aboutsummaryrefslogtreecommitdiff
path: root/configure.in
AgeCommit message (Collapse)AuthorFilesLines
2009-11-24add jtag/usb_common.[ch] filesZachary T Welch1-0/+2
Begins to consolidate code used by several USB JTAG interfaces. This first patch provides the required build system changes and a common jtag_usb_open routine, which will replace the guts for probing the busses and devices for possible VID/PID matches. The following patches convert each driver to use it.
2009-11-17allow documentation to be configuredZachary T Welch1-0/+18
Add --disable-doxygen-html and --enable-doxygen-pdf options to the configure script, allowing user to change the defaults. These update the proess of munging the Doxygen configuration file to use the settings thusly provided. Add options in README.
2009-11-12WinXP-x64: find right D2XX librariesLiam Redmond1-2/+2
This trivial patch allows the config script to find the correct FTDI2xx libraries under Windows XP x64 using msys. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04Version 0.4.0-devDavid Brownell1-1/+1
Add "-dev" tag. Update minor version number. Archive old NEWS file, start a new one.
2009-11-04Version 0.3.0David Brownell1-1/+1
Remove -dev tag, remove -rc tag. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04configure: fix build problems with eCosØyvind Harboe1-6/+57
Various include files require some other include files to be included first. Copied solution from net/if.h. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-10-28Bump rc version and add -dev tag.Zachary T Welch1-1/+1
Bump rc package version number: 0.3.0-rc0 -> 0.3.0-rc1 Add '-dev' version tag: 0.3.0-rc1 -> 0.3.0-rc1-dev
2009-10-28The openocd 0.3.0-rc0 release.Zachary T Welch1-1/+1
Remove '-dev' version tag: 0.3.0-rc0-dev -> 0.3.0-rc0
2009-10-22ETM: rename registers, doc tweaksDavid Brownell1-1/+2
The register names are perversely not documented as zero-indexed, so rename them to match that convention. Also switch to lowercase suffixes and infix numbering, matching ETB and EmbeddedICE usage. Update docs to be a bit more accurate, especially regarding what the "trigger" event can cause; and to split the issues into a few more paragraphs, for clarity. Make "configure" helptext point out that "oocd_trace" is prototype hardware, not anything "real". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-19MinGW: always use "-D__USE_MINGW_ANSI_STDIO"Redirect 'Slash' NIL1-0/+2
This is unfortunately needed to make stdio work like OpenOCD expects -- matching the ANSI-C standard, instead of MS-Windows. I tested it in both MinGW-W64 on Vista 64 and MinGW-W32 on XP, and I don't see any adverse effects to enabling it for all MinGW versions.
2009-10-16xscale: better fix for debug_handler.binDavid Brownell1-1/+0
Generate a C struct with the data, and use that, instead of an assembly language file. The assembly language causes issues on Darwin and MS-Windows, which don't necessarily use GNU AS; or if they do, don't necessarily use its ELF syntax. It's also better in two other ways: fewer global symbols; and the init-time size check gets optimized away at compile time. (Unless it fails, in which case bigger chunks of the file vanish.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-12simplify XScale debug handler installationDavid Brownell1-0/+1
Load the XScale debug handler from the read-only data section instead of from a separate file that can get lost or garbaged. This eliminates installation and versioning issues, and also speeds up reset handling a bit. Plus some minor bits of cleanup related to loading that handler: comments about just what this handler does, and check fault codes while writing it into the mini-icache. The only behavioral changes should be cleaner failure modes after errors during handler loading, and being a bit faster. NOTE: presumes GNU assembly syntax, with ".incbin"; and ELF, because of the syntax of the ".size" directive. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-07Change version labels to work better with GITdbrownell1-1/+1
- The guess-rev.sh script is now a tweaked version of "setlocalversion" as seen in Linux, U-Boot, and various other projects. When it finds source control support (git, hg, svn) it uses IDs from there. Else (specific to this project) it reports itself as "-snapshot", e.g. from gitweb. I verified this new "guess-rev.sh" script runs under Cygwin. - Also update the generic version strings to be like "0.3.0-dev" (during development) instead of the very long "0.3.0-in-development". These also show up in the PDF docs. For better tracking, we might eventually change these strings to include the version IDs too. - Change the startup banner version strings so they include the guess-rev output. Development and release versions with GIT will be like Open On-Chip Debugger 0.3.0-dev-00282-g7191a4f-dirty (2009-10-05-20:57) Open On-Chip Debugger 0.3.0 (2009-10-05-20:57) instead of the previous SVN-specific (even when using git-svn!) Open On-Chip Debugger 0.3.0-in-development (2009-10-05-01:39) svn:exported Open On-Chip Debugger 0.3.0 (2009-10-05-01:39) Release git-svn-id: svn://svn.berlios.de/openocd/trunk@2809 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-20- remove enable-ft2232-highspeed configure option, high speed ftdi support ↵ntfreak1-20/+8
