aboutsummaryrefslogtreecommitdiff
path: root/NEWS
AgeCommit message (Collapse)AuthorFilesLines
2021-02-11From upstream (#580)Tim Newsome1-1/+1
* configure: do not make Capstone dependency automagic This adds regular ./configure options to control dependency on the Capstone disassembly engine. See [0] for the rationale. [0] https://wiki.gentoo.org/wiki/Project:Quality_Assurance/Automagic_dependencies Change-Id: I3e16dc5255d650aa1949ccf896b26dc96e522a75 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/5985 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * configure.ac: fix build with libusb0 and without libusb1 Driver 'openjtag' requires both libftdi and libusb1. The current check is incorrect and the driver is built when libftdi is present with libusb0 and without libusb1, which causes the linker to fail resolving the required libusb1 symbols. Remove the check for libusb0 on driver 'openjtag'. Create a new adapters group LIBFTDI_USB1_ADAPTERS to hold the driver 'openjtag'. Change-Id: I1f5e554b519e51c829d116ede894639cb55a26aa Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5989 Tested-by: jenkins * doc: fix over/underfull hboxes in PDF This adds some cosmetic changes to make the PDF User Manual look proper. Building it now requires Texinfo 5.0 which shouldn't be problematic according to [0]. Commit 79fdeb37f486f74658f1eaf658abac8efb3eba6a is effectively reverted. [0] https://repology.org/project/texinfo/versions Change-Id: I990bc23bdb53d24c302b26d74fd770ea738e4096 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/5995 Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * contrib: rpc_examples: haskell: fix ftbs with current libraries And get rid of some warnings along the way. Change-Id: I8fdbe1fa304276be6b0f25249b902b3576aa3793 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/5987 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * Makefile.am: fix override of target 'check-recursive' To prevent executing the Jim Tcl tests, the makefile's target 'check-recursive' has been overridden in commit 56d163ce7951 ("jimtcl: update to 0.77, the current version, enable only specific modules"). This causes a runtime warning during build: Makefile:6332: warning: overriding recipe for target 'check-recursive' Makefile:5098: warning: ignoring old recipe for target 'check-recursive' Instead of override the makefile's target 'check-recursive', prevent the recursion by re-assigning as empty the variable SUBDIRS for this specific target only. Change-Id: I03d1c467eba42316a59aeed4612d6bdbe6211282 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: 56d163ce7951 ("jimtcl: update to 0.77, the current version, enable only specific modules") Reviewed-on: http://openocd.zylin.com/5986 Tested-by: jenkins * contrib: udev file for Cypress SuperSpeed Explorer kit lsusb output: Bus 003 Device 011: ID 04b4:0007 Cypress Semiconductor Corp. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x04b4 Cypress Semiconductor Corp. idProduct 0x0007 bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 114 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x00 bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 4 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 5 bInterfaceProtocol 0 iInterface 0 Change-Id: I62f0300199da3551c8774a4a5a4cd106a3ab2904 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/3611 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target: fix memory leak on multiple '-gdb-port' flag In the odd case of multiple flags '-gdb-port' during 'target create' or following 'configure', the new strdup()'ed value will replace the old one without freeing it. Free the old value (if it exists) before replacing it. Change-Id: I1673346613ce7023880046e3a9ba473e75f18b8a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6005 Tested-by: jenkins * udev: fix permission for Ambiq Micro EVK's Commit 68e204f1e91a ("udev: Add rules for Ambiq Micro EVK's.") was initially proposed as http://openocd.zylin.com/3429/ then replaced by http://openocd.zylin.com/3980/ The initial proposal was for file '99-openocd.rules', in which MODE="664" was the norm. After merge of http://openocd.zylin.com/2804/ the new udev rules in '60-openocd.rules' switched to MODE="660", but the evolution of the above patch missed this change. Switch udev rules of Ambiq Micro EVK's to MODE="660" and uniform them to the rest of the file. Change-Id: I4b4eea535184ee8569da3264bff4f1fafb5bce4d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: 68e204f1e91a ("udev: Add rules for Ambiq Micro EVK's.") Reviewed-on: http://openocd.zylin.com/6004 Tested-by: jenkins * doc/style: fix doxygen error Doxygen complains about non-closed nested comments: doc/manual/style.txt:423: warning: Reached end of file while still inside a (nested) comment. Nesting level 1 (probable line reference: 149) This is caused by the string '/**' that is interpreted as the beginning of a comment. Escape the string to not let doxygen consider it as a comment While there, replace @code/@endcode with @verbatim/@endverbatim to properly render the line. Change-Id: If2a27c4cf659326e317cc4ac8c0b313e97e40432 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5996 Tested-by: jenkins * flash/nor/max32xxx: fix path of include file The relative path should have three times '..'