aboutsummaryrefslogtreecommitdiff
path: root/src/helper
AgeCommit message (Collapse)AuthorFilesLines
2007-06-14- added manpage for OpenOCD (thanks to Uwe Hermann)drath1-0/+42
- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry - added support for auto image type detection (thanks to Vincent Palatin) - further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental) git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-31- add support for ELF images (thanks to Vincent Palatin for this patch)drath1-0/+12
git-svn-id: svn://svn.berlios.de/openocd/trunk@161 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-29- split fileio handling into fileio part and image handlingdrath2-314/+17
- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported) - added XScale debug handler binary to repository - added Thumb disassembling (thanks to Vincent Palatin for this patch) - added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported) This checkin is experimental, not suitable for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-05- further work on ETB decoding (not yet functional)drath1-1/+6
- fixed several uses of uninitialized bits (Thanks to Vincent Palatin for finding and fixing these bugs) git-svn-id: svn://svn.berlios.de/openocd/trunk@145 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-25- added support for error handlers to JTAG scan commands ↵drath1-0/+4
(jtag_[plain_][ir|dr]_scan) - catch apparently broken JTAG IR scan after ARM926EJ-S CP15 operations - added "arm7_9 dump_etb" command git-svn-id: svn://svn.berlios.de/openocd/trunk@142 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-12- correctly mask out bits that aren't part of a copied bufferdrath1-0/+6
- fixed arm926ej-s CP15 register access handling - correctly identify SYSCLK source in LPC3180 NAND flash controller driver git-svn-id: svn://svn.berlios.de/openocd/trunk@139 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-28- merged XScale branch back into trunkdrath1-10/+11
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c - free working area and register stuff if str7x block write algorithm failed - check PC after exiting a target algorithm in armv4_5.c git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-26- fixed arm926 cp15 command bug (thanks to Vincent Palatin for this patch)drath4-4/+7
- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch) - added support for accessing ETB (embedded trace buffer) registers git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-16- added missing files for last commitdrath2-0/+670
git-svn-id: svn://svn.berlios.de/openocd/trunk@133 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-15- reworked file i/o. every fileaccess (target, flash, nand, in future ↵drath4-4/+42
configuration, too) should now go through the fileio subsystem - added support for reading IHEX files (through fileio) - load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex'] - added NAND framework (preliminary) - added support for the LPC3180 SLC and MLC NAND controllers (preliminary) - fix initialization for parport - gw16012 fixes/cleanups - added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far) - added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-22- fix incorrect parsing of whitespace in command.c (thanks to Magnus Lundin)drath1-6/+19
- fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin) - fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this) - add support for reading JTAG device id (currently only as debug output on startup) - cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number. - small cleanups/fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-22- added a PLD (programmable logic device) subsystem for FPGA, CPLD etc. ↵drath1-2/+2
configuration - added support for loading .bit files into Xilinx Virtex-II devices - added support for the Gateworks GW16012 JTAG dongle - merged CFI fixes from XScale branch - a few minor fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-05- correctly enter debug state on a "soft_reset_halt" commanddrath1-1/+1
- several small fixes - retry reading from a FT2232 device on incomplete reads git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-28- str9x flash support (Thanks to Spencer Oliver)drath3-38/+138
- str75x flash support (Thanks to Spencer Oliver) - correct reporting of T-Bit in CPSR (Thanks to John Hartman for reporting this) - core-state (ARM/Thumb) can be switched by modifying CPSR - fixed bug in gdb_server register handling - register values > 32-bit should now be supported - several minor fixes and enhancements git-svn-id: svn://svn.berlios.de/openocd/trunk@100 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-17- Added support for native MinGW builds (thanks to Spencer Oliver and ↵drath9-7/+286
Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-23- added support for AT91SAM7A3 flash (patch from andre renaud, thanks)drath1-1/+50
- fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-12- the 'help' command now takes an optional argument to display help only on ↵drath1-0/+9
a certain command (thanks to Andrew Dyer for this enhancement) - OpenOCD now includes the ability to diassemble instructions on its own (only ARM for now, Thumb might follow). The command is "armv4_5 disassemble <address> <count> ['thumb']" (thumb is currently unsupported). I've compared the produced disassembly against GDB/GNU Objdump output, and it seems to be correct, but there may still be some bugs left. git-svn-id: svn://svn.berlios.de/openocd/trunk@68 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-05- fixed some spelling errors (thanks to Andrew Dyer)drath1-3/+3
git-svn-id: svn://svn.berlios.de/openocd/trunk@67 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02- prepare OpenOCD for branching, created ./trunk/drath14-0/+1700
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.1 at 2024-08-19 12:17:09 +0000