aboutsummaryrefslogtreecommitdiff
path: root/doc/openocd.texi
AgeCommit message (Collapse)AuthorFilesLines
2017-08-10Support for STM32F722, F723, F413 and F423Andreas Bolsch1-4/+9
IDs for STM32F722, F723, F413 and F423 added, handling of PCROP for F722/723 and additional nWPRT bits for F413/423 implemented. The additional protection bit positions for F413/423 conflict with other options bits for the F7xx variants, additionally the last two sectors share a common bit. Protection for F413 and F767/777 now use protection blocks rather sectors for dealing with protections bits. Checking for halted state in 'lock' and 'unlock' removed: When PCROP is activated in F723, halted state is not detected properly, but lock/unlock sequence is required to disable PCROP. Tested with STM32F723E-Disco, STM32F413ZH-Nucleo. Change-Id: Ie6ddab47a9ae8461087d369b4f289b7f9d1e031c Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/4045 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-08-10log: Add a new debug level (4) for verbose I/O debugAndreas Fritiofson1-3/+5
Change ftdi SWD driver and CMSIS-DAP to use it instead of LOG_DEBUG(). Change-Id: I17ba3de2086c7159209db61fba3faf067dfc5023 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3805 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-06-17flash/nor/tcl: Make read_bank parameters optionalMarc Schink1-2/+4
Make 'offset' and 'length' parameters optional, if both are omitted simply read the whole flash bank. Additionally, check if the 'offset' and 'length' arguments are out of bounds of the flash bank. Change-Id: Ib9c1b0538a2c78ebcf702e2da11468dff407f8ff Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3862 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-06-17flash/nor/tcl: Make write_bank parameter optionalMarc Schink1-2/+3
Make the 'offset' parameter optional, if omitted simply start at the beginning of the flash bank. Additionally, check if the argument is out of bounds of the flash bank. Change-Id: I8e9632b539ad9e83211e1ac6a06da4c8109cbc60 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3860 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-06-17flash Kinetis: add KL28 deviceTomas Vanek1-0/+5
This device differs a lot from others in KL series. Unfortunately the System Integration Module, where device identification resides, moved to a new address so probe now have to try both addresses of SIM_SDID. Introduce a new bank creation option: -sim-base to ensure error free probe. WDOG32 is slightly different from KE1x and on different address. System Mode Controler changed layout to word aligned. Change-Id: I2c9dca0c4ad4228fcc941d6078d15f5e394833ff Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4059 Tested-by: jenkins Reviewed-by: Joakim Nohlgård <joakim.nohlgard@eistec.se> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-06-17flash Kinetis: implement automatic bank creation based on device probeTomas Vanek1-0/+6
Kinetis flash driver services huge number of MCU types. They have one, two or four flash banks with option of FlexNVM. It would require ~36 config files just for Kx series, more for KLx, KVx and KE1x. The change implements alternative approach: - configuration file creates just one pflash bank (common for all devices) - when a device is probed, additional pflash or flexnvm banks are created based on flash layout of the connected MCU - created banks have names with optional numbering e.g. kx.pflash0 kx.pflash1 kx.flexnvm0 kx.flexnvm1 - the first bank gets renamed if numbering is used Automatic bank creation is enabled by tcl command 'kinetis create_banks'. Used solution has a drawback: other banks than pflash0 are not accessible until pflash0 is probed. Fortunately gdb attach and standard programming accesses banks in right sequence. Change-Id: I5b9037cbefdb8a4176b7715fbcc3af4da4c1ab60 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3925 Tested-by: jenkins Reviewed-by: Joakim Nohlgård <joakim.nohlgard@eistec.se> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-06-17tcl/target: make sure kex.cfg is not used for Kinetis KE1x familiesTomas Vanek1-2/+3
Config file renamed to ke0x.cfg and a notice added to texi. While on ke0x.cfg CPUTAPID setting fixed: device has SWD port only, no JTAG. Removed per device configs as they set CHIPNAME and nothing more. Let's use reasonably universal chip name 'ke' set in family config. Change-Id: I313db87a59f25f968eb3c27df155780b67becee8 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3897 Tested-by: jenkins Reviewed-by: Ivan Meleca <ivan@artekit.eu> Reviewed-by: Joakim Nohlgård <joakim.nohlgard@eistec.se> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-06-17flash Kinetis: add KE1xZ and KE1xF familiesTomas Vanek1-1/+3