is now detected during the configure stage - warning now issued if high speed ftdi device found and openocd was built using an old driver git-svn-id: svn://svn.berlios.de/openocd/trunk@2599 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18Jonas Horberg [jhorberg@sauer-danfoss.com]ntfreak1-47/+69
https://lists.berlios.de/pipermail/openocd-development/2009-August/009939.html 1. It can only be built with the FTD2XX driver. libftdi supports FT2232H/FT4232H since version 0.16 2. A speed value of 0 is used as a RTCK request indicator. This clashes with the valid clock division value 0 that provide the highest fixed clock frequency. 3. The ft2232_speed_div function return the maximum selectable frequency (30MHz) when RTCK is activated. It should return 0. 4. The ft2232_khz function return ERROR_OK when RTCK is requested even for devices lacking RTCK support. It should return ERROR_FAIL so the upper driver layers can detect this and try to fallback to a fixed frequency. 5. FT2232H/FT4232H have a backward compatibility function that divide the clock by 5 to get the same frequency range as FT2232D. There is no code that disable this functionality. I can not find anything about if this is enabled or disabled by default. I think it is safest to actively disable it. git-svn-id: svn://svn.berlios.de/openocd/trunk@2591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-31- add configure error if building parport interface under cygwin and ↵ntfreak1-0/+4
sys/io.h missing git-svn-id: svn://svn.berlios.de/openocd/trunk@2571 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-16- disable using parport ppdev under win32 hostsntfreak1-0/+2
git-svn-id: svn://svn.berlios.de/openocd/trunk@2545 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14Bump minor version and add tag:zwelch1-1/+1
Bump minor package version number: 0.2.0 -> 0.3.0 Add '-in-development' version tag: 0.3.0 -> 0.3.0-in-development git-svn-id: svn://svn.berlios.de/openocd/trunk@2521 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14Remove '-in-development' version tag: 0.2.0-in-development -> 0.2.0zwelch1-1/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@2517 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-14Make the parport-ppdev option enabled by default. This may require zwelch1-1/+1
giving --disable-parport-ppdev to configure on some platform(s). git-svn-id: svn://svn.berlios.de/openocd/trunk@2514 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06- fix build when using a cross compiler - do not try and run any host toolsntfreak1-1/+6
- add missing types.h when platform does not contain elf.h git-svn-id: svn://svn.berlios.de/openocd/trunk@2482 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02Remove --enable-release option; if guess-rev.sh is missing, it is a release.zwelch1-8/+11
git-svn-id: svn://svn.berlios.de/openocd/trunk@2456 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Extend 'make dist' to produce both .tar.bz2 and .zip archives, tozwelch1-1/+1
complement to the standard .tar.gz package. Now, pick your poison! git-svn-id: svn://svn.berlios.de/openocd/trunk@2437 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-24- correct configure ftd2xx highspeed testntfreak1-1/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@2385 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-20Set default for want_ftd2xx_highspeed to "no" instead of "maybe"mifi1-1/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@2295 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17dummy driver now works under eCosoharboe1-3/+14
git-svn-id: svn://svn.berlios.de/openocd/trunk@2268 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09Improve use of automake conditionals for FTDI-based JTAG drivers:zwelch1-2/+2
- Remove once-used XXX_FTD2XX symbols; replace with XXX_DRIVER symbols. - Enabled when either libftdi or FTD2xx driver should be built. - Eliminates redundant DRIVERSFILE assignment in JTAG automake input. git-svn-id: svn://svn.berlios.de/openocd/trunk@2177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09Add a rule to rebuild libtool if ltmain.sh changes (from libtool docs).zwelch1-0/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@2174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09dos2unixoharboe1-1028/+1028
git-svn-id: svn://svn.berlios.de/openocd/trunk@2170 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09remove native line styleoharboe1-1028/+1028
git-svn-id: svn://svn.berlios.de/openocd/trunk@2154 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08update zy1000 to latest minidriver workoharboe1-6/+5
git-svn-id: svn://svn.berlios.de/openocd/trunk@2132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08Zach Welch wrote a fix for configure problems under Cygwin. oharboe1-13/+13
ltmain.sh is added to svn ignore git-svn-id: svn://svn.berlios.de/openocd/trunk@2131 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08Adjust whitespace in configure script: use two spaces for indent.zwelch1-257/+258
git-svn-id: svn://svn.berlios.de/openocd/trunk@2106 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08Reorder configure script macros:zwelch1-22/+27
