aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-07src/flash/nor/at91sam3|4l|7: fix clang static analyzer warningsTomas Vanek3-7/+4
Change-Id: I5cd2b2ebb2bd1980bdd1632b5c35bda9718a1089 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/5365 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-07flash/nor/stm32f1x: Group and cleanup device listMarc Schink1-37/+37
Group device list based on the device family and add clear device family names. Change-Id: I7a2dab1d1c0c8d141df02656c1964cb2c3fcbcd1 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5423 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-03drivers: Rename 'libusb1_common' to 'libusb_helper'Marc Schink14-43/+14
The name 'common' does not make sense anymore. While at it, remove some unnecessary #includes. Change-Id: If9798a5cce179438d89428a598d8ca05c8e5f20c Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5434 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-03drivers: libusb1_common code cleanupMarc Schink12-73/+50
Remove unncessary wrapper functions and 'jtag_' prefixes. Change-Id: I0fd866ff1e1cf7386c4d58a808dfda2c1c0a1518 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5433 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-03tcl/target: Drop old Renesas Gen2 SoC configsMarek Vasut3-90/+0
Drop old Renesas Gen2 SoC configurations, as they were superseded by the new unified config. Change-Id: I7c2ccbdc13b01a552ce9cafdc1538f226beaa9f2 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5399 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-03remove libusb0_common supportOleksij Rempel5-317/+3
Supporting two libusb versions provides additional development challenges without additional advantage. In most cases we need to patch libusb0_common and libusb1_common without real ability to test libusb0_common. Change-Id: Icbb19c6809b14533fe2acf7a877377b3be4cbd61 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/5432 Tested-by: jenkins
2020-03-02tcl/target: Switch Renesas R-Car Gen2 boards to new configMarek Vasut3-3/+6
Switch Renesas R-Car Gen2 boards which are currently supported from the old ad-hoc SoC configuration to the new unified configuration. Change-Id: I8a67bceb3ae92d840ae4dbac20868c75e83f7d58 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5398 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02tcl/target: Add unified config for Renesas R-Car Gen2 targetsMarek Vasut1-0/+123
Add configuration for the Renesas R-Car Generation 2 targets. These are SoCs with Cortex A15s and A7s. All cores currently supported by OpenOCD are supported here as well as two new cores, M2N and V2H, for the sake of support completeness. Change-Id: Ib6fe70a91360b4f8bd69822ee28b6dea530cfa0a Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5397 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02tcl/target: Abort on invalid SoC selection on R-Car Gen3Marek Vasut1-1/+1
Instead of printing error message and continue, abort on invalid SoC selection right away. Change-Id: I9c7a7111b590c6c49a0826562380b881a162a8dc Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5439 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-03-02flash/stm32h7x: add support of STM32H7Ax/H7Bx devicesTarek BOCHKATI3-102/+160
this new device has the following features: - single core cortex-M7 - 2MB flash - dual bank - page size 8k - write protection grouped by 4 sectors - write block size 128 bits (16 bytes) the bit definition of FLASH_CR is different than STM32H74x, that's why we introduced a helper to compute the FLASH_CR value Change-Id: I4da10cde8dd215b1b0f2645f0efdba9d198038d1 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5441 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-03-02Add support for SAMD21E17D deviceMichael Stoll1-0/+17
Change-Id: Id0a533f8899b20cc87e3a9143383ddf279c86301 Signed-off-by: Michael Stoll <michael.stoll@meadow-robotics.com> Reviewed-on: http://openocd.zylin.com/5458 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-29target/arc: fix clang static analyzer warningsEvgeniy Didin4-7/+14
Fixes: * Removed typo in *bitfields initializations. * Removed potentional memory leak allocating reg_data_type_struct_field/reg_data_type_flags_field objects. * Initialize buffers with "0" before usage in buf_set_u32(). * Removed memory leak in jim_arc_add_reg(). Change-Id: Iefde57cd4a48c4f3350c376475df8642607f52ff Signed-off-by: Evgeniy Didin <didin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5480 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-27Introduce ARCv2 architecture related codeEvgeniy Didin10-1/+3478