The new Kinetis KE1x families use FTFE flash controller unlike KE0x. Also SDID coding corresponds to new K, KL and KV families. That's why KE1x is handled by kinetis driver instead of kinetis_ke Change-Id: Ibb73e28e41dfbb086e761e1f006b089825dab854 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3896 Tested-by: jenkins Reviewed-by: Joakim Nohlgård <joakim.nohlgard@eistec.se> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-05-31flash: Add support for Atheros (ath79) SPI interfaceTobias Diedrich1-0/+39
Supported SoCs: AR71xx, AR724x, AR91xx, AR93xx, QCA9558 Extended and revised version of my original patch submitted by Dmytro here: http://openocd.zylin.com/#/c/3390 This driver is using pure SPI mode, so the flash base address is not used except some flash commands (e.g. "flash program") need it to distinguish the banks. Example config with all 3 chip selects: flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0 flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1 flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2 Example usage: > flash probe flash0 Found flash device 'win w25q128fv' (ID 0x001840ef) flash 'ath79' found at 0x00000000 > flash probe flash1 No SPI flash found > flash probe flash2 No SPI flash found > flash banks > flash read_bank flash0 /tmp/test.bin 0x00000000 0x1000 reading 4096 bytes from flash @0x00000000 wrote 4096 bytes to file /tmp/test.bin from flash bank 0 at offset 0x00000000 in 28.688066s (0.139 KiB/s) Change-Id: I5feb697722c07e83a9c1b361a9db7b06bc699aa8 Signed-off-by: Tobias Diedrich <ranma+openocd@tdiedrich.de> Reviewed-on: http://openocd.zylin.com/3612 Tested-by: jenkins Reviewed-by: Dmytro <dioptimizer@hotmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-05-31imx_gpio: add mmap based jtag interface for IMX processorsGrzegorz Kostka1-0/+15
For some targets (like nrf51) sysfs driver is too slow. This patch implements memory maped driver for IMX processors. Mostly based on bcm2835gpio. Tested on imx6ul CPU. However, it should work on any NXP IMX CPU. Change-Id: Idace4c98181c6e9c64dd158bfa52631204b5c4a7 Signed-off-by: Grzegorz Kostka <kostka.grzegorz@gmail.com> Reviewed-on: http://openocd.zylin.com/4106 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-05-12jtag/drivers: Add Cypress KitProg driverForest Crossman1-0/+56
This patch adds a driver for the SWD-only Cypress KitProg programmer/debugger. Change-Id: I3a9a8011a762781d560ebb305597e782a4f9a8e5 Signed-off-by: Forest Crossman <cyrozap@gmail.com> Reviewed-on: http://openocd.zylin.com/3221 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-04-24flash/nor/tcl: Make verify_bank parameter optionalMarc Schink1-2/+3
Make the 'offset' parameter optional, if omitted simply start at the beginning of the flash bank. Additionally, check if the argument is out of bounds of the flash bank. Change-Id: Id1959eee5c395666c35f26342c3c50134dd564e5 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3858 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-04-02aarch64: add some documentationMatthias Welwarsky1-4/+33
document aarch64 specific commands and common ARMv7 and v8 DAP commands Change-Id: Icbb76209735ec734f2e67f82bfc7270edb40ad0b Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4008 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-01-15flash/nor: fix doc/help and range test for flash protectTomas Vanek1-3/+6
Commit 77a1c01ccbb1150ffe749a7373cf6c4dc15ecad0 introduced infrastructure for utilizing protection blocks of different size than erase sector. Parts of doc/help kept reading 'sector' instead of 'protection block'. flash_driver_protect() parameter range testing did not switched to bank->num_prot_blocks. This change fixes it. Change-Id: Iec301761190a1a1bcc4cb005a519b9e5e4fede51 Reported-by: Mark Odell <mark@odell.ws> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3917 Tested-by: jenkins Reviewed-by: Mark Odell <mrfirmware@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-01-15doc: Improve ftdi driver sectionAndreas Fritiofson1-7/+11
Fix typo and a sentence that sounds strange since the ft2232 driver was removed. Add documentation for the SWD signal usage. Remove the text mentioning a default VID:PID which doesn't exist. Change-Id: I27eba571f2f7c46bdb6ae623ab285595018e99d9 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3935 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-25doc: fix underfull and overfull boxesPaul Fertser1-11/+17
This is needed to generate PDF user manual without typesetting artifacts. Change-Id: Ibcbd804dac2b9415459327f53f6fad0dc38fa5c6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3919 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-25doc: add a cross-reference to GDB threading commandsPaul Fertser1-1/+5
Change-Id: If4766ba0053fc94cd47495e442fcf288241af218 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3557 Tested-by: jenkins
2016-12-08jlink: Add EMUCOM supportMarc Schink1-0/+20
