aboutsummaryrefslogtreecommitdiff
path: root/src/jtag
AgeCommit message (Collapse)AuthorFilesLines
2018-11-05Support for two-wire cJTAG OSCAN1 signaling thru FTDI devices with ↵Greg Savin2-10/+354
appropriate pinout (#320) Added support for cJTAG OSCAN1 over FTDI MPSSE.
2018-10-28drivers/cmsis-dap: speed up sending multiple HID requestsTomas Vanek1-43/+153
The performance of CMSIS-DAP in long data transfers was improved substantially in ef02b69b14d133b061217a91add5a028a77e86bc. But it not as good as some other USB/MCU based adapters. Using HID and therefore interrupt endpoint is slower than USB bulk transfer. CMSIS-DAP adapter implements multiple HID buffer handling and OpenOCD already reads number of buffers from info command. This change adds capability to sumbit more than one HID requests before driver waits for a HID response. This scenario is used for long transfers only. Results show about double speed on USB FS and ~140% speed on USB HS: | w/o this change | with multi HIDrq -----------------------------------------+-----------------+----------------- Open source CMSIS-DAP, USB FS, adapter_khz 1000 dump_image ram32k.bin 0x1fffe000 0x8000 | 23.225 KiB/s | 45.901 KiB/s load_image ram32k.bin 0x1fffe000 | 23.324 KiB/s | 46.552 KiB/s Cypress' Kitprog in CMSIS-DAP mode, USB FS, adapter_khz 1000 (over firmware limit) dump_image ram64k.bin 0x20000000 0x10000 | 15.537 KiB/s | 42.558 KiB/s load_image ram64k.bin 0x20000000 | 15.605 KiB/s | 43.291 KiB/s Atmel's EDBG, USB HS, adapter_khz 10000 (#3945 applied) dump_image ram384k.bin 0x20400000 0x6000 | 248.402 KiB/s | 345.250 KiB/s load_image ram384k.bin 0x20400000 | 256.039 KiB/s | 365.945 KiB/s Change-Id: I9edbe018086176d357c6aaba5d6b657a5e5e1c64 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4080 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-10-16ftdi: demote unhelpful debug messagesSteven Stallion1-2/+2
Some protocols make use of empty scan fields for optional padding, which causes the log to fill with unhelpful messages that a field is empty. The remaining LOG_DEBUG messages in ftdi_execute_scan have been demoted to DEBUG_JTAG_IO such that these messages are only seen when debugging JTAG. Change-Id: I61fd4551411ce851da34e67d003bca5d7a71cd92 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/4112 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2018-10-16jtag: make cmd_queue_scan_field_clone publicSteven Stallion4-17/+17
This patch makes the cmd_queue_scan_field_clone function public. This permits targets to insert fields without affecting the submitted scan_field list. This will be used in an upcoming target implementation that needs to insert additional padding bits. Change-Id: I8fbd3b9b4e413432471f4f1444048932c8fa189e Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/4082 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-10-09drivers: cmsis-dap: fix connection in JTAG modeAntonio Borneo1-3/+1
Commit 5aceec24122bc222896cfcfd91f7f082f630ac83 ("drivers: cmsis-dap: pull up common connect code") breaks the driver and it cannot connect anymore in JTAG mode. The issue is caused in cmsis_dap_init() by anticipating the call to cmsis_dap_usb_open(), which then sets cmsis_dap_handle and makes the following test to always fail. Actually the original code was quite tricky: if (swd_mode) do something that also sets cmsis_dap_handle; if (cmsis_dap_handle == NULL) do something for !swd_mode; Convert the sequence of tricky "if"s in a single "if-then-else" to handle clearly the cases swd_mode and !swd_mode. Change-Id: I359a23bf26a3edc2461f4352daa0be83e78868f7 Fixes: 5aceec24122b ("drivers: cmsis-dap: pull up common connect code") Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4697 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2018-09-17Update mpsse.cmpsse_flushMegan Wachs1-0/+1
Include necessary header file
2018-09-12Add wall clock timeout to mpsse_flush()Tim Newsome1-0/+6
I think that libusb_handle_events_timeout_completed is supposed to make progress or time out, but sometimes we hit a case where it makes no progress, and mpsse_flush() loops forever. This wall clock timeout kicks it out of that loop. OpenOCD appears to die afterwards, but that's still an improvement. Change-Id: Id9220557625834fb5b7dccf65251651a11a887f0
2018-09-10ftdi: extend ftdi_location formatOleksij Rempel1-2/+2
To existing <bus>:<port>,<port> format add <bus>-<port>.<port> support. The last format is used by kernel and other drivers. Change-Id: I6528970d3af4f6a8bf7b27a0f7a763b5957fdf2b Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4631 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-09-07libusb: return oocd error valuesOleksij Rempel1-3/+3
keep same return style where possible Change-Id: I2f9b85dbc307a483609f76a84de77e3c74d346c7 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4588 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-08-29Flatten libjaylink submoduleAndrew Waterman41-0/+11697
2018-08-20From upstream (#286)Tim Newsome12-92/+103
* flash/nor: Add support for TI CC26xx/CC13xx flash Added cc26xx flash driver to support the TI CC26xx and CC13xx microcontrollers. Driver is capable of determining which MCU is connected and configures itself accordingly. Added config files for four specific variants: CC26x0, CC13x0, CC26x2, and CC13x2. Note that the flash loader code is based on the sources used to support flash in Code Composer Studio and Uniflash from TI. Removed cc26xx.cfg file made obsolete by this patch. Change-Id: Ie2b0f74f8af7517a9184704b839677d1c9787862 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4358 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com> * flash/nor/nrf5: remove is_erased setting and autoerase before write Cached flash erase state in sectors[].is_erased is not reliable as running target can change the flash. Autoerase was issued before flash write on condition is_erased != 1 Remove autoerase completely as it is a quite non-standard feature. Change-Id: I19bef459e6afdc4c5fcaa2ccd194cf05be8a42b6 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4400 Tested-by: jenkins * src/flash/tms470: remove testing of sectors[].is_erased state The erase check routine checked sectors only if is_erased != 1 Check sector unconditionally. While on it fix clang static analyzer warnings. Change-Id: I9988615fd8530c55a9b0c54b1900f89b550345e9 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4401 Tested-by: jenkins * tcl/target/stm32f7x: configure faster system clock in reset-init STM32F7xx devices need faster clock for flash programming over JTAG transport. Using reset default 16 MHz clock resulted in lot of DAP WAITs and substantial decrease of flashing performance. Adapted to the restructured dap support (see 2231da8ec4e7d7ae9b652f3dd1a7104f5a110f3f). Change-Id: Ida6915331dd924c9c0d08822fd94c04ad408cdc5 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4464 Tested-by: jenkins Reviewed-by: Christopher Head <chead@zaber.com> * flash/nor/psoc5lp: fix compile issue on GCC 8.1.0 Issue already identified by Alex https://sourceforge.net/u/alexbour/ in ticket #191 https://sourceforge.net/p/openocd/tickets/191/ src/flash/nor/psoc5lp.c:237:2: error: ‘strncpy’ output truncated before terminating nul copying 2 bytes from a string of the same length [-Werror=stringop-truncation] Fix it by assigning the value to the array elements. Change-Id: I22468e5700efa64ea48ae8cdec930c48b4a7d8fb Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4563 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/arm: Add PLD command to ARM disassembler. Updates the