This patch is an initial bump of ARC-specific code which implements the ARCv2 target(EMSK board) initializing routine and some basic remote connection/load/continue functionality. Changes: 03.12.2019: -Add return value checks. -Using static code analizer next fixes were made: Mem leak in functions: arc_jtag_read_memory,arc_jtag_read_memory, arc_jtag_write_registers, arc_jtag_read_registers, jim_arc_add_reg_type_flags, jim_arc_add_reg_type_struct, arc_build_reg_cache, arc_mem_read. Dead code in "arc_mem_read"; In arc_save_context, arc_restore_context correct arguments in"memset" calls. In "build_bcr_reg_cache", "arc_build_reg_cache" check if list is not empty. 29.12.2019 -Moved code from arc_v2.c to arc.c -Added checks of the result of calloc/malloc calls -Reworked arc_cmd.c: replaced spagetty code with functions -Moved to one style in if statements - to "if(!bla)" -Changed Licence headers 22.01.2020 -Removed unused variables in arc_common -Renamed register operation functions -Introduced arc_deinit_target function -Fixed interrupt handling in halt/resume: * add irq_state field in arc_common * fix irq enable/disable calls ( now STATUS32 register is used) -Switched from buf_set(get)_us32() usage to target_buffer_set(get)_u32() -Made some cleanup 30.01.2020 -Removed redundant arc_register struct, moved target link to arc_reg_desc -Introduced link to BCR reg cache in arc_common for freeing memory. -Now arc_deinit_target frees all arc-related allocated memory. Valgrind shows no memory leaks. -Inroduced arch description in arc.c 01.02.2020 -Remove small memory allocations in arc_init_reg. Instead created reg_value and feature fields in arc_reg_desc. -Add return value for arc_init_reg() func. -Replaced some integer constants(61,62,63) with defines. -Removed redundant conversions in arc_reg_get_field(). -Moved iccm/dccm configuration code from arc_configure() to separate functions. 19.02.2020 -Change sizeof(struct) to sizeof(*ptr) in allocations -Changed if/while(ptr != NULL) to if/while(ptr) -Removed unused variables from struct arc_jtag -Add additional structs to arc_reg_data_type to reduce amount of memory allocations calls and simplifying memory freeing. -Add helper arc_reg_bitfield_t struct which includes reg_data_type_bitfield object and char[] name. Reduces memory allocations calls. -Add limit for reg_type/reg_type_field names(20 symbols). -Add in jim_arc_add_reg_type*() functions additional argnument checks(amount of field/name size). -In jim_arc_add_reg_type*() reduced amount of memory allocations. -Cleanup of jim_arc_add_reg_type*() functions. -For commands update ".usage" fields according docopt. -Cleanup in arc_jtag.c -Renamed functions which require jtag_exeutre_queue() to arc_jtag_enque_*() -Add arc_jtag_enque_register_rw() function, which r/w to jtag ir/dr regs during regiter r/w. 24.02: -Change include guards in arc* files according coding style -Remove _t suffix in struct arc_reg_bitfield_t -Some cleanup Change-Id: I6ab0e82b12e6ddb683c9d13dfb7dd6f49a30cb9f Signed-off-by: Evgeniy Didin <didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Reviewed-on: http://openocd.zylin.com/5332 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-24coding style: doc: remove empty lines at end of text filesAntonio Borneo3-3/+0
Empty lines at end of text files are useless. Remove them. Change-Id: I30e4d3d03c4ce846aa7bcefa7366f88732275557 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5170 Tested-by: jenkins
2020-02-24coding style: testing: remove empty lines at end of text filesAntonio Borneo39-81/+6
Empty lines at end of text files are useless. Remove them. Change-Id: Id05a7bd944edccaa03ed9eb48599b2e262664cf0 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5169 Tested-by: jenkins
2020-02-24coding style: tools: remove empty lines at end of text filesAntonio Borneo3-3/+0
Empty lines at end of text files are useless. Remove them. Change-Id: Iea4c8425e137d6252fb2e5b62e0b124c73a01cb6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5168 Tested-by: jenkins
2020-02-24coding style: add newline at end of text filesAntonio Borneo30-30/+30
Some text file is missing newline at EOF. Add it. Change-Id: Ieebc790096f40961283c644642e56fde975e957f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5167 Tested-by: jenkins
2020-02-24coding style: fix space around pointer's asteriskAntonio Borneo16-39/+39