EMUCOM is a way to communicate with a J-Link device via so called channels. A channel can either be read or written in a single operation. Beside the reserved channels for SEGGER, there are channels available to implement vendor and/or device specific functionalities. For example, EMUCOM is used on many starter and development kits from Silicon Labs to access power measurements and various other information and settings. Change-Id: I6094109c043b34aed4a40ceabe71f30ff896bf1d Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3794 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08cortex_m: allow setting debug ap during createMatthias Welwarsky1-0/+4
This patch adds a Cortex-M private configuration option that allows setting the acess point during target creation. This circumvents situations in hybrid systems when the correct access point can not be automatically detected. Change-Id: If313a5250e6e66509bb9080f3498feab7781dced Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3639 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jtag/drivers/openjtag: Add support for Cypress CY7C65215Vianney le Clément de Saint-Marcq1-0/+21
The Cypress CY7C65215 Dual Channel USB-Serial Bridge Controller [1] understands the OpenJTAG protocol over a proprietary USB interface. This patch adds support for the CY7C65215 to the openjtag interface driver. A new configuration option, `openjtag_variant`, allows to select the transport to use. Libusb (1.x or 0.1) is now a hard dependency of the openjtag driver. This should not be a big issue as libftdi also depends on it. [1] http://www.cypress.com/?rID=82870 Change-Id: I55ffb3fd9e006eb311e405d9fb836bb119644bfd Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: http://openocd.zylin.com/2805 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08semihosting: support fileio operationSteven Stallion1-0/+11
This patch adds support for bridging semihosting to GDB's File-I/O remote protocol extension. For the most part operations match up 1:1, however some require a working area to complete successfully, namely operations that devolve to read, stat, and gettimeofday. A new command was added to enable support for fileio named `arm semihosting_fileio`, which ensures that the default behavior remains intact for those that prefer it. Finally, redundant logging was removed from the target_arch_state function; this permits ARM targets to quiesce log output when polling for a fileio reply. This prevents filling the logs with halt/resume messages when using semihosting fileio. Change-Id: Ifbb864fc2373336a501cc0332675b887b552e1ee Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3566 Tested-by: jenkins Reviewed-by: Steven Stallion <sstallion@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08rtos: add support for uC/OS-IIISteven Stallion1-2/+8
This patch introduces RTOS support for uC/OS-III. Currently, only FPU-less ARM Cortex-M targets are supported. Due to the configurability of the RTOS, an OpenOCD-specific file must be linked along with the project to determine the correct offsets within the OS_TCB structure. In addition to the above, a crash was fixed in rtos_get_gdb_reg_list such that RTOS support could be used between resets without restarting OpenOCD and support for the Hg packet was cleaned up. Change-Id: Ide004a689e6b886185df665c00fb644629eb31d1 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3556 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08target: Add verify_image_checksum commandMatthias Welwarsky1-0/+7
This avoids the secondary binary search if the checksum is different Change-Id: I986ba7687cea76f30e37a6bca58aabde18198263 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/2869 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Add -defer-examine option to target create commandMatthias Welwarsky1-1/+5
The '-defer-examine' option to target create allows declaring targets that are present on the chain, but not fully functional. They will be skipped by the initial arp_examine as well as arp_examine after reset. Manual examine using 'arp_examine' is needed to examine them, with the idea that some kind of actions is neeed to bring them to a state where examine will succeed (if at all possible). In order to allow value less options to target command, I had to relax the goi.argc check in jim_target_configure(). Change-Id: I9bf4e8d27eb6476dd9353d15f48965a8cfd5c122 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3076 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-11-06Remove support for the GPL incompatible FTDI D2XX libraryAndreas Fritiofson1-1/+1
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi only. Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3237 Tested-by: jenkins Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06Remove since long deprecated ft2232 driverAndreas Fritiofson1-110/+3
Purge all legacy interface configurations so there's no more confusion over which one to use. Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just duplicates what INSTALL says. Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3236 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-05Replace "daemon" with "server" in user-visible stringsPaul Fertser1-10/+10