ARM disassembler to handle PLD (PreLoad Data) commands. Previously handled by printing a TODO message. There are three forms of the command: literal, register, and immediate. Simply decode based off of the A1 encoding for the instructions in the ARM ARM. Also fixes mask to handle PLDW commands. Change-Id: I63bf97f16af254e838462c7cfac80f6c4681c556 Signed-off-by: James Marshall <jcmarsh@gwmail.gwu.edu> Reviewed-on: http://openocd.zylin.com/4348 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> * mips_m4k.c: Fix build with --disable-target64 Replace PRIx64 with TARGET_PRIxADDR to avoid build problems when --disable-target64 is used during configure. Change-Id: I054a27a491e86c42c9386a0488194320b808ba96 Signed-off-by: Liviu Ionescu <ilg@livius.net> Reviewed-on: http://openocd.zylin.com/4566 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Tim Newsome <tim@sifive.com> * target/arm_adi_v5: sync CSW and TAR cache on apreg write When using apreg to change AP registers CSW or TAR we get internal cached value not valid anymore. Reuse the setup functions for CSW and TAR to write them. Invalidate the cached value before the call to force the write, thus keeping original apreg behaviour. Change-Id: Ib14fafd5e584345de94f2e983de55406c588ac1c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4565 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/arm_adi_v5: keep CSW and TAR cache updated The call to dap_queue_ap_write() can fail and the value in CSW and TAR becomes unknown. Invalidate the OpenOCD cache if dap_queue_ap_write() fails. Change-Id: Id6ec370b4c5ad07e454464780c1a1c8ae34ac870 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4564 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl/target: Add Renesas R-Car R8A7794 E2 target Add configuration for the Renesas R-Car R8A7794 E2 target. This is an SoC with two Cortex A7 ARMv7a cores, both A7 cores are supported. Change-Id: Ic1c81840e3bfcef8ee1de5acedffae5c83612a5e Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/4531 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * tcl/board: Add Renesas R-Car R8A7790 H2 Stout board Add configuration for the Renesas R-Car R8A7790 H2 based Stout ADAS board. Change-Id: Ib880b5d2e1fab5c8c0bc0dbcedcdce8055463fe2 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/4497 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * tcl/board: Add Renesas R-Car R8A7791 M2W Porter board Add configuration for the Renesas R-Car R8A7791 M2W based Porter evaluation board. Change-Id: Iaadb18f29748f890ebb68519ea9ddbd18e7649af Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/4498 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * tcl/board: Add Renesas R-Car R8A7794 E2 Silk board Add configuration for the Renesas R-Car R8A7794 E2 based Silk evaluation board. Change-Id: I504b5630b1a2791ed6967c6c2af8851ceef9723f Signed-off-by: Marek Vasut <marek.vasut@gmail.com> --- NOTE: This requires SW7[1] in position 1 (default is 0) Reviewed-on: http://openocd.zylin.com/4532 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * tcl/board: Factor out common R-Car Gen2 code Factor out the code shared by all R-Car Gen2 boards into a single file to get rid of the duplication. Change-Id: I70b302c2e71f4e6fdccb2817dd65a5493bb393d8 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/4533 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * jtag/drivers/cmsis-dap: fix connect in cmsis_dap_swd_switch_seq() The proc cmsis_dap_swd_switch_seq() is part of the SWD API for this interface driver. It is valid only when the interface is used in SWD mode. In this proc there is the need to call, in sequence, first cmsis_dap_cmd_DAP_Disconnect() then cmsis_dap_cmd_DAP_Connect(). The latter call requires the connection mode as parameter, that inside cmsis_dap_swd_switch_seq() can only be CONNECT_SWD. The current implementation is not correct and in some cases can pass mode CONNECT_JTAG. Moreover, JTAG is optional in CMSIS-DAP and passing mode CONNECT_JTAG triggers an error with SWD-only interfaces. Use mode CONNECT_SWD in SWD specific cmsis_dap_swd_switch_seq(). Change-Id: Ib455bf5b69cb2a2d146a6c8875387b00c27a5690 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4571 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/cortex_m: return error if breakpoint address is out of range If the "Flash Patch and Breakpoint" unit is rev.1 then it can only accept breakpoint addresses below 0x1FFFFFFF. Detailed info in "ARM v7-M Architecture Reference Manual", DDI0403E at chapter "C1.11 Flash Patch and Breakpoint unit". Print a message and return error if the address of hardware breakpoint cannot be handled by the breakpoint unit. Change-Id: I95c92b1f058f0dfc568bf03015f99e439b27c59b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4535 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com> * flash/nor/stm32: Report errors in wait_status_busy Flash operation errors that occur during algorithm programming are reported via the algorithm return value. However, Flash operation errors that occur during non-algorithm work (erasing, programming without a work area, programming the last non-multiple-of-32-bytes on an H7, etc.) generally end with a call to stm32x_wait_status_busy, which reads the status register and clears the error flags but fails to actually report that something went wrong should an error flag (other than WRPERR) be set. Return an error status from stm32x_wait_status_busy in those cases. Correct a log message accordingly. Change-Id: I09369ea5f924fe58833aec1f45e52320ab4aaf43 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4519 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * flash/nor/stm32: Eliminate working area leak On a specific early-return path, an allocated working area was not freed. Free it. Change-Id: I7c8fe51ff475f191624086996be1c77251780b77 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4520 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * flash/nor/stm32h7: Fix incorrect comment The name of the bit according to the reference manual is inconsistency error, not increment error. Change-Id: Ie3b73c0312db586e35519e03fd1a5cb225673d97 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4521 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> * target: fix 'bp' command help message "asid" and "length" are separate arguments of the command. Put space between them. Change-Id: I36cfc1e3a01caafef4fc3b26972a0cc192b0b963 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4511 Tested-by: jenkins Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * Add ARM v8 AArch64 semihosting support This patch implements semihosting support for AArch64. This picks code from previously submitted AArch64 semihosting support patch and rebases on top of reworked semihosting code. Tested in AArch64 mode on a Lemaker Hikey Board with NewLib and GDB. Change-Id: I228a38f1de24f79e49ba99d8514d822a28c2950b Signed-off-by: Omair Javaid <omair.javaid@linaro.org> Reviewed-on: http://openocd.zylin.com/4537 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * GDB fileIO stdout support This patch fixes gdb fileio support to allow gdb console to be used as stdout. Now we can do something like gdb <inferior file> (gdb) tar ext :3333 (gdb) load (gdb) monitor arm semihosting enable (gdb) monitor arm semihosting_fileio enable (gdb) continue Here: Output from inferior using puts, printf etc will be routed to gdb console. Change-Id: I9cb0dddda1de58038c84f5b035c38229828cd744 Signed-off-by: Omair Javaid <omair.javaid@linaro.org> Reviewed-on: http://openocd.zylin.com/4538 