Age | Commit message (Collapse) | Author | Files | Lines |
|
- fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin)
- retry JTAG chain validation (thanks to Magnus Lundin)
- reworked GDB packet input handling (thanks to Pavel Chromy)
- output error message when setting a watchpoint failed
- removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Asix for making this addition possible)
- added support for usbprog (thanks to Benedikt Sauter)
- make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy)
- register at_exit handler to do necessary unregistering (thanks to Pavel Chromy)
- added dummy ETM capture driver to allow ETM to be registered without a capture driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
fixing this bug)
- added declarations for 32bit fileio access functions (network byte order)
- fixed bug in etm trace dump file handling
- added XScale trace buffer decoding
- fixed arm_simulator ERROR numbers (-7xx used twice)
- fixed minor bug in debug output in stellaris.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@178 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- ST STM32x flash support added
- cleaned up armv7m and cortex-m3 support, removed luminary specific code
- cortex-m3 16bit read/write added (required for STM32x flash programming)
git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@175 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock
- inttypes.h now used for long long printf style declarations
git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Added support for NVGM bit 2 for AT91SAM7XC128/256
git-svn-id: svn://svn.berlios.de/openocd/trunk@172 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@171 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@170 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry
- added support for auto image type detection (thanks to Vincent Palatin)
- further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental)
git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
file containing gaps)
This checkin is still experimental, not recommended for general use
git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported)
- added XScale debug handler binary to repository
- added Thumb disassembling (thanks to Vincent Palatin for this patch)
- added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported)
This checkin is experimental, not suitable for general use
git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fixed arm926ej-s CP15 register access handling
- correctly identify SYSCLK source in LPC3180 NAND flash controller driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@139 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- output all of EmbeddedICE version register in error message
- update OpenOCD's idea of the current core mode, and immediately change core mode, on CPSR changes
- added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a lot)
- enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to Joerg Krein for providing test hardware)
git-svn-id: svn://svn.berlios.de/openocd/trunk@138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c
- free working area and register stuff if str7x block write algorithm failed
- check PC after exiting a target algorithm in armv4_5.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch)
- added support for accessing ETB (embedded trace buffer) registers
git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
configuration, too) should now go through the fileio subsystem
- added support for reading IHEX files (through fileio)
- load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex']
- added NAND framework (preliminary)
- added support for the LPC3180 SLC and MLC NAND controllers (preliminary)
- fix initialization for parport
- gw16012 fixes/cleanups
- added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far)
- added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers
git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
for noticing this bug and providing a fix)
git-svn-id: svn://svn.berlios.de/openocd/trunk@130 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- complain about identify_chain scan with all bits one (jtag communication problem)
- add 0x80000 as a valid size for lpc2000_v2 flash banks (previously only the user accessible 0x7d000 were valid)
git-svn-id: svn://svn.berlios.de/openocd/trunk@129 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin)
- fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this)
- add support for reading JTAG device id (currently only as debug output on startup)
- cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number.
- small cleanups/fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands
- added lattice ISP cable (experimental)
- properly initialize parallel port (clear tristate bit)
- fixed jtag/Makefile.am that failed with some versions of autotools
- print error number if read() in gdbserver.c failed on Windows
- fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug)
- added support for AT91SAM7SE internal flash
git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
configuration
- added support for loading .bit files into Xilinx Virtex-II devices
- added support for the Gateworks GW16012 JTAG dongle
- merged CFI fixes from XScale branch
- a few minor fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- several small fixes
- retry reading from a FT2232 device on incomplete reads
git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- added support for using Luminary Micro development board 'evb_lm3s811' as a JTAG interface (thanks to Magnus Lundin)
git-svn-id: svn://svn.berlios.de/openocd/trunk@106 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
interface)
- added support for AT91SAM7A devices (thanks to Magnus Lundin)
- updated README with pointer to Amontec's JTAGkeyTiny
git-svn-id: svn://svn.berlios.de/openocd/trunk@102 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- str75x flash support (Thanks to Spencer Oliver)
- correct reporting of T-Bit in CPSR (Thanks to John Hartman for reporting this)
- core-state (ARM/Thumb) can be switched by modifying CPSR
- fixed bug in gdb_server register handling
- register values > 32-bit should now be supported
- several minor fixes and enhancements
git-svn-id: svn://svn.berlios.de/openocd/trunk@100 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
list building)
- cleaned up str7x flash erase and protect code (use two accesses to erase sectors in both banks)
git-svn-id: svn://svn.berlios.de/openocd/trunk@98 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@96 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
and possible endianness problems (big endian hosts)
- correctly write trailing bytes on str7x flashes
- speed up str7x flash writing by offloading the algorithm to the target
git-svn-id: svn://svn.berlios.de/openocd/trunk@95 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
always little)
git-svn-id: svn://svn.berlios.de/openocd/trunk@92 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
broken on big-endian targets and/or hosts
- added access to ARM920T vector catch register (via generic register mechanism)
- don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache
- read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands)
- memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes)
- made in_handler independent from in field (makes the handler more flexible)
- added timeout to ft2232 when using D2XX library
- fixed STR7x protection bit handling on second bank (thanks to Bernard)
- added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen)
- fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen)
git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
jtag_interface_t.support_pathmove (it is used to indicate jtag_add_pathmove support)
- fixed small bug in str7x.c that printed an address instead of the target number in an error message
- added support for Olimex ARM-USB-OCD. The new ft2232 layout is called "olimex-jtag"
git-svn-id: svn://svn.berlios.de/openocd/trunk@87 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
(non-fatal)
- fixed some small memory leaks (thanks to Spencer Oliver)
- verify chip- and buswidth of cfi flash configurations
- added support for ARM966E based systems (tested only with ST micro STR9, thanks to Spencer Oliver)
git-svn-id: svn://svn.berlios.de/openocd/trunk@81 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
reset circuitry keeps lines asserted for too long.
- additional debug output when opening the parallel port
- fixed counting of available arm7/9 watchpoint units
- 'flash write' now displays elapsed time
git-svn-id: svn://svn.berlios.de/openocd/trunk@79 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Michael Fischer) - you still need to install GiveIO (not part of OpenOCD)
- Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too)
- various fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fix trunk build for mac os x (patch from Lauri Leukkunen, thanks)
- added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x)
- fixed bug where endianness of memory accesses could be swapped on BE hosts
- added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks)
git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|