Since OpenOCD doesn't fit most common definitions of the word "daemon", using it in the documentation is confusing. Reported by IRC user ohsix. Change-Id: I688d722771b084b17c2a7af8e83fd64bab6141b8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3634 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-10-17gdb server: Add back support to disable the gdb server via the gdb_port configSandeep Mistry1-1/+1
As per the documentation, used "disabled" as the value to disable, as this is the same value to disable the telnet and tcl server. Change-Id: Idc4a8580098ec1107dcc6e1f59e817ecdebc38ac Signed-off-by: Sandeep Mistry <s.mistry@arduino.cc> Reviewed-on: http://openocd.zylin.com/3175 Tested-by: jenkins Reviewed-by: Cristian Maglie Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-08-14flash Kinetis: Implement flash protection settingTomas Vanek1-0/+17
Kinetis family employs strange concept of Flash Configuration Field at address 0x400 of program flash. Writing incorrect data to FCF may permanently lock the device. The change introduces 'kinetis fcf_source protection' mode. In this mode write of flash image data to FCF is prevented. FCF data build from protection (set by 'flash protect' command) are written instead. FCF data are written also just after erase of relevant sector. It protects device from locking security by reset or power cycle after erase. prot_blocks array is used as protection blocks have bigger size than sectors. Alignment and padding programming sections is rewritten to fix writing with not section boundary aligned begin. Change-Id: I9fc8bd37d6f627fb8ed7abb7f7560e78a740b195 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3562 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-08-14flash/nor: implement protection blocks of different size than erase sectorTomas Vanek1-2/+4
Originally flash/nor infrastructure assumed protection blocks identical to erase sectors. This assumption is not valid for many flash types. Driver code fixed the problem either by increasing sector size to size of protection block or by defining more protection block than really existed in device. Both cases had drawbacks. The change retains compatibility with the old driver. Updated driver can set protection blocks table independent of sector table. Change-Id: I27f6d267528ad9ed9fe0a85f05436a8ec17603a4 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3545 Tested-by: jenkins Reviewed-by: Steven Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14kinetis: support mass erase on boards without SRSTSteven Stallion1-4/+14
NXP (nee Freescale) documents the mass erase procedure using the MDM-AP block in AN4835. Existing support for this feature did not properly handle boards without SRST. This patch updates the mass_erase command such that it works correctly on these boards. Additionally, the core is left in a halted state once complete to prevent reset loops due to the watchdog as reported by some users. Since the MDM-AP provides an additional method of halting and resetting the core that is disconnected from the DAP, additional commands are provided to manage this state. These commands are particularly helpful when connecting to a target with an unknown state. Change-Id: I40f006d5d964befb12b019c5d509988decdd3f91 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3540 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-14ftdi: Added a method to read the signal valuesStephen Tridgell1-3/+10
Change-Id: Ie32a372bbc57249b4802d900234a0e8e7d1d1830 Signed-off-by: Stephen Tridgell <stephen.tridgell@exablaze.com> Reviewed-on: http://openocd.zylin.com/2556 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-08-14doc: correct and standardize instructions for disabling TCP serversPeter A. Bigot1-3/+3
The instructions to set the port to zero to disable a service has not worked for several years: the effect of doing so is to start the service on a port randomly selected by the bind(2) system call. Update the documentation to reflect the new standard way of disabling network services. Change-Id: Ic5315a80f9956ea195f63e05d30d604a980bbc8f Signed-off-by: Peter A. Bigot <pab@pabigot.com> Reviewed-on: http://openocd.zylin.com/3638 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14Flash handling for STM32F76x/77x and F446 addedAndreas Bolsch1-2/+15
- added ids for various parts - rewrite of sector allocation to deal with dual-bank F76x/77x - single- / dual-bank mode for F76x/77x - sector protection adapted for F76x/77x in dual-bank mode - handling of additional option bits (28-31) in FLASH_OPTCR in options_read and options_write for F42x/43x/469/479/7xx, options bits 0-1 masked out - check for sensible value of user_options in options_write - some #defines clarified, non-needed ones removed - docs updated (options read, options write) Change-Id: Ie4db80e60baa7d2663e024ab1f278640b1ce901b Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-on: http://openocd.zylin.com/3526 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-07-17arm_adi_v5: add dap apreg command for AP register read/writeTomas Vanek1-0/+6
