aboutsummaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)AuthorFilesLines
2016-12-25jimtcl: update to 0.77, the current version, enable only specific modulesPaul Fertser1-1/+1
This is needed to fix build on aarch64 to get updated config.guess. Because some newer JimTcl modules that get enabled are failing to build on some of the platforms OpenOCD supports, enable only a fixed set that shouldn't cause any issues. We also disable running Jim Tcl tests on distcheck because they never worked (before 85358e479e5bbf295a5aaf743f3c29a5e1a4fd1c Jim commit) but didn't break Jenkins build; with newer version they're getting run and fail due to limited permissions for filesystem and networking operations. Change-Id: I0b6c6a00bf2cf0902bbb01c9c0224fe93c74ac94 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3700 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-08configure: Fail on enabling sysfsgpio on non-linux OSAndreas Fritiofson1-0/+8
Change-Id: I5036d8eca6a6e6ed47e3b9ff78bc3a3bf34491fb Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3888 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Deprecate ZY1000, ioutils and oocd_traceAndreas Fritiofson1-0/+23
These have not been maintained for a very long time so I say it's time we remove them. Change-Id: Ic091978d734be09347e271736df0f7f7f9095243 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3885 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: De-duplicate code in AC_CHECK_HEADERSAndreas Fritiofson1-57/+1
Combine all checks that have the same required includes. Change-Id: I9b4567766e037922c2ffb737f32e9c12af43bf0e Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3884 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Convert to non-recursive makeAndreas Fritiofson1-19/+0
Change-Id: I11f8bc8553957e2ff083c09e72e16881e4d3bb6f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3865 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Consolidate platform definesAndreas Fritiofson1-16/+20
Change-Id: Iebc775baadeeb5e963fb48c0a9e8d87d26d9035a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3863 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Don't set user variablesAndreas Fritiofson1-2/+2
CFLAGS is a user variable and shouldn't be set in either configure.ac or Makefile.am because that makes it impossible to override compiler flags at configure or make time. AC_SUBST the default warning flags into AM_CFLAGS instead, which is emitted before CFLAGS on the compiler command line. Do the same thing with a mingw-specific flag as well. Change-Id: I6ac3a3c8b7e0abf6f0e60ea239b549d68ea6d370 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3870 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Add USE_* conditionals for hidapi and libjaylinkAndreas Fritiofson1-0/+2
For consistency with other libs. Change-Id: Id37329a00db5ab668f4c2c9ce53d2c41976649b1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3869 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Use same case for libjaylink as for other libsAndreas Fritiofson1-3/+3
Change-Id: I60d91a0543d9b8c580254cdc5f04b2e60209b98b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3868 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Replace shell constructs with M4sh macrosAndreas Fritiofson1-211/+198
AS_IF and AS_CASE should be used instead of if and case to properly handle macros in conditional branches. Also guard all tests against empty variables and embedded spaces which makes it possible to remove some variable defaults. Change-Id: Ib675177690d406a80ee98dd5d105296a7cdc7b8a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3669 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Remove unused BUILD_BITQ and BUILD_BITBANG defineAndreas Fritiofson1-12/+0
Change-Id: Ibfb5e414dd77d2ce4b835007722eb18da3820f3a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3668 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Remove conflicting CMSIS_DAP conditionalAndreas Fritiofson1-1/+0
It's already defined by PROCESS_ADAPTERS. Change-Id: I3bbcb0f77c645e9c5a98c2d5069c178358d1516b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3239 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Detect libftdi using pkgconfigAndreas Fritiofson1-109/+26
Auto-enable libftdi adapter drivers if found, just like libusb and hidapi based adapters. Change-Id: I71a10c90c8b999c4cae9b4f8fb5e97971d03083b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3238 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jtag/drivers/openjtag: Add support for Cypress CY7C65215Vianney le Clément de Saint-Marcq1-0/+7
