCLKØyvind Harboe1-19/+12
2010-05-18at91rm9200 : reset_config should go to the board config fileMarc Pignat1-2/+0
2010-05-13scripts: update flash bank namesSpencer Oliver6-12/+12
2010-04-24telo: update configuration scripts to matched master branchmichal smulski3-64/+3
2010-03-26TCL scripts: update to current "flash bank" syntaxAntonio Borneo1-1/+1
2010-03-16PIC32: add Microchip Explorer16 cfgSpencer Oliver1-4/+1
2010-03-15rename jtag_nsrst_assert_width as adapter_nsrst_assert_widthDavid Brownell1-1/+1
2010-03-15rename jtag_nsrst_delay as adapter_nsrst_delayDavid Brownell34-36/+36
2010-03-15rename jtag_khz as adapter_khzDavid Brownell18-35/+35
2010-03-15PIC32MX: update cfg scriptSpencer Oliver1-10/+23
2010-03-10PIC32: add flash algorithm supportSpencer Oliver1-4/+12
2010-03-02LPC1768 updates, IAR board supportDavid Brownell1-25/+27