. Issue identified by doxygen: src/flash/nor/max32xxx.c:85: warning: include file ../../contrib/loaders/flash/max32xxx/max32xxx.inc not found, perhaps you forgot to add its directory to INCLUDE_PATH? Change-Id: Ie7b4948c6770b8acb9eff26e08eea32945ebb219 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5997 Tested-by: jenkins * Doxyfile.in: fix build out-of-tree When doxygen is built out-of-tree, it fails to find the generated file startup_tcl.inc: src/openocd.c:59: warning: include file startup_tcl.inc not found, perhaps you forgot to add its directory to INCLUDE_PATH? Add '@builddir@/src' to INCLUDE_PATH. Change-Id: I51f2f6fe7224bba0f8b3db7219f9831de4e67139 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5998 Tested-by: jenkins * doc/manual/primer/jtag.txt: remove duplicated section name The section name 'primerjtag' is used twice, causing doxygen to complain: warning: multiple use of section label 'primerjtag', (first occurrence: doc/manual/primer/jtag.txt, line 107) Rename one of them. Change-Id: Id307915dbc51a7f647fab4fb28ab431e65344d61 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5999 Tested-by: jenkins * Doxyfile.in: exclude libjaylink from doxygen When build using libjaylink as git submodule, doxygen includes the libjaylink files and complains for multiple 'mainpage' comment block, one in OpenOCD and the other in libjaylink: src/jtag/drivers/libjaylink/libjaylink/core.c:37: warning: found more than one \mainpage comment block! (first occurrence: doc/manual/main.txt, line 1), Skipping current block! Exclude libjaylink submodule from doxygen. Change-Id: I5e856817344c9f21f8c26f077a23c00b83cfbcb5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6000 Tested-by: jenkins * openocd: fix incorrect doxygen comments Use '@param' in front of function's parameters and '@a' when the parameter is recalled in the description. This fixes doxygen complains: warning: Found unknown command '@buff16' While there, fix a minor typo s/occured/occurred/ in a comment and the typo s/@apram/@param/ in a doxygen comment. Change-Id: I5cd86a80adef552331310a21c55ec5d11354be21 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6001 Tested-by: jenkins * openocd: fix doxygen parameters of functions Add to doxygen comment the missing parameters. Remove from doxygen comment any non-existing parameter. Fix the parameter names in doxygen comment to match the one in the function prototype. Where the parameter name in the doxygen description seems better than the one in the code, change the code. Escape the character '<' to prevent doxygen to interpret it as an xml tag. Change-Id: I22da723339ac7d7a7a64ac4c1cc4336e2416c2cc Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6002 Tested-by: jenkins * doc/manual/primer/autotools.txt: fix doxygen warning Commit ab90b8777855 ("configure: remove AM_MAINTAINER_MODE, effectively always enabling all the rules") removes the configure flag '--enable-maintainer-mode' and its documentation, but have left a reference to the removed subsection 'primermaintainermode' and this triggers a warning in doxygen: doc/manual/primer/autotools.txt:21: warning: unable to resolve reference to 'primermaintainermode' for \ref command Remove the obsoleted paragraph. Change-Id: I56e69ef033d546d159745bed1b47c6105827e7ae Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: ab90b8777855 ("configure: remove AM_MAINTAINER_MODE, effectively always enabling all the rules") Reviewed-on: http://openocd.zylin.com/6003 Tested-by: jenkins * flash/stmqspi: fix build error with -Werror=maybe-uninitialized using gcc 9.3 on ubuntu focal fossa with -Werror=maybe-uninitialized we get this error: /src/flash/nor/stmqspi.c: In function ‘read_flash_id’: /src/flash/nor/stmqspi.c:1948:6: error: ‘retval’ may be used uninitialized Change-Id: Ifd8ae60df847fc61e22ca100c008e3914c9af79b Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com> Reviewed-on: http://openocd.zylin.com/6012 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * target/riscv: fix build error with -Werror=maybe-uninitialized using gcc 9.3 on ubuntu focal fossa with -Werror=maybe-uninitialized we get this error: /src/target/riscv/riscv.c: In function ‘riscv_address_translate’: /src/target/riscv/riscv.c:1536:13: error: ‘pte’ may be used uninitialized Change-Id: I51e180b43f9b6996e4e4058db49c179b9f81bcdc Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com> Reviewed-on: http://openocd.zylin.com/6013 Tested-by: jenkins Reviewed-by: Tim Newsome <tim@sifive.