The Cypress CY7C65215 Dual Channel USB-Serial Bridge Controller [1] understands the OpenJTAG protocol over a proprietary USB interface. This patch adds support for the CY7C65215 to the openjtag interface driver. A new configuration option, `openjtag_variant`, allows to select the transport to use. Libusb (1.x or 0.1) is now a hard dependency of the openjtag driver. This should not be a big issue as libftdi also depends on it. [1] http://www.cypress.com/?rID=82870 Change-Id: I55ffb3fd9e006eb311e405d9fb836bb119644bfd Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: http://openocd.zylin.com/2805 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-06Remove support for the GPL incompatible FTDI D2XX libraryAndreas Fritiofson1-343/+21
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi only. Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3237 Tested-by: jenkins Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06Remove since long deprecated ft2232 driverAndreas Fritiofson1-91/+6
Purge all legacy interface configurations so there's no more confusion over which one to use. Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just duplicates what INSTALL says. Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3236 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-05Fix autogen.sh invocation of libjaylinkMarc Schink1-1/+0
Move autogen.sh invocation of libjaylink from the configure to the bootstrap script because the configure script is included in tarball releases but autotools are not required to be available on end-user machines. Thanks to Paul Fertser for spotting this. Change-Id: I5489ae83885157a01803eed51a7328e47d67ea6d Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3569 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05configure.ac: Fix J-Link adapter descriptionMarc Schink1-1/+1
The J-Link driver is not JTAG only and the correct spelling of the company is "SEGGER". Change-Id: Ic1062247d3bf0d564960f1ac6dfc86ffb34593e0 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3530 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05configure.ac: Fix libjaylink integrationMarc Schink1-20/+18
Do not configure internal libjaylink if libusb-1.0 is not available or if J-Link driver is disabled (--disable-jlink). Change-Id: I021bca91dbbc33888a997c664f7836225306c3ef Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3528 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-05-21configure.ac: support MSYS with newer config.guessPaul Fertser1-1/+1
Upstream commit http://git.savannah.gnu.org/gitweb/?p=config.git;a=commitdiff;h=f4ebd3ed097771a729b68e688236aea665e7c1f3 makes both i386 and amd64 MSYS (and MSYS2) systems be detected as *-pc-msys . With this patch OpenOCD builds without any additional tweaks on MSYS2 with the latest config.guess. Change-Id: I1ae4154f76125a84078926b425fa989904639ce0 Reported-by: "Stevens, Kelly E. M." <Kelly.Stevens@gtri.gatech.edu> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3468 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05ftdi: make ftdi_location command depend on libusb1 versionMatthias Welwarsky1-0/+2
The function libusb_get_port_numbers(), required for the command ftdi_location, is only available in recent version of libusb1. Compilation will break if the function is not available. This patch enables the command only if libusb1 contains the necessary function. Change-Id: I091e72dafa4ed22eea51692751d43246a8152987 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3396 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-26Improve J-Link driver and introduce libjaylink.Marc Schink1-2/+29
This patch uses libjaylink which is a library to access J-Link devices. As other tools which are not in the scope of OpenOCD also need to access J-Link devices a library is used. A firmware upgrade tool and an advanced configuration tool for J-Link devices are under development. Further versions of libjaylink will support additional features OpenOCD could benefit from. This includes TCP/IP as additional possibility to connect to J-Link devices as well as power tracing and device internal communication. The latter is used to access peripherals on some development boards (e.g EFM32 STK and DVK). Integration of libjaylink is realized with a git submodule like jimtcl. As libjaylink depends on libusb-1.0 only, no additional dependency is introduced for OpenOCD. All low-level JTAG and SWD implementations of the current driver are left untouched and therefore no incompabilities are to be expected. Improvements of this patch: * Support for more USB Product IDs, including those with the new scheme (0x10xx). The corresponding udev rules are also updated. * Device selection with serial number and USB address. * Adaptive clocking is now correctly implemented and only usable for devices with the corresponding capability. * The target power supply can now be switched without the need for changing configuration and power cycling the device. * Device configuration is more restrictive and only allowed if the required capabilities are available. * Device configuration now shows the changes between the current configuration of the device and the values that will be applied. * Device configuration is verified after it is written to the device