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target: armv8: Avoid semihosting segfault on halt Avoid a NULL pointer dereference when halting an aarch64 core. Change-Id: I333d40475ab26e2f0dca5c27302a5fa4d817a12f Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/4593 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * tcl: target: Add NXP LS1012A config As seen on the FRDM-LS1012A board. Change-Id: Ifc9074b3f7535167b9ded5f544501ec2879f5db7 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/4594 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * tcl: board: Add NXP Freedom FRDM-LS1012A config An update for the K20 CMSIS-DAP firmware can be found here: https://community.nxp.com/thread/387080?commentID=840141#comment-840141 Change-Id: I149d7f8610aa56daf1aeb95f14ee1bf88f7cb647 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/4595 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * gdb_server: only trigger once the event gdb-detach at gdb quit When GDB quits (e.g. with "quit" command) we first execute gdb_detach() to reply "OK" then, at GDB disconnect (either TCP or pipe connection type), we execute gdb_connection_closed(). In case GDB is killed or it crashes, OpenOCD only executes the latter when detects the disconnection. Both gdb_detach() and gdb_connection_closed() trigger the event TARGET_EVENT_GDB_DETACH thus getting it triggered twice on clean GDB quit. Do not trigger the event TARGET_EVENT_GDB_DETACH in gdb_detach() and let only gdb_connection_closed() to handle it. Change-Id: Iacf035c855b8b3e2239c1c0e259c279688b418ee Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4585 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * gdb_server: set current_target from connection's one In a multi-target environment we are supposed to have a single gdb server for each target (or for each group of targets within a SMP node). By default, the gdb attached to a server sends its command to the target (or to the SMP node targets) linked to that server. This is working fine for the normal gdb commands, but it is broken for the native OpenOCD commands executed through gdb "monitor" command. In the latter case, gdb "monitor" commands will be executed on the current target of OpenOCD configuration script (that is either the last target created or the target specified in a "targets" command). Fixed in gdb_new_connection() by replacing the current target in the connection's copy of command context. Change-Id: If7c8f2dce4a3138f0907d3000dd0b15e670cfa80 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4586 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com> * target/image: make i/j unsigned to avoid ubsan runtime error src/target/image.c:1055:15: runtime error: left shift of 128 by 24 places cannot be represented in type 'int' Change-Id: I322fd391cf3f242beffc8a274824763c8c5e69a4 Signed-off-by: Cody Schafer <openocd@codyps.com> Reviewed-on: http://openocd.zylin.com/4584 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com> * target/stm32f7x: Clear stuck HSE clock with CSS Change-Id: Ica0025ea465910dd664ab546b66f4f25b271f1f5 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4570 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> * psoc5lp: fix erase check, add free_driver_priv psoc5lp_erase_check() was not properly adapted to the new armv7m_blank_check_memory() in the hot fix 53376dbbede4f0bf42e724ff This change fixes handling of num_sectors in dependecy of ecc_enabled. Also add comments how ecc_enabled influences num_sectors. Add pointer to default_flash_free_driver_priv() to all psoc5lp flash drivers to keep valgrind happy. Change-Id: Ie1806538becd364fe0efb7a414f0fe6a84b2055b Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4569 Tested-by: jenkins * target: atmel samd10 xplained mini cortex m0+ on a tiny board, with an mEDBG (CMSIS-DAP) debug interface. Change-Id: Iaedfab578b4eb4aa2d923bd80f220f59b34e6ef9 Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3402 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl/board: add SAMD11 Xplained Pro evaluation board Change-Id: Id996c4de6dc9f25f71424017bf07689fea7bd3af Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/4507 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * Adds SAMD11D14AU flash support. Corrects names of SAMD11D14AM and SAMD11D14ASS per datasheet. Change-Id: I8beb15d5376966a4f8d7de76bfb2cbda2db440dc Signed-off-by: Christopher Hoover <ch@murgatroid.com> Reviewed-on: http://openocd.zylin.com/4597 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * nds32: Avoid detected JTAG clock AICE2 doesn't support scan for the maximum clock frequency of JTAG chain. It will cause USB command timeout. Change-Id: I41d1e3be387b6ed5a4dd0be663385a5f053fbcf9 Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com> Reviewed-on: http://openocd.zylin.com/4292 Tested-by: jenkins Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * flash/nor/tcl: Distinguish between sectors and blocks in status messages Use the right word in flash protect command status messages based on whether the target bank defines num_prot_blocks. Minor message style tidy-up. Change-Id: I5f40fb5627422536ce737f242fbf80feafe7a1fc Signed-off-by: Dominik Peklo <dom.peklo@gmail.com> Reviewed-on: http://openocd.zylin.com/4573 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Christopher Head <chead@zaber.com> * drivers: cmsis-dap: pull up common connect code Just a minor deduplication Change-Id: Idd256883e5f6d4bd4dcc18462dd5468991f507b3 Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3403 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * drivers: cmsis-dap: Print version info when available No need to wait until after connecting, might help diagnose part information by printing earlier. Change-Id: I51eb0d584be306baa811fbeb1ad6a604773e602c Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3404 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * flash/nor: add support for TI MSP432 devices Added msp432 flash driver to support the TI MSP432P4x and MSP432E4x microcontrollers. Implemented the flash algo helper as used in the TI debug and flash tools. This implemention supports the MSP432E4, Falcon, and Falcon 2M variants. The flash driver automatically detects the connected variant and configures itself appropriately. Added command to mass erase device for consistency with TI tools and added command to unlock the protected BSL region. Tested using MSP432E401Y, MSP432P401R, and MSP432P4111 LaunchPads. Tested with embedded XDS110 debug probe in CMSIS-DAP mode and with external SEGGER J-Link probe. Removed ti_msp432p4xx.cfg file made obsolete by this patch. Change-Id: I3b29d39ccc492524ef2c4a1733f7f9942c2684c0 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4153 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * flash/nor/at91sam4: fix sam4sa16c flash banks and its gpnvms count There was already a github fork that had this fixed, but as we try to use the latest, non-modified version of all software we use, I would like to have this fix in the next releases of OpenOCD so that if people uses $packagemanager, they will not have issues flashing the last part of the flash of sam4sa16c chips. Additionally, I've added some more logging related to the flash bank that was used, and the chip ID that was detected. Change-Id: I7ea5970105906e4560b727e46222ae9a91e41559 Signed-off-by: Erwin Oegema <blablaechthema@hotmail.com> Reviewed-on: http://openocd.zylin.com/4599 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins * flash/nor/stm32lx: Add revision 'V' for STM32L1xx Cat.3 devices Change-Id: Ic92b0fb5b738af3bec79ae335876aa9e26f5f4cd Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/4600 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Avoid null target->semihosting references. The new common semihosting code introduced a bug, in certain conditions target->semihosting was used without semihosting being initialised. The solution was to explicitly test for target->semihosting before dereferencing it. Change-Id: I4c83e596140c68fe4ab32e586e51f7e981a40798 Signed-off-by: Liviu Ionescu <ilg@livius.net> Reviewed-on: http://openocd.zylin.com/4603 Tested-by: jenkins Reviewed-by: Jonathan Larmour <jifl@eCosCentric.