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * cortex_m: [FIX] ARMv8-M does not support VECTRESET ref: Arm®v8-M Architecture Reference Manual (DDI0553B.m) D1.2.3: AIRCR, Application Interrupt and Reset Control Register Bit [0] is RES0 Change-Id: I6ef451b2c114487e2732852a60e86c292ffa6a50 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com> Reviewed-on: http://openocd.zylin.com/6014 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * driver/ftdi: skip trst in swd mode When using the adapter olimex arm-jtag-swd (to convert to SWD a JTAG-only FTDI adapter), the pin trst on JTAG side is re-used to control the direction of pin SWDIO on SWD side. There is a single reset API at adapter driver to assert/deassert either srst and/or trst. A request to assert/deassert srst can cause also trst to change value, hanging the SWD communication. In SWD mode, ignore the value passed to trst. Change-Id: I5fe1eed851177d405d77ae6079da9642dc1a08f1 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6006 Tested-by: jenkins * configure.ac: drop macro 'AC_PROG_CC_C99' from autoconf 2.70 The macro AC_PROG_CC_C99 has been obsoleted by autoconf 2.70 and triggers a set of warnings from both 'aclocal' and 'autoconf'. The test of AC_PROG_CC_C99 is now included in AC_PROG_CC. For autoconf 2.69 and earlier the macro is still required, so cannot be simply dropped. Use a conditional test to avoid the warning on autoconf 2.70 but still use AC_PROG_CC_C99 on older autoconf. Change-Id: I5e8437f5a826fb63be6d07bcb5bb824f94683020 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6009 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> * configure: drop macro 'AC_HEADER_TIME' The macro AC_HEADER_TIME has been obsoleted by autoconf 2.70. Not all systems provide 'sys/time.h', plus some old system didn't allowed to include both 'time.h' and 'sys/time.h' because 'time.h' was included by 'sys/time.h' and was not properly protected to allow multiple inclusion. The macro AC_HEADER_TIME helps to detect such odd case. Nowadays all the systems properly protect 'time.h', so its safe to unconditionally include 'time.h', even if it is also included by 'sys/time.h'. The case of systems without 'sys/time.h' is already covered by configure.ac through the directive AC_CHECK_HEADERS([sys/time.h]) Remove the obsoleted autoconf macro and simplify the code by including 'time.h' unconditionally and check HAVE_SYS_TIME_H to include 'sys/time.h'. Change-Id: Iddb3f3f1d90c22668b97f8e756e1b4f733367a7d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6010 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> * README.macOS: explain how to install suitable Texinfo Change-Id: Ic5906111f412eebd906a9be3fd0e133484def3eb Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/6026 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * jlink: fix device discovery when network is off If user specifies a serial number for the jlink device, openocd extends the search to network jlink devices too, without checking if the host has a valid and functional network connection. If the network is not functional, libjaylink returns error. This error invalidates the discovery on USB, even if it was successful. Factor-out parts of the jlink_init into separate jlink_open_device function, use that function to firstly discover and match USB devices and, if matching device was not found on the USB bus and serial number was specified, repeat discovery and matching via TCP. Fixes: https://sourceforge.net/p/openocd/tickets/294/ Change-Id: Iea0de1640d4e5b21ecc7e9c1dd6d36f214d647c2 Signed-off-by: Bohdan Tymkiv <bohdan200@gmail.com> Reviewed-on: http://openocd.zylin.com/6025 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> * README: add missing items for 0.11 JTAG adapters Cadence DPI, Cypress Kitpro, FTDI FT232R, Linux GPIOD, Mellanox rshim, Nuvoton Nu-Link, Nu-Link2, NXP IMX GPIO, Remote Bitbang, TI XDS110, Xilinx XVC/PCIe Debug targets AArch64, Cortex-M (ARMv8-M), ARCv2, MIPS64, RISC-V, ST-STM8 Flash Drivers ATmega128RFA1, Atmel SAM, eSi-RISC, EZR32HG, MAX32, MXC, nRF52, PSoC6, Renesas RPC HF and SH QSPI, SiFive Freedom E, ST BlueNRG, STM32 QUAD/OCTO-SPI for Flash/FRAM/EEPROM, SWM050, TI CC13xx, TI CC26xx, TI CC32xx, TI MSP432, Winner Micro w600, Xilinx XCF Change-Id: I341618ac5d7189e4f98268cecd66c99447b72af8 