aboutsummaryrefslogtreecommitdiff
path: root/src/transport
AgeCommit message (Collapse)AuthorFilesLines
2018-05-08configure: disable all drivers when zy1000 is enabledPaul Fertser1-4/+1
This also fixes the transport_is_hla FIXME. Change-Id: I33960f373f11e3e203f9aed9c6d02bf7ca48ac97 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/4473 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-03-20transport: add transport_is_hla()Tomas Vanek1-0/+19
and move declaration of all transport_is_xxx() functions to transport.h Change-Id: Ib229115b5017507b49655bc43b517ab6fb32f7a6 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4469 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2016-12-08Convert to non-recursive makeAndreas Fritiofson1-11/+4
Change-Id: I11f8bc8553957e2ff083c09e72e16881e4d3bb6f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3865 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-05-24Make #include guard naming consistentMarc Schink1-3/+3
Change-Id: Ie13e8af0bb74ed290f811dcad64ad06c9d8cb4fa Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2956 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-24Remove FSF address from GPL noticesMarc Schink2-4/+2
Also make GPL notices consistent according to: https://www.gnu.org/licenses/gpl-howto.html Change-Id: I84c9df40a774958a7ed91460c5d931cfab9f45ba Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3488 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-03-25transport: make 'transport select' auto-select the first available transport ↵Angus Gratton1-9/+22
if not set This should allow most of the existing configurations for older versions to remain compatible without forcing the user to change his or her config to explicitly select transport. Also in some circumstances can remove the need to chain a "-c transport select X" when building custom configs on the command line, which seems like a common new user pitfall. Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d Suggested-by: Petteri Aimonen <jpa@git.mail.kapsi.fi> Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2551 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09transport: clarify error message when transport is not selectedKarl Palsson1-3/+4
When no transport is selected, the error message dumps the available transports, but not how to actually select one. Change-Id: I63da2a4b59e3f6cc8d30bd631e41a82636a056ef Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-08-19transport: emit a warning when a user tries to reselect a transportPaul Fertser1-3/+7
Even though changing transport is impossible, reselecting it should be harmless. Change-Id: I6c1c2786134e826f47f848b590e6d712b6fd2206 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2251 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-08-11Allow transports to override the selected target (hla configs unification)Paul Fertser1-0/+8
This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28transport: Constify the transports vectorAndreas Fritiofson2-4/+4
Change-Id: I0c874b5d4c97cf781d83bd381d701f770e069f72 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2135 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-30Don't cast return value of [cm]allocAndreas Fritiofson1-1/+1
Change-Id: I0028a5b6757b1ba00031893d9a2a1725f915a0d5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2069 Tested-by: jenkins Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver2-2/+2
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2012-03-30transport: remove interface multiple transport warningSpencer Oliver1-8/+9
Currently if we have multiple transport's defined we receive an warning similar to: must select a transport. allow transport 'jtag' allow transport 'swd This removes that warning and only prints this info if transport_init fails. Change-Id: I87126390f234bc2f705e1f150a0dcc110dcab151 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/532 Tested-by: jenkins
2012-02-06build: cleanup src/transport directorySpencer Oliver1-55/+44
Change-Id: If73da1a7272602314f042c3e3c0e61050530998d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/411 Tested-by: jenkins
2012-01-04command: print BUG warning when usage is missingMathias K1-0/+3
These error messages will prompt patches to be submitted for missing .usage or empty fields. All of the below must be resolved before next release. The Jim defined commands are excluded from this checklist because the help text can be set later than during command registration. strlen(.usage) == 0 means that the command expects no arguments. Updates to this patch in Gerrit to fix problems below are most welcome. Anyone can push updated versions of a patch to Gerrit. If there are no further updates to this patch within a week, it will be pushed to the master branch to prompt more fixes. These were caught by launching OpenOCD. Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/299 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-06-13transport: move files over to transport folderØyvind Harboe3-0/+467
as we introduce swd and jtag as two transports, we want to start up with a new transport folder to organize the code a bit.
generated by cgit v1.1 at 2024-10-12 18:14:23 +0000