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * nrf5: Add HWID 0x139 (52832 rev E0) Change-Id: I71b7471ccfcb8fcc6de30da57ce4165c7fb1f73f Signed-off-by: James Jacobsson <slowcoder@gmail.com> Reviewed-on: http://openocd.zylin.com/4604 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target: Fix segfault for 'mem2array' Call 'mem2array' without arguments to reproduce the segmentation fault. Change-Id: I02bf46cc8bd317abbb721a8c75d7cbfac99eb34e Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/4534 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Christopher Head <chead@zaber.com> * target/armv7m_trace: Fix typo in enum Change-Id: I6364ee5011ef2d55c59674e3b97504a285de0cb2 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3904 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * target/armv7m_trace: Use prefix for enums Change-Id: I3f199e6053146a1094d96b98ea174b41bb021599 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3905 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * target/aarch64: Call aarch64_init_debug_access() earlier in aarch64_deassert_reset() On Renesas R-Car, calling 'reset halt' and 'reset init' always made DAP inaccessible. Calling 'reset' and 'halt' seperatly worked fine. The only differences seems to be the point in time when aarch64_init_debug_access() is called. This patch aligns the behaviour. Change-Id: I2296c65e48414a7d9846f12a395e5eca315b49ca Signed-off-by: Dennis Ostermann <dennis.ostermann@renesas.com> Reviewed-on: http://openocd.zylin.com/4607 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * server: Improve signal handling under Linux Commit 5087a955 added custom signal handlers for the openocd server process. Before this commit, when openocd is run as a background process having the same controlling terminal as gdb, Control-C would be handled by gdb to stop target execution and return to the gdb prompt. However, after commit 5087a955, the SIGINT caused by pressing Control-C also terminates openocd, effectively crashing the debugging session. The only way to avoid this is run openocd in a different controling terminal or to detach openocd from its controlling terminal, thus losing all job control for the openocd process. This patch improves the server's handling of POSIX signals: 1) Keyboard generated signals (INT and QUIT) are ignored when server process has is no controlling terminal. 2) SIGHUP and SIGPIPE are handled to ensure that .quit functions for each interface are called if user's logs out of X session or there is a network failure. SIG_INT & SIG_QUIT still stop openocd when it is running in the foreground. Change-Id: I03ad645e62408fdaf4edc49a3550b89b287eda10 Signed-off-by: Brent Roman <genosensor@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3963 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * armv7a: read ttbcr and ttb0/1 at every entry in debug state Commit bfc5c764df145f68835543119865eabe462e19c2 avoids reading ttbcr and ttb0/1 at every virt2phys translation by caching them, and it updates the cached values in armv7a_arch_state(). But the purpose of any (*arch_state)() method, thus including armv7a_arch_state(), is to only print out and inform the user about some architecture specific status. Moreover, to reduce the verbosity during a GDB session, the method (*arch_state)() is not executed anymore at debug state entry (check use of target->verbose_halt_msg in src/openocd.c), thus the state of translation table gets out-of-sync triggering Error: Address translation failure or even using a wrong address in the memory R/W operation. In addition, the commit above breaks the case of armv7r by calling armv7a_read_ttbcr() unconditionally. Fixed by moving in cortex_a_post_debug_entry() the call to armv7a_read_ttbcr() on armv7a case only. Remove the call to armv7a_read_ttbcr() in armv7a_identify_cache() since it is (conditionally) called only in the same procedure cortex_a_post_debug_entry(). Fixes: bfc5c764df14 ("armv7a: cache ttbcr and ttb0/1 on debug state entry") Change-Id: Ifc20eca190111832e339a01b7f85d28c1547c8ba Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4601 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * Avoid dereferencing NULL pointer. If a NULL pointer is passed, don't attempt to increment it. This avoids passing the now not-NULL pointer on and eventually segfaulting. Also remove some unnecessary temporary variables. Change-Id: I268e225121aa283d59179bfae407ebf6959d3a4e Signed-off-by: Darius Rad <darius@bluespec.com> Reviewed-on: http://openocd.zylin.com/4550 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> * Remove FSF mailing address. Checkpatch complains about this (FSF_MAILING_ADDRESS). Change-Id: Ib46a7704f9aed4ed16ce7733d43c58254a094149 Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/4559 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> * drivers: cmsis_dap_usb: implement cmd JTAG_TMS Simply add a wrapper around cmsis_dap_cmd_DAP_SWJ_Sequence() Change-Id: Icf86f84b24e9fec56e2f9e155396aac34b0e06d2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4517 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> * arm_adi_v5: put SWJ-DP back to JTAG mode at exit When SWD mode is used, current OpenOCD code left the SWJ-DP in SWD mode at exit. Also, current code is unable to switch back the SWJ-DP in JTAG at next run, thus a power cycle of both target and interface is required in order to run OpenOCD in JTAG mode again. Put the SWJ-DP back to JTAG mode before exit from OpenOCD. Use switch_seq(SWD_TO_JTAG) instead of dap_to_jtag(), because the latter is not implemented on some interfaces. This is aligned with the use of switch_seq(JTAG_TO_SWD) in swd_connect(). Change-Id: I55d3faebe60d6402037ec39dd9700dc5f17c53b0 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4493 Tested-by: jenkins Reviewed-by: Bohdan Tymkiv <bhdt@cypress.