A developer tool: Direct access to AP registers can be useful for handling vendor specific AP like Freescale Kinetis MDM or Atmel SMAP. Change-Id: Ie2c7160fc6b2e398513eb23e1e52cbb52b88d9bd Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2777 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-07-17server: support binding to arbitrary interfacesSteven Stallion1-0/+5
Some installations of OpenOCD are used in restricted environments that do not permit binding to public interfaces. This patch does not affect the default behavior to listen on all interfaces, however it does give the option to restrict services by way of the bindto command. Change-Id: Id51bd64b376a8c62dd47b08b4d834872925e6af2 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3534 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-06-23cfi: Add support for strangely endianness broken SoC implementationsEsben Haabendal1-0/+2
This adds the 'data_swap' parameter to the CFI driver, which enables swapping of data bytes when writing/programming words to the flash. Note, that this specifically means that bytes are not swapped when writing command words to the flash chip. Unless you are using the SAP in an LS102x chip to program an attached 16-bit NOR flash, you hopefully do not need this! Change-Id: I1e6f7169da36f373c880d1756d9c21c9957acc50 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Reviewed-on: http://openocd.zylin.com/3109 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-06-23Support for Freescale LS102x SAPEsben Haabendal1-0/+2
The SAP in LS102x SoC's from Freescale is able to read and write to all physical memory locations, independently of CPU cores and DAP. This implementation is 100% based on reverse-engineering of JTAG communication with an LS1021A SAP using a JTAG debugger with SAP support. And as such, this code is for now "works-for-me", pending verification by other OpenOCD users, or even better, actual information from Freescale on the SAP interface. Change-Id: Ibb30945e017894da5c402f9f633fc513bed4e68c Signed-off-by: Esben Haabendal <esben@haabendal.dk> Reviewed-on: http://openocd.zylin.com/3096 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-05-20Fix spelling of ARM CortexAndreas Färber1-7/+7
It's Cortex-Xn, not Cortex Xn or cortex xn or cortex-xn or CORTEX-Xn or CortexXn. Further it's Cortex-M0+, not M0plus. Cf. http://www.arm.com/products/processors/index.php Consistently write it the official way, so that it stops propagating. Originally spotted in the documentation, it mainly affects code comments but also Atmel SAM3/SAM4/SAMV, NiietCM4 and SiM3x flash driver output. Found via: git grep -i "Cortex " git grep -i "Cortex-" | grep -v "Cortex-" | grep -v ".cpu" git grep -i "CortexM" Change-Id: Ic7b6ca85253e027f6f0f751c628d1a2a391fe914 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3483 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-16doc: Fix mismerges of fm4, kinetis and kinetis_ke flash driversAndreas Färber1-18/+18
Commit dfc6658cf98d494e066426945879b9f60bbf9678 ("Kinetis: flash driver described in openocd.texi") inserted a kinetis section between fm3 and lpc2000. Then commit 43ff5acd45017fd9828cc56f54b929e600956c3b ("flash: New Spansion FM4 flash driver") was merged, inserting the fm4 section between kinetis and lpc2000, instead of after fm3. Finally kinetis_ke was added between kinetis and fm4 in commit 5396ec5dcc64354c8101f8d3f16d498ca3b10326 ("flash: Added support for Freescale Kinetis KE family."). Restore the alphabetical order by moving the fm4 section to before kinetis. Change-Id: I77e47c3cd5b2cd8570b62ff2f7be8526aaf57ad0 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3484 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
2016-05-14flash/nor: Add Ambiq Micro Apollo flash driver.Rick Foos1-0/+46
Initial release of Ambiq Micro Apollo flash driver supporting our sub-threshold (low power) Cortex M4F part, and Evaluation Kit. We have been shipping openocd to our customers for about one year. The EVK boards are SWD only using ftdi. We also use two of the other COM instances to display debug information. It takes about 15 seconds to flash 512K, and mass erase is about 5 seconds. Tested by internal verification group, FAE's, and customer sites. Merged commit 'refs/changes/17/3417/1' as suggested. Makefile.am and drivers.c follow the new format to avoid conflicts. Removed unused fault_capture command. Added documentation for flash driver. Change-Id: Iae92d869369c6827244f0071f9cb522d8d91fed8 Signed-off-by: Rick Foos <rfoos@solengtech.com> Reviewed-on: http://openocd.zylin.com/3230 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05Support for debug interface lock of EFM32 controllersLieven Hollevoet1-0/+8
