aboutsummaryrefslogtreecommitdiff
path: root/src/target/trace.c
AgeCommit message (Collapse)AuthorFilesLines
2016-05-24Remove FSF address from GPL noticesMarc Schink1-3/+1
Also make GPL notices consistent according to: https://www.gnu.org/licenses/gpl-howto.html Change-Id: I84c9df40a774958a7ed91460c5d931cfab9f45ba Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3488 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-05update files to correct FSF addressSpencer Oliver1-1/+1
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2012-02-06build: cleanup src/target directorySpencer Oliver1-36/+22
Change-Id: Ia055b6d2b5f6449a38afd0539a8c66e7d7e0c059 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/430 Tested-by: jenkins
2012-01-04command: print BUG warning when usage is missingMathias K1-0/+1
These error messages will prompt patches to be submitted for missing .usage or empty fields. All of the below must be resolved before next release. The Jim defined commands are excluded from this checklist because the help text can be set later than during command registration. strlen(.usage) == 0 means that the command expects no arguments. Updates to this patch in Gerrit to fix problems below are most welcome. Anyone can push updated versions of a patch to Gerrit. If there are no further updates to this patch within a week, it will be pushed to the master branch to prompt more fixes. These were caught by launching OpenOCD. Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/299 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2010-01-07target misc: help/usage updatesDavid Brownell1-6/+6
Provide helptext which was sometimes missing; update some of it to be more accurate. Usage syntax messages have the same EBNF as the User's Guide. Don't use "&function"; functions are like arrays, their address is their name. Shrink some overlong lines; remove some empties. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-02streamline and document helptext mode displaysDavid Brownell1-1/+1
Most commands are usable only at runtime; so don't bother saying that, it's noise. Moreover, tokens like EXEC are cryptic. Be more clear: highlight only the commands which may (also) be used during the config stage, thus matching the docs more closely. There are - Configuration commands (per documentation) - And also some commands that valid at *any* time. Update the docs to note that "help" now shows this mode info. This also highlighted a few mistakes in command configuration, mostly commands listed as "valid at any time" which shouldn't have been. This just fixes ones I noted when sanity testing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-03change #include "log.h" to <helper/log.h>Zachary T Welch1-1/+1
Changes from the flat namespace to heirarchical one. Instead of writing: #include "log.h" the following form should be used. #include <helper/log.h> The exception is from .c files in the same directory.
2009-11-24trace: use register_commands()Zachary T Welch1-10/+29
2009-11-24use COMMAND_REGISTER macroZachary T Welch1-3/+3
Replaces direct calls to register_command() with a macro, to allow its parameters to be changed and callers updated in phases.
2009-11-17command_handler: change 'cmd_ctx' to CMD_CTXZachary T Welch1-7/+7
Convert all command handler 'cmd_ctx' parameter usage with CMD_CTX.
2009-11-17command_handler: change 'args' to CMD_ARGVZachary T Welch1-4/+4
This patch converts all instances of 'args' in COMMAND_HANDLER routines to use CMD_ARGV macro.
2009-11-17command_handler: change to 'argc' to CMD_ARGCZachary T Welch1-2/+2
This patch converts all instances of 'argc' in COMMAND_HANDLER routines to use CMD_ARGC.
2009-11-13command_t -> struct commandZachary T Welch1-1/+1
Remove misleading typedef and redundant suffix from struct command.
2009-11-13command_context_t -> struct command_contextZachary T Welch1-1/+1
Remove misleading typedef and redundant suffix from struct command_context.
2009-11-13target_t -> struct targetZachary T Welch1-3/+3
Remove misleading typedef and redundant suffix from struct target.
2009-11-13trace_t -> struct traceZachary T Welch1-3/+3
Remove misleading typedef and redundant suffix from struct trace.
2009-11-13trace_point_t -> struct trace_pointZachary T Welch1-1/+1
Remove misleading typedef and redundant suffix from struct trace_point.
2009-11-13use COMMAND_HANDLER macro to define all commandsZachary T Welch1-2/+2
2009-11-05Improve trace command argument parsing.Zachary T Welch1-2/+4
2009-06-23Remove whitespace at end of lines, step 1.zwelch1-15/+15
- Replace '\s*$' with ''. git-svn-id: svn://svn.berlios.de/openocd/trunk@2379 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace that occurs before ')'.zwelch1-1/+1
- Replace '[ \t]*[)]' with ')'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2377 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace that occurs after '('.zwelch1-1/+1
- Replace '([ \t]*' with '('. git-svn-id: svn://svn.berlios.de/openocd/trunk@2376 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-21C99 printf() -Werror fixesduane1-7/+7
git-svn-id: svn://svn.berlios.de/openocd/trunk@2327 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-18Cast 64-bit trace hit_counter to long long; fixes format warning.zwelch1-1/+1
What is the correct way to handle this? git-svn-id: svn://svn.berlios.de/openocd/trunk@2285 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-18Transform 'u32' to 'uint32_t' in src/targetzwelch1-7/+7
- Replace '\([^_]\)u32' with '\1uint32_t'. - Replace '^u32' with 'uint32_t'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2279 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-05remove unused include file: inttypes.hoharboe1-2/+0
git-svn-id: svn://svn.berlios.de/openocd/trunk@2072 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-21David Brownell <david-b@pacbell.net>: This patch adds annotations tozwelch1-1/+1
the key command_*() helper functions, fixng the bugs that turned up. Several of these bugs were from misuse of PRIi64; that's for 64-bit integers, NOT for "long long" or "u64" (which work best with %lld). git-svn-id: svn://svn.berlios.de/openocd/trunk@1873 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-11Audit and eliminate redundant #include directives in other target files.zwelch1-4/+0
git-svn-id: svn://svn.berlios.de/openocd/trunk@1715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-30Add static keywords to core target source file data and functions.zwelch1-2/+2
git-svn-id: svn://svn.berlios.de/openocd/trunk@1579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-19Zach Welch <zw@superlucidity.net> fix -Werror warningsoharboe1-5/+5
git-svn-id: svn://svn.berlios.de/openocd/trunk@1472 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-18Hiroshi Ito <ito@mlb.co.jp> fix division by 0oharboe1-1/+5
git-svn-id: svn://svn.berlios.de/openocd/trunk@1416 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-07Frederik Kriewitz <frederik at kriewitz.eu> Segmentation fault fix.oharboe1-0/+3
git-svn-id: svn://svn.berlios.de/openocd/trunk@1025 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-25- rename log functions to stop conflicts under win32 (wingdi)ntfreak1-1/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@523 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-20- added patch "remove error handler as planned"mifi1-1/+1
https://lists.berlios.de/pipermail/openocd-development/2008-January/000665.html (thanks to oyvind Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@260 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-18- added patch for new flash functionality like:mifi1-1/+1
flash verify_image and flash erase_address. - added patch for new parport_write_on_exit command. Even this patch will fix some memory leaks. (thanks too oyvind and Spen for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@240 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-14- reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not ↵drath1-5/+104
functional yet). Configure option changed from --enable-presto to --enable-presto_ftd2xx and --enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-10- renamed M5960 USB JTAG to "flyswatter"drath1-0/+69
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin) - various whitespace fixes - removed various warnings - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann) - fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin) - switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed) - added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include semihosting, all ARM7/9 only for now) - added support for GDB vFlashXXX packets (thanks to Pavel Chromy) - added support for receiving data via ARM7/9 DCC - reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash write_image' (write image files (bin, hex, elf, s19) to a target). - added support for AMD/ST/SST 29F400B non-cfi flashes git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.1 at 2024-09-10 13:50:48 +0000