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com> Reviewed-on: http://openocd.zylin.com/6027 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com> * The openocd-0.11.0-rc2 release candidate Signed-off-by: Paul Fertser <fercerpav@gmail.com> * Restore +dev suffix Signed-off-by: Paul Fertser <fercerpav@gmail.com> * steppenprobe: fix file permission Commit 895d4a599585 ("tcl/interface/ftdi: Add Steppenprobe open hardware interface") erroneously set the execution permission to the configuration file. Strip the execution permission. Change-Id: I556451d5e6fee4aee385451e8c90216a25b6ef46 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: http://openocd.zylin.com/5653 Reviewed-on: http://openocd.zylin.com/6038 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Paul Fertser <fercerpav@gmail.com> * github: fix github wokflow while pushing a tag this fix permits to add correctly the generated artifact (windows binaries) into the release section. Change-Id: Ia982370d3a1e08c623ebcabb5ac97e9fb49d00e0 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6047 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * doc: Fix type in Hooking up the JTAG Adapter We are talking about adapter connectivity in this chapter. It should be "dongles" instead of "cables". Change-Id: I7bd4307765517375caa2af86dfc929d0ef66c3e6 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: http://openocd.zylin.com/6040 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins * doc/manual: Fix @subpage handling The subpage "thelist" used to have a title "Pending and Open Tasks" but the commit c41db358a0100ab changed it to "The List". With @subpage, it now renders: "The List of The List enumerates opportunities for" instead of "The List of Pending and Open Tasks enumerates opportunities for" This commit fix it to "The List enumerates opportunities for" Change-Id: Ifee0dcd9b3c9f7e651a8748a7afda99eedea3c5c Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: http://openocd.zylin.com/6041 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> * doc/manual: Fix function name typo We have both the singular form, register_command(), and the plural form register_commands(). Change-Id: I905ea83988b8ac70dd809b02d53b646aa4d66697 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: http://openocd.zylin.com/6042 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Co-authored-by: Paul Fertser <fercerpav@gmail.com> Co-authored-by: Antonio Borneo <borneo.antonio@gmail.com> Co-authored-by: Jiri Kastner <cz172638@gmail.com> Co-authored-by: Tarek BOCHKATI <tarek.bouchkati@st.com> Co-authored-by: Bohdan Tymkiv <bohdan200@gmail.com> Co-authored-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Co-authored-by: Yasushi SHOJI <yashi@spacecubics.com>
2020-12-09The openocd-0.11.0-rc1 release candidateAntonio Borneo1-1/+206
Change-Id: I111fec1304482f5c0f9d6ee988be8a2ea3de3981 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2017-01-23Restore normal development cyclePaul Fertser1-123/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2017-01-22NEWS: last pre-release changesPaul Fertser1-1/+1
Change-Id: I93203717f9096880298c10efebf05d59f888f34b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3954 Tested-by: jenkins
2017-01-15NEWS: mention SWO capture facility of the new J-Link driverPaul Fertser1-2/+2
Change-Id: I4fc150584f3f0c5df5c39ae512125b42893331f0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3948 Tested-by: jenkins
2016-12-25NEWS: prepare for new releasePaul Fertser1-1/+123
Change-Id: I141ff17f6dcab7e164a19c91b975ddd455d26dbc Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3854 Tested-by: jenkins
2015-05-18Restore normal development cyclePaul Fertser1-77/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-05-17NEWS: last pre-release changesPaul Fertser1-2/+2
Change-Id: Ibeb9078d19023b8cae5c0371079d5e4e1b5e3c57 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2776 Tested-by: jenkins
2015-04-24Add NEWS in preparation for the new releasePaul Fertser1-1/+77
Change-Id: I629158b59ff38f9b82a560f119a391bb97af43f2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2701 Tested-by: jenkins
2014-04-27Restore normal development cyclePaul Fertser1-79/+1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15NEWS: minor fixes for rc2Paul Fertser1-3/+3
Change-Id: Iba04baae4f3278db8b36283574a82c077d28bb4a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2113 Tested-by: jenkins
2014-03-29NEWS: add release highlightsPaul Fertser1-7/+89
Change-Id: Ifa4459b3b7b58b639d6c885a2ea88cefbfac2680 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1881 Tested-by: jenkins
2013-05-05Restore normal development cycleFreddie Chopin1-14/+0