The script checkpatch available in new Linux kernel offers an experimental feature for automatically fix the code in place. While still experimental, the feature works quite well for simple fixes, like spacing. This patch has been created automatically with the script under review for inclusion in OpenOCD, using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types POINTER_LOCATION --fix-inplace -f {} \; then manually reviewed. OpenOCD coding style does not mention the space around pointer's asterisk, so no check is enforced. This patch only makes the style uniform across the files. The patch only changes amount and position of whitespace, thus the following commands show empty diff git diff -w git log -w -p git log -w --stat Change-Id: Iefb4998e69bebdfe0d1ae65cadfc8d2c4f166d13 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5197 Tested-by: jenkins
2020-02-24log: let command "log_output" to set back its defaultAntonio Borneo2-5/+16
The default log output is stderr. After the command "log_output" has been used to set an output log file, it is possible to return back to stderr only on *NIX hosts specifying a new log output file as "/dev/stderr", but this is not intuitive, not documented and not portable out of *NIX. Make command "log_output" able to set back the default output to stderr when the parameter is either "default" or is missing. While there, add debug message to log the change and make the command return error on incorrect syntax. Change-Id: I8c7c929780f58e2c23936737c8e7274a96734786 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5233 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-24adi_v5_dapdirect: fix connect under resetAntonio Borneo1-1/+10
Deassert the reset only if connect under reset is not required; otherwise, assert the reset. This fix aligns the behavior of connect under reset in dapdirect with the behavior in jtag and swd. Change-Id: I937ef4320b44e51ef6cb0e349e12348dbfbe4abb Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5415 Tested-by: jenkins
2020-02-24flash/nor/stm32l4x: Minor code cleanupsMarc Schink1-9/+6
Change-Id: I3053bbe888ac1f0a0593ef51bf9ca564f1cc27ec Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5449 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-24flash/nor/stm32h7x: Minor code cleanupsMarc Schink1-9/+6
Change-Id: Ia212b1877abeda27f507de29a3aee2b171c1b8c6 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5448 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Christopher Head <chead@zaber.com>
2020-02-24Support bitbanging on 64-bit ARM CPUs.Mara Bos1-9/+14
The configure.ac file restricted this to only 'arm' CPUs, but ${host_cpu} is 'aarch64' (not 'arm') for 64 bit ARM CPUs. Tested on a Raspberry Pi compute module 3. Change-Id: I6cb1d7e7fadc51dbb12419176f1faf0a0cb0b228 Signed-off-by: Mara Bos <m-ou.se@m-ou.se> Reviewed-on: http://openocd.zylin.com/5274 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-23tcl/board: update ST NUCLEO-H745ZI-Q configuration file to use dapdirectTarek BOCHKATI1-7/+5
this board embeds and STLINK DAP capable firmware Change-Id: I276e9f44ad6cf7d1ff664898bbc884676bdbc967 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5316 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-23target/adi_v5_swd: fix clang static analyzer warningTomas Vanek1-1/+1
Change-Id: I24b3e74b62fad469e3150ad97a10a9ab69c2793b Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/5374 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-23flash/nor/tcl.c: add filld command to write double-word with 64-bit valueTarek BOCHKATI2-6/+25
Change-Id: I2eeda7af7d855ed1284083d025994f8fa9531969 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5443 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23flash/nor/stm32l4x: lock flash after errorTomas Vanek1-22/+31
Also add locking after option write, it was missing at all. Change-Id: I0227c6a74866f0fe8e40aa58616f0b3115ad5af0 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/5361 Tested-by: jenkins Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2020-02-23tcl/board: Add imx8mp-evkLeonard Crestez1-0/+15
Board includes an internal adapter (interface/ftdi/imx8mp-evk.cfg) and a standard external ARM-10 connector. Change-Id: Ibb301011665b1edfb95be1213d8100143f6839dd Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5427 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23tcl/interface/ftdi: Add imx8mp-evk internal JTAG interfaceLeonard Crestez1-0/+28
The imx8mp-evk board has a FT4232H chip connected to the chip's JTAG pins. Switching between this on-board interface and the external ARM-10 connector is controlled by an GPIO which is behind an i2c expander connected to the same FTDI chip. Switching can be performed using the NXP bcu tool: https://github.com/NXPmicro/bcu Change-Id: Ic910515f76eaf09ea6d0f755b026fb09cf09ccfc Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-on: http://openocd.zylin.com/5426 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23flash/stm32h7x: use alignment infrastructureChristopher Head1-24/+8