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * Add RISC-V support. This supports both 0.11 and 0.13 versions of the debug spec. Support for `-rtos riscv` will come in a separate commit since it was easy to separate out, and is likely to be more controversial. Flash support for the SiFive boards will also come in a later commit. Change-Id: I1d38fe669c2041b4e21a5c54a091594aac3e2190 Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/4578 Tested-by: jenkins Reviewed-by: Liviu Ionescu <ilg@livius.net> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * usb_blaster: Don't unnecessarily go through DR-/IR-Pause There is no need to pass through DR-/IR-Pause after a scan if we want to go to DR-/IR-Update. We just have to skip the first step of the path to the end state because we already did that step when shifting the last bit. v2: - Fix comments as remarked in review of v1 Change-Id: I3c10f02794b2233f63d2150934e2768430873caa Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Reviewed-on: http://openocd.zylin.com/4245 Tested-by: jenkins Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * cortex_a: fix virt2phys when mmu is disabled When the MMU is not enabled on debug state entry, virt2phys cannot perform a translation since it is unknown whether a valid MMU configuration existed before. In this case, return the virtual address as physical address. Change-Id: I6f85a7a5dbc200be1a4b5badf10a1a717f1c79c0 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4480 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * drivers: cmsis-dap: print serial if available Helpful for sanity checking connections Change-Id: Ife0d8b4e12d4c03685aac8115c9739a4c1e994fe Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3405 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/cortex_m: make a variable local The vec_ids variable is not referenced anywhere other than the vector catch command handler. Make it local to that function. Change-Id: Ie5865e8f78698c19a09f0b9d58269ced1c9db440 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4606 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/cortex_a: fix compile error for uninitialized variable Commit ad6c71e151590f9d07eb07eda978a8d2a845259c introduced the variable "mmu_enabled" whose pointer is passed to cortex_a_mmu() that initialises it. This initialization is not visible to the compiler that issue a compile error. The same situation is common across the same file and the usual workaround is to initialize it to zero; thus the same fix i applied here. Ticket: https://sourceforge.net/p/openocd/tickets/197/ Fixes: commit ad6c71e15159 ("cortex_a: fix virt2phys when mmu is disabled") Change-Id: I77dec41acdf4c715b45ae37b72e36719d96d9283 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4619 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * mips_m4k: add optional reset handler In some cases by using SRST we can't halt CPU early enough. And option PrRst is not available too. In this case the only way is to set BOOT flag over EJTAG and reset CPU or SoC from CPU itself. For example by writing to some reset register. This patch is providing possibility to use user defined reset-assert handler which will be enabled only in case SRST is disabled. It is needed to be able switch between two different reset variants on run time. Change-Id: I6ef98f1871ea657115877190f7cc7a5e8f3233e4 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4404 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * tcl/target: add config for Qualcomm QCA4531 The QCA4531 is a two stream (2x2) 802.11b/g/n single-band programmable Wi-Fi System-on-Chip (SoC) for the Internet of Things (IoT). https://www.qualcomm.com/products/qca4531 Change-Id: I58398c00943b005cfaf0ac1eaad92d1fa4e2cba7 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4405 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * tcl/board: add config for 8devices LIMA board More information about this board can be found here: https://www.8devices.com/products/lima Change-Id: Id35a35d3e986630d58d37b47828870afd107cc6a Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4406 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * tcl/target|board: move common AR9331 code to atheros_ar9331.cfg The ar9331_25mhz_pll_init and ar9331_ddr1_init routines can be used not only for TP-Link MR3020 board, so move them to the common atheros_ar9331.cfg file. Change-Id: I04090856b08151d6bb0f5ef9cc654efae1c81835 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2999 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * tcl/target/atheros_ar9331: add DDR2 helper this helper works on many different boards, so it is good to have it in target config Change-Id: I068deac36fdd73dbbcedffc87865cc5b9d992c1d Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4422 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * tcl/target/atheros_ar9331: add documentation and extra helpers Sync it with experience gathered on Qualcomm QCA4531 SoC. This chips are in many ways similar. Change-Id: I06b9c85e5985a09a9be3cb6cc0ce3b37695d2e54 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4423 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * tcl/board: add DPTechnics DPT-Board-v1 it is Atheros AR9331 based IoT dev board. Change-Id: I6fc3cdea1bef49c53045018ff5acfec4d5610ba6 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4424 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * fpga/altera-10m50: add all device id add all currently know Intel (Alter) MAX 10 device ids Change-Id: I6a88fef222c8e206812499d41be863c3d89fa944 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4598 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * target|board: Add Intel (Altera) Arria 10 target and related board Target information about this SoC can be found here: https://www.altera.com/products/fpga/arria-series/arria-10/overview.html Achilles Instant-Development Kit Arria 10 SoC SoM: https://www.reflexces.com/products-solutions/development-kits/arria-10/achilles-instant-development-kit-arria-10-soc-som Change-Id: Id78c741be6a8b7d3a70f37d41088e47ee61b437a Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4583 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * target/riscv: fix compile error with gcc 8.1.1 Fix compile error: src/target/riscv/riscv-011.c: In function ‘slot_offset’: src/target/riscv/riscv-011.c:238:4: error: this statement may fall through [-Werror=implicit-fallthrough=] switch (slot) { ^~~~~~ src/target/riscv/riscv-011.c:243:3: note: here case 64: ^~~~ Fixes: a51ab8ddf63a ("Add RISC-V support.") Change-Id: I7fa86b305bd90cc590fd4359c3698632d44712e5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4618 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tim Newsome <tim@sifive.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com> * server: explicitly call "shutdown" when catch CTRL-C or a signal Every TCL command can be renamed (or deleted) and then replaced by a TCL proc that has the same name of the original TCL command. This can be used either to completely replace an existing command or to wrap the original command to extend its functionality. This applies also to the OpenOCD command "shutdown" and can be useful, for example, to set back some default value to the target before quitting OpenOCD. E.g. (TCL code): rename shutdown original_shutdown proc shutdown {} { puts "This is my implementation of shutdown" # my own stuff before exit OpenOCD original_shutdown } Unfortunately, sending a signal (or pressing CTRL-C) to terminate OpenOCD doesn't trigger calling the original "shutdown" command nor its (eventual) replacement. Detect if the main loop is terminated by an external signal and in such case execute explicitly the command "shutdown". Replace with enum the magic numbers assumed by "shutdown_openocd". Please notice that it's possible to write a custom "shutdown" TCL proc that does not call the original "shutdown" command. This is useful, for example, to prevent the user to quit OpenOCD by typing "shutdown" in the telnet session. Such case will not prevent OpenOCD to terminate when receiving a signal; OpenOCD will quit after executing the custom "shutdown" command. Change-Id: I86b8f9eab8dbd7a28dad58b8cafd97caa7a82f43 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4551 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * zy1000: fix compile error with gcc 8.1.1 The fall-through comment is not taken in consideration by gcc 8.1.1 because it is inside the braces of a C-code block. Move the comment outside the C block. Change-Id: I22d87b2dee109fb8bcf2071ac55fdf7171ffcf4b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4614 