- Check for a compiler before looking for libraries or header files. - Initialize automake before calling other AM_ macros. - Disable libtool shared libraries by default. - Remove checks for unused C++, Fortran, and Java compilers. - Remove redundant AC_CANONICAL_HOST; called by AC_PROG_LIBTOOL. git-svn-id: svn://svn.berlios.de/openocd/trunk@2105 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08Rework parallel port configure script option handling:zwelch1-22/+39
- Move AC_ARG_ENABLE for secondary parallel port options: - These macros cause their configure options to appear unconditionally, so they should not be placed inside conditional logic. - Groups them with primary parallel port driver option. - Update these options to show '-' instead of '_'; both still work. - Update command help text to show host architecture/OS requirements. - Display a warning when these options have been provided and the configure script will ignore the setting that the user specified. git-svn-id: svn://svn.berlios.de/openocd/trunk@2104 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-08Finish off the dummy minidriver integration:zwelch1-12/+43
- Try to disambiguates minidriver options from "standard" driver options. - Make minidummy symbols more explict about being a minidriver. - Move minidummy.c into minidummy directory to put it with its header. In configure.in: - Improve configuration option to allow new minidriver implementations: - Change option from --enable-minidummy to --enable-minidriver-dummy. - Move it to the end of the list of options. - Provides a clear pattern for future minidrivers. - Update handling of HAVE_JTAG_MINIDRIVER_H: - Check for external jtag_minidriver.h only with --enable-ecosboard. - Otherwise, define it when --enable-minidriver-dummy is provided. - Add check to ensure only one minidriver is enabled. - When a minidriver is enabled, warn user that standard drivers are not built. - Use proper AC_DEFINE semantics with MINIDRIVER_DUMMY. In src/jtag/Makefile.am: - Restructure handling of minidummy source files. - Include minidummy driver header in the distribution. In src/jtag/jtag.c: - Restructure preprocessor logic to include: - only one minidriver, or - all configured standard drivers. git-svn-id: svn://svn.berlios.de/openocd/trunk@2102 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-07minidriver build test driver "minidriver"oharboe1-0/+11
git-svn-id: svn://svn.berlios.de/openocd/trunk@2092 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03catchup with jtag refactoring.oharboe1-1/+0
git-svn-id: svn://svn.berlios.de/openocd/trunk@2031 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-02Only include jtag_driver.c in the build when minidriver is not in use.zwelch1-1/+2
git-svn-id: svn://svn.berlios.de/openocd/trunk@2000 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-02Add high-speed device support in FT2232 driver:zwelch1-0/+30
- Initial support for FT2232H/FT4232H devices from FTDI. - Add --enable-ftd2xx-highspeed option to configure script. - Original patch submitted by Joern Kaipf <lists@joernline.de>. git-svn-id: svn://svn.berlios.de/openocd/trunk@1998 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27Move TCL script files -- Step 1 of 2:zwelch1-0/+1
- Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-13Update configure script test for net/if.h to work on MacOS.zwelch1-1/+15
git-svn-id: svn://svn.berlios.de/openocd/trunk@1781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-12Make replacements.h private by including it from config.h autoheader.zwelch1-0/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@1760 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-12Make system.h private by including it from config.h autoheader.zwelch1-0/+4
git-svn-id: svn://svn.berlios.de/openocd/trunk@1759 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-12Define _GNU_SOURCE in config.h, remove definitions from source files.zwelch1-0/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@1757 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-11Update jim helper files to use proper configure script support:zwelch1-0/+4
- configure.in: Add AC_TYPE_LONG_LONG_INT to detect 'long long int' support. - configure.in: Add AC_C_CONST to provide equivalent support as jim.h. - jim*.c: include config.h when HAVE_CONFIG_H is defined. - jim*.{h,c}: use HAVE_LONG_LONG_INT definition from config.h. - jim.h: Remove hard-coded const and HAVE_LONG_LONG definitions. - jim.h: -DJIM_NO_CONST has been obsoleted; -Dconst is equivalent. git-svn-id: svn://svn.berlios.de/openocd/trunk@1744 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-11Add remaining header checks to be used in subsequent patches.zwelch1-0/+7
git-svn-id: svn://svn.berlios.de/openocd/trunk@1704 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-11Add --enable-malloc-logging configure option and update log.c to match.zwelch1-0/+13
git-svn-id: svn://svn.berlios.de/openocd/trunk@1703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-11Factor system #includes out of replacements.h into new system.h.zwelch1-1/+6
git-svn-id: svn://svn.berlios.de/openocd/trunk@1702 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-11Add configure check for sys/types.h; include in our types.h.zwelch1-0/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@1699 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.1 at 2024-11-01 17:10:17 +0000