1. Archive NEWS for 0.7.0 release 2. Add new blank NEWS file 3. Bump version to 0.8.0 and restore "-dev" suffix Change-Id: I21febc042faeed294f3beeb5e683535dbf011e8f Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-22Update NEWSSpencer Oliver1-0/+14
Change-Id: Icfc1245552a400232988cf44f54e5c46af1db873 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1356 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-09-07Restore -dev suffix, archive NEWS file, add new blank NEWS file - startFreddie Chopin1-25/+0
new cycle for version 0.7.0. Change-Id: I549bd815b62292ea4da6ed5c445c7c8a55521d9d Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Update NEWSFreddie Chopin1-0/+3
Added some missing items to NEWS file prior to final 0.6.0 release. Change-Id: I69255c85fa8f4b6f06eae7c56f78072e3ec2d6f8 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/784 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-21NEWS: add headline itemsSpencer Oliver1-0/+28
Change-Id: Ie78b0a171af76cf647deef501245caf54209d9f8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/639 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2011-08-09Archive and recreate NEWS file.Jean-Christophe PLAGNIOL-VILLARD1-54/+3
Archive released NEWS file as NEWS-0.5.0. Create new NEWS file from release script template.
2010-08-16two NEWS updatesDavid Brownell1-1/+3
Mention AVR32 AP7000 support. Clarify ARM semihosting update was for V7M (not ARM9 etc). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-07-17lm3s811-ek uses generic stellaris target configDavid Brownell1-0/+1
There's no point in an lm3s811-specific target file, so remove it in favor of the generic "stellaris.cfg". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-07-02initial "transport" frameworkDavid Brownell1-0/+3
This adds the guts of a transport framework with initialization, which should work with current JTAG-only configurations (tested with FT2232). Each debug adapter can declare the transports it supports, and exactly one transport is initialized. (with its commands) in any given OpenOCD session. * Define a new "struct transport with init hooks and a few "transport" subcommands to support it: "list" ... list the transports configured (just "jtag" for now) "select" ... makes the debug session use that transport "init" ... initializes the selected transport (internal) * "interface_transports" ... declares transports the current interface can support. (Some will do this from C code instead, when there are no hardware versioning (or other) issues to prevent it. Plus some FT2232 tweaks, including a few to streamline upcoming support for an SWD transport (initially for Luminary adapters). Eventually src/jtag should probably become src/transport, moving jtag-specific stuff to transport/jtag. Signed-off-by: David Brownell <db@helium.(none)>
2010-06-03NEWS: updatesSpencer Oliver1-0/+12
Add new features since 0.4.0 release. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-27jtag/tcl.c cleanup -- split out "adapter.c"David Brownell1-1/+2
Clean up the jtag/tcl.c file, which was one of the biggest and messiest ones in that directory. Do it by splitting out all the generic adapter commands to a separate "adapter.c" file (leaving the "tcl.c" file holding only JTAG utilities). Also rename the little-used "jtag interface" to "adapter_name", which should have been at least re-categorized earlier (it's not jtag-only). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-17SCRIPT: add add_script_search_dir cmdSpencer Oliver1-1/+9
Add a add_script_search_dir cmd so that adding search dir's can be added to cfg scripts. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-15rename jtag_nsrst_assert_width as adapter_nsrst_assert_widthDavid Brownell1-0/+1
Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15rename jtag_nsrst_delay as adapter_nsrst_delayDavid Brownell1-0/+1
Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15rename jtag_khz as adapter_khzDavid Brownell1-0/+5
Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. (We may want to update it to include a nag message too.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-11Add support for Bus Pirate as a JTAG adapter.Michal Demin1-0/+1
This includes a driver and matching config file. This support needs to be enabled through the initial "configure" (use "--enable-buspirate"). Signed-off-by: Michal Demin <michaldemin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-02LPC1768 updates, IAR board supportDavid Brownell1-0/+1