The capability to lock the debug interface on EFM32 controllers was lacking in OpenOCD. After receiving some pointers by zapb_ and PaulFertser on IRC (thanks guys!) I have added this capability. This works by writing the required bits in the debug lock word to '0'. Note: there is currently no way to re-enable the debug interface from OpenOCD as doing this requires specific pin wiggling that is currently not implemented yet. However: having the capability to lock the debug interface is useful when building a volume programming jig. You can flash the program code, verify and then lock the debug interface so that the device cannot be read when it is deployed in the field. Change-Id: If2d562dfdb4b95519785a4395f755d9ae3d0cf12 Signed-off-by: Lieven Hollevoet <hollie@lika.be> Reviewed-on: http://openocd.zylin.com/3389 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05ftdi: make ftdi_location command depend on libusb1 versionMatthias Welwarsky1-0/+2
The function libusb_get_port_numbers(), required for the command ftdi_location, is only available in recent version of libusb1. Compilation will break if the function is not available. This patch enables the command only if libusb1 contains the necessary function. Change-Id: I091e72dafa4ed22eea51692751d43246a8152987 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3396 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05flash/nor: Add Infineon XMC1000 flash driverAndreas Färber1-0/+5
The XMC1000 family uses a very different flash interface from XMC4000. Tested on XMC 2Go and XMC1100 Boot Kit. Change-Id: I3edaed420ef1c0fb89fdf221022c8b04163d41b3 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3418 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2016-05-04flash: Added support for Freescale Kinetis KE family.Ivan Meleca1-0/+27
Tested with MKE04Z8VTG4, MKE02Z64VLC4 and MKE02Z64VLD2. Change-Id: I606e32a2746a3b96d3e50f3656ba78d40c41c1ea Signed-off-by: Ivan Meleca <ivan@artekit.eu> Reviewed-on: http://openocd.zylin.com/3380 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-03-24ftdi: allow selecting device by usb bus locationMatthias Welwarsky1-0/+8
This patch adds a 'ftdi_location' command to select an adapter by usb bus number and port path. This is helpful if you have a rack full of adapters in a testing or manufacturing setup where the only constant is the physical usb bus location of the adapter you want to address. Vid:Pid are not unique, serial number _may_ be unique (and maybe not with embedded adapters) but will change when a new target is plugged. Specifying a location allows to understand instantly which board failed bringup or testing. Change-Id: I403c7c6c8e34fe42041b3f967db80f3160a4f1a3 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3351 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-29fm4: Add support for S6E2DH familyAndreas Färber1-1/+1
Add support for S6E2DH MainFlash. VFlash is not implemented. Briefly tested with SK-FM4-176L-S6E2DH V110 board. Change-Id: If7c523d8c75307bc1494bbf4cca3eed0272e8e01 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3158 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29fm4: Add support for MB9BFx64/x65Andreas Färber1-1/+1
These appear to be just additional flash size configurations. Entirely based on manual, untested. Change-Id: I4460dc1a588335df8fc0a385d24513a4e35b6951 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3157 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29flash: New Spansion FM4 flash driverAndreas Färber1-0/+18
The Spansion FM4 family of microcontrollers does not offer a way to identify the chip model nor the flash size, except for Dual Flash vs. regular layout. Therefore the family is passed as argument and wildcard-matched - MB9BFx6x and S6E2CC families are supported. Iterations showed that ... 1) Just doing the flash command sequence from SRAM loader code for each half-word took 20 minutes for an 8 KB block. 2) Doing the busy-wait in the loader merely reduced the time to 19 minutes. 3) Significant performance gains were achieved by looping in loader code rather than in OpenOCD and by maximizing the batch size across sectors, getting us down to ~2 seconds for 8 KB and ~2.5 minutes for 1.1 MB. (Tested with SK-FM4-176L-S6E2CC-ETH v11, CMSIS-DAP v23.) gcc, objcopy -Obinary and bin2char.sh are used for automating the integration of hand-written assembler snippets. Change-Id: I092c81074662534f50b71b91d54eb8e0098fec76 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2190 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-15Kinetis: flash driver described in openocd.texiTomas Vanek1-0/+58
Change-Id: Id3410fc94f73191e3d7810115676046e5c760a0b Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3014 Tested-by: jenkins
generated by cgit v1.1 at 2024-10-13 07:13:33 +0000