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * flash/nor/tcl.c: fix flash bank bounds check in 'flash fill' command handler Steps to reproduce ( STM32F103 'Blue Pill', 128KiB of flash ): > flash fillh 0x0801FFFE 00 1 wrote 2 bytes to 0x0801fffe in 0.019088s (0.102 KiB/s) > flash fillw 0x0801FFFE 00 1 Error: stm32f1x.cpu -- clearing lockup after double fault Error: error waiting for target flash write algorithm Error: error writing to flash at address 0x08000000 at offset 0x0001fffe Change-Id: I145092ec5e45bc586b3df48bf37c38c9226915c1 Signed-off-by: Bohdan Tymkiv <bhdt@cypress.com> Reviewed-on: http://openocd.zylin.com/4516 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/arm_adi_v5: add command "dpreg" For very low level debug or development around DAP, it is useful to have direct access to DP registers. Add command "dpreg" by mimic the syntax of the existing "apreg" command: $dap_name dpreg reg [value] Change-Id: Ic4ab451eb5e74453133adee61050b4c6f656ffa3 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4612 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * nrf5: add free_driver_priv Change-Id: I429a9868deb0c4b51f47a4bbad844bdc348e8d21 Signed-off-by: Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/4608 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * rtos: add support for NuttX This patch introduces RTOS support for NuttX. Currently, only ARM Cortex-M (both FPU and FPU-less) targets are supported. To use, add the following lines to ~/.gdbinit. define hookpost-file eval "monitor nuttx.pid_offset %d", &((struct tcb_s *)(0))->pid eval "monitor nuttx.xcpreg_offset %d", &((struct tcb_s *)(0))->xcp.regs eval "monitor nuttx.state_offset %d", &((struct tcb_s *)(0))->task_state eval "monitor nuttx.name_offset %d", &((struct tcb_s *)(0))->name eval "monitor nuttx.name_size %d", sizeof(((struct tcb_s *)(0))->name) end And please make sure the above values are the same as in src/rtos/nuttx_header.h Change-Id: I2aaf8644d24dfb84b500516a9685382d5d8fe48f Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Signed-off-by: Masatoshi Tateishi <Masatoshi.Tateishi@jp.sony.com> Signed-off-by: Nobuto Kobayashi <Nobuto.Kobayashi@sony.com> Reviewed-on: http://openocd.zylin.com/4103 Tested-by: jenkins Reviewed-by: Alan Carvalho de Assis <acassis@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * server/server: Add ability to remove services Add the ability to remove services while OpenOCD is running. Change-Id: I4067916fda6d03485463fa40901b40484d94e24e Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/4054 Tested-by: jenkins Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/cortex_m: fix incorrect comment The code sets C_MASKINTS if that bit is not already set (correctly). Fix the comment to agree. Change-Id: If4543e2660a9fa2cdabb2d2698427a6c8d9a274c Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4620 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl/target/stm32f0x: Allow overriding the Flash bank size Copy & paste from another stm32 target. Change-Id: I0f6cbcec974ce70c23c1850526354106caee1172 Signed-off-by: Dominik Peklo <dom.peklo@gmail.com> Reviewed-on: http://openocd.zylin.com/4575 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * tcl/target: add Allwinner V3s SoC support Change-Id: I2459d2b137050985b7301047f9651951d72d9e9e Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4427 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> * target/arm_adi_v5: allow commands apsel and apcsw during init phase The current implementation of apsel cannot be executed during the initialization phase because it queries the DAP AP to retrieve and print the content of IDR register, and the query is only possible later on during the exec phase. But IDR information is already printed by the dedicated command apid, making redundant printing it by apsel too. Being unable to run apsel during initialization, makes also apcsw command (that depends on apsel) not usable in such phase. Modify the command apsel to only set the current AP, without making any transfer to the (possibly not initialized yet) DAP. When run without parameters, just print the current AP number. Change mode to COMMAND_ANY to apsel and to apcsw. Change-Id: Ibea6d531e435d1d49d782de1ed8ee6846e91bfdf Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4624 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/cortex_a: allow command dacrfixup during init phase There is no reason to restrict the command "cortex_a dacrfixup" to the EXEC phase only. Change the command mode to ANY so the command can be used in the initialization phase too. Change-Id: I498cc6b2dbdc48b3b2dd5f0445519a51857b295f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4623 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * target/armv7a_cache: add gdb keep-alive and fix a missing dpm finish Depending on range size, the loop on cache operations can take quite some time, causing gdb to timeout. Add keep-alive to prevent gdb to timeout. Add also a missing dpm->finish() to balance dpm->prepare(). Change-Id: Ia87934b1ec19a0332bb50e3010b582381e5f3685 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4627 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> * Add detail to `wrong register size` error. Signed-off-by: Tim Newsome <tim@sifive.com> Change-Id: Id31499c94b539969970251145e42c89c943fd87c Reviewed-on: http://openocd.zylin.com/4577 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * doc: fix typo in cortex_m maskisr command Change-Id: I37795c320ff7cbf6f2c7434e03b26dbaf6fc6db4 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4621 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/cortex_m: restore C_MASKINTS after reset The cortex_m maskisr user-facing setting is not changed across a target reset. However, the in-core C_MASKINTS bit was always cleared as part of reset processing, meaning that a cortex_m maskisr on setting would not be respected after a reset. Set C_MASKINTS based on the user-facing setting value rather than always clearing it after reset. Change-Id: I5aa5b9dfde04a0fb9c6816fa55b5ef1faf39f8de Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/4605 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * tcl/board: update all uses of interface/stlink-v2-1 to interface/stlink Change-Id: I5e27e84d022f73101376e8b4a1bdc65f58fd348a Signed-off-by: Cody P Schafer <openocd@codyps.com> Reviewed-on: http://openocd.zylin.com/4456 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> * target/riscv/riscv-011: fix compile warning about uninitialized variable In MSYS2 MinGW 64-bit git clone git://git.code.sf.net/p/openocd/code openocd $ gcc --version gcc.exe (Rev1, Built by MSYS2 project) 8.2.0 ./bootstrap ./configure --prefix= $ cat config.status | grep CFLAGS CFLAGS='-g -O2' make bindir = "bin-x64" depbase=`echo src/target/riscv/riscv-011.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ /bin/sh ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -D__USE_MINGW_ANSI_STDIO -I./src -I./src -I./src/helper -DPKGDATADIR=\"/mingw64/share/openocd\" -DBINDIR=\"bin-x64\" -I./jimtcl -I./jimtcl -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -g -O2 -MT src/target/riscv/riscv-011.lo -MD -MP -MF $depbase.Tpo -c -o src/target/riscv/riscv-011.lo src/target/riscv/riscv-011.c &&\ mv -f $depbase.Tpo $depbase.Plo libtool: compile: gcc -DHAVE_CONFIG_H -I. -D__USE_MINGW_ANSI_STDIO -I./src -I./src -I./src/helper -DPKGDATADIR=\"/mingw64/share/openocd\" -DBINDIR=\"bin-x64\" -I./jimtcl -I./jimtcl -Wall -Wstrict-prototypes -Wformat-security -Wshadow -Wextra -Wno-unused-parameter -Wbad-function-cast -Wcast-align -Wredundant-decls -Werror -g -O2 -MT src/target/riscv/riscv-011.lo -MD -MP -MF src/target/riscv/.deps/riscv-011.Tpo -c src/target/riscv/riscv-011.c -o src/target/riscv/riscv-011.o src/target/riscv/riscv-011.c: In function 'poll_target': src/target/riscv/riscv-011.c:1799:6: error: 'reg' may be used uninitialized in this function [-Werror=maybe-uninitialized] reg_cache_set(target, reg, ((data & 0xffffffff) << 32) | value); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/target/riscv/riscv-011.c:1686:17: note: 'reg' was declared here unsigned int reg; ^~~ cc1.exe: all warnings being treated as errors make[2]: *** [Makefile:3250: src/target/riscv/riscv-011.lo] Error 1 Change-Id: I6996dcb866fbace26817636f4bedba09510a087f Signed-off-by: Svetoslav Enchev <svetoslav.enchev@gmail.com> Reviewed-on: http://openocd.zylin.com/4635 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tim Newsome <tim@sifive.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-08-01zy1000: fix compile error with gcc 8.1.1Antonio Borneo1-1/+1