Report the 32-byte alignemnt requirement via the bank structure rather than enforcing it ad-hoc in the write routine. This allows people to do non-32-byte-aligned writes if they want, with the infrastructure fixing up the addresses passed to the low-level driver. Change-Id: I2c4f532f2000435954a900224dbc9f2c30d1cc94 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5388 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-23flash/nor/stm32f1x: Some small code cleanupsMarc Schink1-9/+6
Change-Id: I1fc08b96b179a1376af233b713ae50d6ad7867a0 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5404 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2020-02-23flash/nor/stm32h7x: check OPTCHANGEERRChristopher Head1-1/+8
Without this, a failed attempt to change option bytes will silently appear to succeed but without actually changing the option bytes (confusingly, the option bytes will still read back as if they had been changed until a reboot as well!). Change-Id: Id529c6c384a8a16be75f5702310670d99d8fac79 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5418 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2020-02-23flash/nor/stm32h7x: fix incorrect array indexingChristopher Head1-1/+1
Change-Id: Iec2246df284953d1442dfefdad8e70041690dfe2 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5417 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2020-02-15stlink: add trace support in DAP direct modeAntonio Borneo1-0/+17
Reuse the existing tracing functionality of HLA mode to support tracing in DAP direct mode. Change-Id: I75a01e88ba5d3e45717e4108b99697ac3225db9e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5409 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2020-02-15armv8: check the core state to pass the correct arch to gdbAntonio Borneo1-1/+2
Commit 3799eded6761 ("target/aarch64: add support for multi-architecture gdb") passes the constant string "aarch64" as architecture to gdb. This is not working if the core is running in 32 bits mode; gdb reports: Truncated register 8 in remote 'g' packet then closes the connection with OpenOCD. Make the architecture string dependant from the current state of the core. Change-Id: I16e1614ea02ba29bf87f450b3dfe25c83c9a3612 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5234 Tested-by: jenkins Reviewed-by: Muhammad Omair Javaid <omair.javaid@linaro.org>
2020-02-15coding style: use ARRAY_SIZE() when possibleAntonio Borneo4-5/+4
We have the macro ARRAY_SIZE() already available. Use it! Issue identified by checkpatch script from Linux kernel v5.1 using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types ARRAY_SIZE -f {} \; Change-Id: Ic7da9b710edf118eacb08f9e222f34208c580842 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5198 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-15coding style: remove unnecessary parenthesesAntonio Borneo2-2/+2
Identified by checkpatch script from Linux kernel v5.1 using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types UNNECESSARY_PARENTHESES -f {} \; then fixed manually. Change-Id: Ia2d9a0953d9b89fc87dc1195aa05c7f63c068c48 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5196 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-15jtag/startup.tcl: remove trailing whitespacesAntonio Borneo1-5/+5
Change-Id: I1d6f4f47ee6f8985c84ddb2647e029c5f4e6a55a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5194 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de>
2020-02-15target/nds32: fix type of magic numberAntonio Borneo1-2/+2
The macro NDS32_COMMON_MAGIC was cast-ed to int to avoid compile time error for comparison type mismatch while comparing it with the field common_magic. This is incorrect because the macro value is a 32 bit unsigned value; better changing the type of the field common_magic to keep the unsigned value. Issue identified by checkpatch script from Linux kernel v5.1 using the command find src/ -type f -exec ./tools/scripts/checkpatch.pl \ -q --types TYPECAST_INT_CONSTANT -f {} \; Change-Id: Ib5924b6cecdffe70ab5c78d3b30a9c8e4deb7c7b Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5193 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-15flash/nor/stm32lx: Minor code cleanupsMarc Schink1-9/+6
Change-Id: I6440a4eb1f65a2f8ae2914b38f21a59955e85e0d Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5438 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-15jtag_vpi: added an option to stop simulation on exitJan Matyas1-5/+46