exactly as the vendor software does. * Connection registration is now handled properly and checks if the maximum number of connections on a device is reached. This is also necessary for devices which are attached via USB to OpenOCD as some device models also support connections on TCP/IP. * Serial Wire Output (SWO) can now be captured. This feature is not documented by SEGGER however it is completely supported by libjaylink. This patch and libjaylink were tested on Ubuntu 14.04 (i386), Debian 7 (amd64), FreeBSD 10.0 (amd64) and Windows XP SP3 (32-bit) with the following device and target configurations: * JTAG: J-Link v8.0, v9.0 and v9.3 with AT91SAM7S256 * SWD: SiLabs EFM32 STK 3700 (EFM32GG990F1024) * SWD: J-Link v8.0, v9.0 and v9.3 with EFM32GG990F1024 * SWD: XMC 2Go (XMC1100) * SWD: XMC1100 Boot Kit (XMC1100) * SWD: IAR Systems / Olimex Eval Board (LPC1343F) * SWD: Nordic Semiconductor nRF51 Dongle (nRF51422) * SWD: SiLabs EZR32 WSTK 6220A (EZR32WG330FG60G) Except for Windows XP all builds are tested with Clang in addition to GCC. This patch and libjaylink are not tested on OSX yet. Change-Id: I8476c57d37c6091c4b892b183da682c548ca1786 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2598 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-03Change from sys/poll.h to standard poll.h locationPaul Fertser1-1/+1
According to "man 2 poll" the correct header to include is poll.h, not sys/poll.h. Reported by a build against musl. Change-Id: I5298b49dc947d1a368e423104c0c0c7b9bdd1a10 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2947 Tested-by: jenkins
2015-05-18Restore normal development cyclePaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-05-18The openocd-0.9.0 releasePaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-04-24Restore -dev suffixPaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-04-24The openocd-0.9.0-rc1 release candidatePaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-02-04configure: define WIN32_LEAN_AND_MEAN early to make it effectivePaul Fertser1-0/+4
This macro makes windows builds faster and helps with the old "#define interface struct" issue as the word "interface" is part of libusb-0.1 API. However, defining it in replacements.h is too late, as windows.h gets included by that time from somewhere else. This solution is provided by Ray Donnelly from the MSYS2 team. Change-Id: I376a5fb3d106786515d7e1ba44dbd751e4dcdb1b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2486 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-16build: make makeinfo optionalSpencer Oliver1-0/+8
This means the user does not have to install texinfo to build OpenOCD. Change-Id: Id9f42da798d3c2b79e95214c9e2559cf32802251 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2325 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-02Provide od+sed replacement for the bin2char helperPaul Fertser1-41/+0
Using custom build-time tools is always more problematic, especially for cross-compiling. This alternative implementation assumes "od" (IEEE Std 1003.1-2001) and sed are available which should be the case for any reasonably modern system. Change-Id: I0208f475648c78e7dca127ff4bab60d314b2bf53 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2139 Tested-by: jenkins Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-03vsllink: Port to libusb-1.0 APIFatih Aşıcı1-3/+3
Change-Id: I8a9a4dace8e7e8152947094b27b86f9a0d90fa61 Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com> Reviewed-on: http://openocd.zylin.com/1952 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-22configure: fix formatting when "echo -n" is not supportedPaul Fertser1-4/+4
The -n option is non-standard and is unavailable on some systems (e.g. OS X's shell builtin). Change-Id: Ia2fed186dee5fa6da543944873d67ebee1d9354e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2172 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-31configure.ac: correct test for USB_BLASTER_DRIVER AM symbolPaul Fertser1-1/+1
Blaster II should depend on the corresponding symbol, not on libusb-1 presence. Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2159 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-27Restore normal development cyclePaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-27The openocd-0.8.0 releasePaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15Restore -dev suffixPaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15The openocd-0.8.0-rc2 release candidatePaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-14configure: presto ftdi driver requires libftdiPaul Fertser1-1/+1
Change-Id: I4b04eec5084d4b8129e2aff8f3411c6d92e84431 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2101 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-03-30Restore -dev suffixPaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-03-30The openocd-0.8.0-rc1 release candidatePaul Fertser1-1/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-03-28ft2232: Mark interface driver as deprecatedAndreas Fritiofson1-4/+25