The fall-through comment is not taken in consideration by gcc 8.1.1 because it is inside the braces of a C-code block. Move the comment outside the C block. Change-Id: I22d87b2dee109fb8bcf2071ac55fdf7171ffcf4b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4614 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-25drivers: cmsis-dap: print serial if availableKarl Palsson1-0/+18
Helpful for sanity checking connections Change-Id: Ife0d8b4e12d4c03685aac8115c9739a4c1e994fe Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3405 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-24usb_blaster: Don't unnecessarily go through DR-/IR-PauseDaniel Glöckner1-22/+19
There is no need to pass through DR-/IR-Pause after a scan if we want to go to DR-/IR-Update. We just have to skip the first step of the path to the end state because we already did that step when shifting the last bit. v2: - Fix comments as remarked in review of v1 Change-Id: I3c10f02794b2233f63d2150934e2768430873caa Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Reviewed-on: http://openocd.zylin.com/4245 Tested-by: jenkins Reviewed-by: Christopher Head <chead@zaber.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-07-23drivers: cmsis_dap_usb: implement cmd JTAG_TMSAntonio Borneo1-0/+9
Simply add a wrapper around cmsis_dap_cmd_DAP_SWJ_Sequence() Change-Id: Icf86f84b24e9fec56e2f9e155396aac34b0e06d2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4517 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-07-23Avoid dereferencing NULL pointer.Darius Rad1-8/+5
If a NULL pointer is passed, don't attempt to increment it. This avoids passing the now not-NULL pointer on and eventually segfaulting. Also remove some unnecessary temporary variables. Change-Id: I268e225121aa283d59179bfae407ebf6959d3a4e Signed-off-by: Darius Rad <darius@bluespec.com> Reviewed-on: http://openocd.zylin.com/4550 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2018-07-19target/armv7m_trace: Use prefix for enumsMarc Schink2-2/+3
Change-Id: I3f199e6053146a1094d96b98ea174b41bb021599 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3905 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-07-19target/armv7m_trace: Fix typo in enumMarc Schink6-7/+7
Change-Id: I6364ee5011ef2d55c59674e3b97504a285de0cb2 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3904 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-07-18drivers: cmsis-dap: Print version info when availableKarl Palsson1-4/+4
No need to wait until after connecting, might help diagnose part information by printing earlier. Change-Id: I51eb0d584be306baa811fbeb1ad6a604773e602c Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3404 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-18drivers: cmsis-dap: pull up common connect codeKarl Palsson1-21/+8
Just a minor deduplication Change-Id: Idd256883e5f6d4bd4dcc18462dd5468991f507b3 Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3403 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-18nds32: Avoid detected JTAG clockHellosun Wu2-25/+28
AICE2 doesn't support scan for the maximum clock frequency of JTAG chain. It will cause USB command timeout. Change-Id: I41d1e3be387b6ed5a4dd0be663385a5f053fbcf9 Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com> Reviewed-on: http://openocd.zylin.com/4292 Tested-by: jenkins Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-03jtag/drivers/cmsis-dap: fix connect in cmsis_dap_swd_switch_seq()Antonio Borneo1-2/+1
The proc cmsis_dap_swd_switch_seq() is part of the SWD API for this interface driver. It is valid only when the interface is used in SWD mode. In this proc there is the need to call, in sequence, first cmsis_dap_cmd_DAP_Disconnect() then cmsis_dap_cmd_DAP_Connect(). The latter call requires the connection mode as parameter, that inside cmsis_dap_swd_switch_seq() can only be CONNECT_SWD. The current implementation is not correct and in some cases can pass mode CONNECT_JTAG. Moreover, JTAG is optional in CMSIS-DAP and passing mode CONNECT_JTAG triggers an error with SWD-only interfaces. Use mode CONNECT_SWD in SWD specific cmsis_dap_swd_switch_seq(). Change-Id: Ib455bf5b69cb2a2d146a6c8875387b00c27a5690 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4571 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-06-12Revert 7927e90a42c4990fbb787b72fa2f049d49f1fdb2Tim Newsome1-1/+1
We don't use VPI anymore, and aren't certain that this must be upstreamed. Change-Id: I055bd565f71df3538dd7e186b0fd0a035dd9e988
2018-06-11Merge branch 'master' into from_upstreamTim Newsome4-5/+1986
2018-06-06drivers: xds110: Remove unnecessary and deprecated libusb function.Edward Fewell1-6/+2
libusb-1.0.22 has deprecated the libusb_set_debug function. This function was present in the XDS110 driver as an artifact left over from early debugging. It isn't required because logging is disabled by default. Removing it to simplify the code and no longer need to have libusb version specific #if's in the code. Change-Id: I9c3f16c039da3f3fad9c4a1169978b0d85a1b45c Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4553 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2018-06-05Fix libusb-1.0.22 deprecated libusb_set_debug with libusb_set_optionKhem Raj1-1/+4
libusb_set_debug is deprecated in libusb >= 1.0.22 therefore replace with equivalent libusb_set_option() API Change-Id: Ic0287a1bc0ccc90afe8e4c688085f0b25a7fb004 Signed-off-by: Khem Raj <raj.khem@gmail.com> Reviewed-on: http://openocd.zylin.com/4540 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-05-31jtag: drivers: sysfsgpio: lift upper gpio number limitPaul Fertser1-4/+4
Recent Linux maps GPIOs from 1023 downwards so do not limit the number to 1000. This should fix #183. Change-Id: I6d4f493b670be9ed9b82759f0fb686a9faddbbf5 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/4502 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-05-31jtag/drivers: Add support for TI XDS110 debug probeEdward Fewell3-1/+1983
Add support for the XDS110 debug probe using the APIs in the probe's firmware. Includes support for older versions of the firmware (with reduced performance) and support for a newer version that includes OpenOCD specific APIs. Tested on various TI LauchPads including MSP432P4, MSP432E4, CC2650, CC2652, and CC3220SF. Updated to add better support for swd switch. Removed issues found with clang static analysis. Updated to add rules entry for the XDS110 probe and Tiva DFU mode (which affects both XDS110 and ICDI probes). Change-Id: Ib274143111a68e67e80003797c6a68e3e80976b2 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4322 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-05-30Merge branch 'master' into from_upstreamTim Newsome1-3/+1