Fix some issues with the generic LPC1768 config file: - Handle the post-reset clock config: 4 MHz internal RC, no PLL. This affects flash and JTAG clocking. - Remove JTAG adapter config; they don't all support trst_and_srst - Remove the rest of the bogus "reset-init" event handler. - Allow explicit CCLK configuration, instead of assuming 12 MHz; some boards will use 100 Mhz (or the post-reset 4 MHz). - Simplify: rely on defaults for endianness and IR-Capture value - Update some comments too Build on those fixes to make a trivial config for the IAR LPC1768 kickstart board (by Olimex) start working. Also, add doxygen to the lpc2000 flash driver, primarily to note a configuration problem with driver: it wrongly assumes the core clock rate never changes. Configs that are safe for updating flash after "reset halt" will thus often be unsafe later ... e.g. for LPC1768, after switching to use PLL0 at 100 MHz. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27new "stellaris recover" commandDavid Brownell1-0/+6
Stellaris chips have a procedure for restoring the chip to what's effectively the "as-manufactured" state, with all the non-volatile memory erased. That includes all flash memory, plus things like the flash protection bits and various control words which can for example disable debugger access. clearly, this can be useful during development. Luminary/TI provides an MS-Windows utility to perform this procedure along with its Stellaris developer kits. Now OpenOCD users will no longer need to use that MS-Windows utility. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-21Open the merge window for the 0.5.0 release cycle.David Brownell1-68/+2
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-13NEWS: mention removal of obsolete commandsDavid Brownell1-0/+2
Removed remaining support for various commands, like advice for migrating old-style TAP declarations. The documentation no longer describes them either ... so if users have been delaying config updates, they may need to consult older releases. ALL this stuff has been clearly marked as "do not use" for at least a year now, so anyone still using it hasn't been holding up their end. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-22NEWS updatesDavid Brownell1-11/+15
Summarize most ARM11 and Cortex-A8 updates as "acting much more like other ARMs", and mention code sharing. Clarify a few other points, including support for "reset-assert" on all ARMs except Cortex-M (which doesn't exactly need it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-15NEWS: include s3c64xx NAND driverDavid Brownell1-0/+1
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-13NOR: add optional "flash erase_address" sector paddingDavid Brownell1-1/+3
Add a NOR flash mechanism where erase_address ranges can be padded out to sector boundaries, triggering a diagnostic: > flash erase_address 0x0001f980 16 address range 0x0001f980 .. 0x0001f98f is not sector-aligned Command handler execution failed in procedure 'flash' called at file "command.c", line 647 called at file "command.c", line 361 > > flash erase_address pad 0x0001f980 16 Adding extra erase range, 0x0001f800 to 0x0001f97f Adding extra erase range, 0x0001f990 to 0x0001fbff erased address 0x0001f980 (length 16) in 0.095975s (0.163 kb/s) > This addresses what would otherwise be something of a functional regression. An earlier version of the interface had a dangerous problem: it would silently erase data outside the range it was told to erase. Fixing that bug turned up some folk who relied on that unsafe behavior. (The classic problem with interface bugs!) Now they can get that behavior again. If they really need it, just specify "pad". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-13Cortex-M3: improved core exception handlingDavid Brownell1-0/+2
This updates three aspects of debugger/exception interactions: - Save the user's "vector_catch" setting, and restore it after reset. Previously, it was obliterated (rather annoyingly) each time. - Don't catch BusFault and HardFault exceptions unless the user says to do so. Target firmware may need to handle them. - Don't modify SHCSR to prevent escalating BusFault to HardFault. Target firmware may expect to handle it as a HardFault. Those simplifications fix several bugs. In one annoying case, OpenOCD would cause the target to lock up on ome faults which triggered after the debugger disconnected. NOTE: a known remaining issue is that OpenOCD can still leave DEMCR set after an otherwise-clean OpenOCD shutdown. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-08Coexist with quilt: rename PATCHES --> PATCHES.txtDavid Brownell1-1/+4
The issues is on Win32, which ignores case in filesystem and thus doesn't tolerate the quilt "patches" directory. Rename, and add "patches" to .gitignore so that developers can choose to use quilt for local patch management. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28Fix Luminary FT2232 layout docs/configsDavid Brownell1-0/+3
