aboutsummaryrefslogtreecommitdiff
path: root/doc/usb_adapters
AgeCommit message (Collapse)AuthorFilesLines
2024-01-29jtag/drivers: Add GPIO extender configuration function to ANGIE driverAhmed BOUDJELIDA1-11/+2
Add GPIO extender initial configuration that is needed to configure some important GPIOs and ensure that the dev board is ready to work. Add i2c_write function that make a write transfer to any slave device. Give a new Product ID to ANGIE to make it different than the non programmed ANGIE. Change-Id: I0a8dacb7fe218145b7d3ed1cb75f106ed6256714 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/8072 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2024-01-06doc: usb_adapters: update the script for unavailable reportsAntonio Borneo1-0/+18
When Linux HID driver binds the USB endpoints of the adapter, 'lsusb' fails to read all the reports and prints ** UNAVAILABLE ** Detect this case and alert the user, providing also the proper command to unbind the driver before running the script again. Put this test at the end of the output, so user can easily see it. Change-Id: Iaca00040e666b62ceebe4b842a24932799bde56a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reported-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: https://review.openocd.org/c/openocd/+/8046 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2023-12-24doc: usb_adapters: fix HID report in lsusb dump of few adaptersAntonio Borneo5-12/+137
Real dumps from adapters I have access to. Serial numbers have been manually edited but are still consistent. While there, rename a file to correct the USB PID. Change-Id: I4fd0b6661d55294c2ce0ecbead765def1143880c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: e0059dfffae4 ("doc: usb_adapters: add lsusb dump of few adapters") Reviewed-on: https://review.openocd.org/c/openocd/+/8047 Tested-by: jenkins
2023-12-16doc/usb_adapters: add dumps of two versions of Atmel EDBGTomas Vanek2-0/+422
USB HS based CMSIS-DAP v1 (HID) adapters found on Atmel/Microchip Xplained Pro development boards. Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Change-Id: I62a4b656dc6dce27da386e906d87088befc2bcbf Reviewed-on: https://review.openocd.org/c/openocd/+/8038 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2023-08-26contrib/firmware: add new i2c bit-banging feature to angie's firmwareAhmed BOUDJELIDA1-10/+49
add new i2c bit-banging feature, we can now connect in JTAG with the SoC target and in i2c with the main board components at the same time. Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52 Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7796 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-08-12contrib/firmware: add new adapter ANGIE's firmware/bitstream codeAhmed BOUDJELIDA1-0/+68
This is ANGIE's firmware and bitstream code. The 'Embeded C' code is based on the openULINK project. The hdl bitstream source code is for the spartan-6 FPGA included in ANGIE. Since ANGIE has a different microcontroller (EZ-USB FX2) than openULINK (EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed completely, so are the descriptors, interruptions and the endpoints configuration. Change-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7701 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-07-14doc:usb_adapters: add lsusb dump of STLINK-V3PWRAntonio Borneo2-0/+324
Add USB VID:PID 0483:3755 and 0483:3757. Change-Id: Iace29fa97f1b8e9d86078b9775561ca525635523 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7768 Tested-by: jenkins
2023-01-28doc:usb_adapters: add lsusb dump of esp_usb_jtagErhan Kurubas2-0/+135
Also, esp_usb_jtag added to the supported driver list of "adapter serial" command. Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com> Change-Id: Ie65cbf9b44f5de6d7995102d1a281161468f6103 Reviewed-on: https://review.openocd.org/c/openocd/+/7440 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2023-01-15doc: usb_adapters: add other adaptersAntonio Borneo10-0/+1232
Mainly get from web or from OpenOCD users Change-Id: Id4d6354bc9b6972622adfacf3549c7c3e0549bc2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7298 Tested-by: jenkins
2023-01-15doc: usb_adapters: add lsusb dump of few adaptersAntonio Borneo19-0/+2606
Real dumps from adapters I have access to. Serial numbers have been manually edited but are still consistent. Change-Id: Iee2d16e09615746e29588f91fdfb77eb9fad4daa Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7297 Tested-by: jenkins
2023-01-15doc: usb_adapters: add container for lsusb dump of adaptersAntonio Borneo2-0/+67
When extending an existing adapter driver, developer has to carefully avoid to break backward compatibility. But not all developers have access to many adapters for testing. Prepare a folder aimed at containing 'lsusb -v' dumps of adapters to be used as reference. Add documentation and a simple dump script. Change-Id: Ia3a9132d65ec8869734721f9605cebcebcf33608 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: https://review.openocd.org/c/openocd/+/7296 Tested-by: jenkins
generated by cgit v1.1 at 2024-07-18 05:12:14 +0000