Change-Id: I5ebc924ab66c86f1902942bebc203a34d97abc64 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1899 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-20jtag/drivers: add USB-Blaster IIFranck Jullien1-2/+3
This patchs adds a new access driver for the existing USB-Blaster interface driver. This interface (as it is build-in on the sockit development board) is composed of a Cypress EZ-USB plus a CPLD. The Cypress chip as an embedded 8051 microcontroller. When it's powered up, the firmware is downloaded to the chip then the device is disconnected and reconnected with the new firmware. The USB-Blaster II protocol is almost identicial to the old one. The only difference is that you need to send a 0x5F before read TDO back. This command seems to copy TDO buffer datas to the endpoint buffer. Driver will be auto enabled if libusb-1.0 is detected. Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1791 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver1-3/+17
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2013-12-22build: remove hard coded ftdi and usb librariesMathias K1-4/+15
This patch remove the hardcoded libraries. Also a check for libftdi1 installations was added. This check fix an issue with gentoo and maybe other systems. Change-Id: Ieff9ec4d66ee0f3e6b22261a10e4cab9f26b6b51 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1759 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-21Fix ULINK driver dependencies in configure.acMartin Schmölzer1-2/+2
Commit dd6274deed65c47ba2ef46e14259167d393399d8 (see http://openocd.zylin.com/#/c/1475/ for futher information) adds the wrong libusb dependency for the ULINK driver (libusb-0.1), when in fact the ULINK driver uses the libusb-1.0 API since commit f684252b2530d86f3a8330940105b86c770231f1. Change-Id: I6946f1fdc0e26bfc7bdcff27a721e05a05b464a5 Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at> Reviewed-on: http://openocd.zylin.com/1699 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-26Add new target type: OpenRISCFranck Jullien1-0/+1
Add support for OpenRISC target. This implementation supports the adv_debug_sys debug unit core. The mohor dbg_if is not supported. Support for mohor TAP core and Altera Virtual JTAG core are also provided. Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1547 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-26Require Autoconf >= 2.64Paul Fertser1-1/+1
m4_argn macro was introduced in v2.63b-34-g46e87de on the 22nd of Apr 2009. Change-Id: Id01cc9f0ffdb46cf6dfd26c3bf3b5efa0ddd2984 Reported-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1656 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-16configure: expand library search for libftd2xxStephan Linz1-1/+1
Error was: checking for library containing FT_GetLibraryVersion... no configure: error: You appear to be missing the FTD2xx driver library. Reason were two cases: Case one: The FTD2xx library uses clock_gettime() and in normal cases the linker will find the function in the libc library. Most (older) systems require the program be linked with the librt library to use these (see man clock_gettime: Link with -lrt). Case two: You can rebuild the FTD2xx library (relink from the object files) against the primary (system wide installed) libusb-1.0. So you avoid mixed code (GPL with proprietary code) in the FTD2xx library. In this case, the FTD2xx library provides no private (linked in) libusb-1.0 functionality and require the program be linked with the libftd2xx __AND__ the libusb-1.0 to resolve all the libusb-1.0 symbols. Change-Id: Iaf9a35ab4257e37b98dccd47667378ad2a64b7ed Signed-off-by: Stephan Linz <linz@li-pro.net> Reviewed-on: http://openocd.zylin.com/1614 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-13configure: Add libusb-1.0 header bug workaroundAndreas Fritiofson1-0/+2
Force the libusb-1.0 include dir to be treated as a system include path which suppresses the cast-align warnings otherwise failing the build on some platforms. Change-Id: I738cfd793052b8772731d2feeef968ee893bd4bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1534 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13configure: auto-enable USB adapters based on libusb availabilityPaul Fertser1-160/+89
This unifies the way the USB adapters are handled, and enables them automatically whenever possible (until explicitly disabled). If an adapter is explicitly enabled but can't be built, abort the configure. Also add infrastructure for generic handling of adapter drivers in configure and print a summary of the configuration results after finishing. The m4 quoting is as conservative as I could get it, and seems appropriate. Change-Id: I1655691e5ea0d8eb9e3f67830b96992ffe33640a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1475 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.1 at 2024-09-18 08:39:29 +0000