Most of this patch updates documentation and comments for various Luminary boards, supporting two bug fixes by helping to make sense of the current mess: - Recent rev C lm3s811 eval boards didn't work. They must use the ICDI layout, which sets up some signals that the older boards didn't need. This is actually safe and appropriate for *all* recent boards ... so just make "luminary.cfg" use the ICDI layout. - "luminary-lm3s811.cfg", was previously unusable! No VID/PID; and the wrong vendor string. Make it work, but reserve it for older boards where the ICDI layout is wrong. - Default the LM3748 eval board to "luminary.cfg", like the other boards. If someone uses an external JTAG adapter, all boards will use the same workaround (override that default). The difference between the two FT2232 layouts is that eventually the EVB layout will fail cleanly when asked to enable SWO trace, but the ICDI layout will as cleanly be able to enable it. Folk using "luminary.cfg" with Rev B boards won't see anything going wrong until SWO support is (someday) added. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26Driver for USB-JTAG, Altera USB-Blaster and compatiblesCatalin Patulea1-0/+1
The 10-pin JTAG layout used with these adapters is used by a variety of platforms including AVR. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-21Packaging fix, NEWS updateDavid Brownell1-0/+2
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-19ETM: add "etm trigger_debug" commandDavid Brownell1-0/+1
In conjunction with manual register setup, this lets the ETM trigger cause entry to debug state. It should make it easier to test and bugfix the ETM code, by enabling non-trace usage and isolating bugs specific to thef ETM support. (One current issue being that trace data collection using the ETB doesn't yet behave.) For example, many ARM9 cores with an ETM should be able to implement four more (simple) breakpoints and two more (simple) watchpoints than the EmbeddedICE supports. Or, they should be able to support complex breakpoints, incorporating ETM sequencer, counters, and/or subroutine entry/exit criteria int criteria used to trigger debug entry. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-19ETM trigger_percent becomes an ETB commandDavid Brownell1-0/+2
This command was misplaced; it's not generic to all traceport drivers, only the ETB supports this kind of configuration. So move it, and update the relevant documentation. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-19NEWS: mention libftdi 0.17David Brownell1-0/+2
2009-12-18NOR FLASH: only erase/unlock whole sectorsDavid Brownell1-0/+2
Much to my surprise, I observed a "flash erase_address ..." command erasing data which I said should not be erased. The issue turns out to be generic NOR flash code which was silently, and rather dangerously, morphing partial-sector references into unrequested whole-sector ones. This patch removes that low-level morphing. If desired, it can and should be done in higher level code. (We might need to fix some stuff in the GDB server code.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-04ARM11: basic watchpoint supportDavid Brownell1-0/+2
Use the DPM watchpoint support; remove old incomplete stubs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-03basic ARM semihosting supportNicolas Pitre1-0/+1
Semihosting enables code running on an ARM target to use the I/O facilities on the host computer. The target application must be linked against a library that forwards operation requests by using the SVC instruction that is trapped at the Supervisor Call vector by the debugger. The "hosted" library version provided with CodeSourcery's Sourcery G++ Lite for ARM EABI is one example. This is currently available for ARM9 processors, but any ARM variant should be able to support this with little additional work. Tested using binaries compiled with Sourcery G++ Lite 2009q1-161 and ARM RVCT 3.0. [dbrownell@users.sourceforge.net: doc tweaks, NEWS] Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-01Tcl and doc: update to match new 'arm mcr ...' etcDavid Brownell1-0/+2
Make them match the C code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-27NEWS: mention new reset-assert eventDavid Brownell1-0/+3
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-25NEWS updatesDavid Brownell1-0/+10
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-25update NEWS with recent developmentsZachary T Welch1-0/+17
Mention changes to flash bank command syntax, 'nand verify' command, command error handling and reporting, and help/usage command upgrades.
generated by cgit v1.1 at 2024-08-04 05:26:45 +0000