2018-05-30Fix warnings exposed by GCC8Paul Fertser1-3/+1
gcc (GCC) 8.1.0 generates new warnings and thus fails the build. The ARM disassembler warnings actually exposed a bug in SMALW, SMULW and SMUL instructions decoding. Reported by Eimers on IRC. Change-Id: I200c70f75a9e07a1f13a592addc1c5fb37714440 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/4526 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-05-08jtag: adapter: fix indentation in handle_interface_commandAntonio Borneo1-8/+8
Minor fix, no code change, just align it to the block it belongs to. Change-Id: I4c3b0d0bd00a55d5109d3723e5c4bfb2fc72e366 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4492 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-05-08armv8: valgrind memleak fixesMatthias Welwarsky1-2/+0
Various fixes for memory leaks, adds a target cleanup for aarch64 and ARM CTI objects. Change-Id: I2267f0894df655fdf73d70c11ed03df0b8f8d07d Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4478 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-04-17jtag: adapter: fix indentation in handle_interface_commandAntonio Borneo1-8/+8
Minor fix, no code change, just align it to the block it belongs to. Change-Id: I4c3b0d0bd00a55d5109d3723e5c4bfb2fc72e366 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/4492 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-04-10armv8: valgrind memleak fixesMatthias Welwarsky1-2/+0
Various fixes for memory leaks, adds a target cleanup for aarch64 and ARM CTI objects. Change-Id: I2267f0894df655fdf73d70c11ed03df0b8f8d07d Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4478 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-04-09Merge branch 'master' into from_upstreamTim Newsome18-78/+1297
Conflicts: src/rtos/rtos.c src/rtos/rtos.h src/server/gdb_server.c Change-Id: Icd5a8165fe111f699542530c9cb034faf30e09b2
2018-04-04drivers/kitprog: workaround KitProg firmware bug of missing ZLPTomas Vanek1-3/+13
KitProg firmware does not send a zero length packet at the end of the bulk-in transmission of a length divisible by a bulk packet size. This is inconsistent with the USB specification and results in jtag_libusb_bulk_read() waits forever when a transmission of specific size is received. Limit bulk read size to expected number of bytes for problematic tranfer sizes. Use 1 second timeout as the last resort. Change-Id: Ice80306424afd76e9fbc6851911ffd5109c84501 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4426 Tested-by: jenkins Reviewed-by: Bohdan Tymkiv <bhdt@cypress.com>
2018-03-30jtag/core, target: unregister JTAG eventsTomas Vanek1-0/+8
Also call adapter_exit() before command_exit() as the latter releases Jim interpreter so JTAG events should be released before. Fixes memory leak reported by valgrind Change-Id: I493f3fcba34ea2b4234148e79a4e329c866e0f05 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4474 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30target: restructure dap supportMatthias Welwarsky2-3/+2
- add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-20transport: add transport_is_hla()Tomas Vanek4-4/+9
and move declaration of all transport_is_xxx() functions to transport.h Change-Id: Ib229115b5017507b49655bc43b517ab6fb32f7a6 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4469 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-15drivers/ftdi: free allocated memoryTomas Vanek2-1/+19
Also uses calloc() for mpsse_ctx->write_buffer to prevent a false positive valgrind report "Syscall param ioctl(USBDEVFS_SUBMITURB).buffer points to uninitialised bytes(s)" Change-Id: I91963371d15c21ea0fee4c40c1da86174db44520 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4418 Tested-by: jenkins
2018-03-15src/jtag/hla: free allocated memory in hl_interface_quit()Tomas Vanek1-0/+5
Change-Id: If6ead00e47021c88e4c106b4aeaf038db87ff50b Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4413 Tested-by: jenkins
2018-03-15jtag/core: free all taps and daps in adapter_quit()Tomas Vanek1-6/+13
Change-Id: I74496f6ddfb0a72b2933e8d682a73a694b8d107b Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4411 Tested-by: jenkins
2018-03-13jtag: drivers: add support for FT232R sync bitbang JTAG interfacesMatej Kogovsek3-0/+678
Change-Id: Ib88a9e270f5c2a50902a137bcc97fdefd5aad1c6 Signed-off-by: Matej Kogovsek <matej@hamradio.si> Reviewed-on: http://openocd.zylin.com/4215 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-03-12jtag: drivers: buspirate: fix abuse of "char" typePaul Fertser1-32/+32
Change occurrences of char to uint8_t where appropriate as a binary protocol is used to talk to this adapter. This fixes a build issue with modern clang. Change-Id: I21cc82c8cad148bd0977533c12c74a9d6ba2faff Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/4462 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-12Add SWD protocol support to buspirate (2nd try)Mateusz Manowiecki1-27/+436
This is a second try for this patch. I removed the queues from the previous version. I made it compatible with SRST reset and added support for those features that could be supported in raw binary mode. Change-Id: I96fc06abbea9873e98b414f34afd9043fd9c2a41 Signed-off-by: Mateusz Manowiecki <segmentation@fault.pl> Reviewed-on: http://openocd.zylin.com/3960 Tested-by: jenkins Reviewed-by: Eric Work <work.eric@gmail.com> Reviewed-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Reviewed-by: Jacob Alexander <haata@kiibohd.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-03-12nds32: Add jtag scan_chain commandHellosun Wu3-0/+85
Create new command to refresh idcode list during runtime and update Tap idcode. Change-Id: Ie889a39a6f57cea207b2b9c9e42c51c97cfe4d8e Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com> Reviewed-on: http://openocd.zylin.com/4133 Tested-by: jenkins Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-by: penny chen <penny6610231@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-03-12jtag: hla: tcl: fix inconsistent expected_id handlingPaul Fertser1-10/+5
Copy from 20fcd0729e7187e8fe6a38ce53b0a1b95ea647fb. Should fix http://build.openocd.org/job/openocd-clang/doclinks/1/report-1e9b08.html Change-Id: I1a83387b4d745134acc38eeba08aa869d9895573 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/4333 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-03-07Remove debug code.Tim Newsome1-64/+2
I tried to upstream this, but it's turning out to be too painful to be worth the effort. (See http://openocd.zylin.com/#/c/4451/) Change-Id: Ie5c9d8ea84a4c8ab55ce1a6ba7df260d3963291d
2018-02-03jtag: drivers: stlink: ignore write verify errorPaul Fertser1-2/+2
This looks like some inappropriate stlink (mis-)feature and it messes operations for writing to certain memory-mapped registers. Discussed at https://forum.sparkfun.com/viewtopic.php?f=18&t=44949 . Also known to be problematic for working with Kinetis parts. Reported by robertfoss_ on IRC. Change-Id: I8633aed13346c596000ba6c377758e1bb96db73f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/4368 Tested-by: jenkins Reviewed-by: Robert Foss <robert.foss@memcpy.io> Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2018-02-02Merge branch 'master' into updateTim Newsome16-232/+703
Change-Id: I2cd34ed5bb1903736ae8ce109acebaf13bf49805
generated by cgit v1.1 at 2024-08-05 00:17:01 +0000