Command CMD_STOP_SIMU had been defined in jtag_vpi for a long time (since the beginning?) but has not been utilized until now. Its purpose is to signal to the jtag_vpi server (i.e. the RTL simulation software) that the simulation shall be stopped. This commit adds a TCL configuration command that selects whether CMD_STOP_SIMU will be sent to the jtag_vpi server when OpenOCD is about to exit. This functionality is off by default to maintain identical behavior as in previous OpenOCD versions, unless the user enables it explicitly. Change-Id: If3894af6efa61038ccf6c9191f664e2128f2ef11 Signed-off-by: Jan Matyas <matyas@codasip.com> Reviewed-on: http://openocd.zylin.com/5407 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-15Include start-of-region addressPiotr Kasprzyk1-1/+1
When $ADDRESS == $BASE that address used to be excluded. After this commit $ADDRESS == $BASE is within the range. Now the rule for "iswithin" is: $BASE <= $ADDRESS < ($BASE + $LEN) Thanks to Antonio Borneo <borneo.antonio@gmail.com> for noticing this. Change-Id: I74373c6010e069372d886fa7ecd8120892616834 Signed-off-by: Piotr Kasprzyk <ciri@ciri.pl> Reviewed-on: http://openocd.zylin.com/4799 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-13flash/stm32lx: mention explicitly that this driver covers STM32 L0 and L1Tarek BOCHKATI3-2/+6
this is to avoid confusion with STM32 L4, L4+ and L5 families also: - a warning message is changed to error - stm32l0x and stm32l1x aliases has been created to permit the usage of either names Change-Id: If3f16d2a3b7d1369959aa7407da37a9076ea91d7 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5437 Reviewed-by: Marc Schink <dev@zapb.de> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-13flash/startup.tcl: update stm32 flash driver aliasesTarek BOCHKATI1-15/+8
This will enable us to use either name when calling flash driver commands. For example the stm32wbx family use the same flash driver as the stm32l4x, so the user has to use 'stm32l4x lock 0' which can be confusing. Now the user can also use 'stm32wbx lock 0' with the same result. Change-Id: Ic0d8da9afc202d7cc82d9b9949827e958a1cc824 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5436 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-09jtag: Fix copy-paste error in 'irscan' helpMarek Vasut1-1/+1
Replace "Instruction Register (DR)" with "Instruction Register (IR)", that is sed "s@DR@IR@", which was likely a copy-paste error. Change-Id: I3e625872c855d655485b3efa5f50fe1c00ecbf52 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5446 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2020-02-08tcl: Remove executable bitMarc Schink9-0/+0
Change-Id: Ib452435b13c3cb8d14453d983151936238b9601d Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/5419 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2020-02-08efm32: add EFR32ZG13P and EFR32ZG14P partsFrank Hunleth1-0/+2
This adds the EFR32 Zen Gecko Family parts. The device family values are found in table 4.7.11 of https://www.silabs.com/documents/public/reference-manuals/efr32xg14-rm.pdf. Change-Id: I3858b7ba815784b1150e2214a2833e8ff7d249e1 Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com> Reviewed-on: http://openocd.zylin.com/5364 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de>
2020-02-08stlink: fix max packet size for 8 bit R/W on stlink-v3Antonio Borneo1-2/+7
While ST internal documentation for STLINK-V3 reports that 8 bits read/write commands handle 512 bytes of data, a firmware bug makes it crashing on high data size. This is fixed with firmware V3J6 (shipped together with V2J36). Check for firmware version to use the proper data size. Change-Id: Iaba6cd26bbe130097c1c19de610680e0e8b69bfc Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Fixes: https://sourceforge.net/p/openocd/tickets/259/ Reviewed-on: http://openocd.zylin.com/5408 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-08jtag: flush jtag queue after jtag_add_tlr()Antonio Borneo1-0/+1
If the TLR sequence is sent as result of the command "adapter assert trst" while polling is off, the TLR sequence is not sent out until a following jtag operation. Flush the jtag queue before return. Change-Id: I20efd7137cb7b1d1c4f73c1362cbe4e57aeaae49 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5405 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2020-02-08Switch to HTTPS for submodulesChristopher Head1-3/+3
repo.or.cz already redirects HTTP requests to HTTPS. There is therefore no possible benefit to keeping the submodule URLs using HTTP—anyone who can’t access via HTTPS will fail anyway, immediately after the redirect. Changing the submodule URLs eliminates one unnecessary HTTP request and, more importantly, eliminates SSLStrip-style attacks. Change-Id: I9faf1ec8aa87bcfd1acafe2c445a0baf2abfbd09 Signed-off-by: Christopher Head <chead@zaber.com> Reviewed-on: http://openocd.zylin.com/5406 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
generated by cgit v1.1 at 2024-08-19 07:18:41 +0000