aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-19build: remove warnings with gcc 11Rene Kita2-6/+6
This removes some warnings which prevent a successful build with -Werror which is enabled by default. I'm using gcc 11, so maybe others are not getting this warnings yet. In src/flash/nor/numicro.c the debug messages were misleadingly indented. In src/target/arm920t.c the array size where smaller than expected from the receiving function. Change-Id: I66f5c6a63beb9f9416e73b726299297476c884d8 Signed-off-by: Rene Kita <git@rkta.de> Reviewed-on: http://openocd.zylin.com/6104 Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-19aarch64: handle semihosting in aarch32 stateTarek BOCHKATI2-8/+56
Change-Id: I0e868d617db126a2b258e27b11979b75b5bb72f5 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5860 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-19tcl/interface/ftdi: Add miniWiggler debugger configAndrew Wesie2-0/+37
Change-Id: I91f73a377cd9525008d09fda7a7c58d498014b74 Signed-off-by: Andrew Wesie <awesie@gmail.com> Reviewed-on: http://openocd.zylin.com/6111 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-19telnet: support end and home keysTarek BOCHKATI1-0/+6
this will help navigate to the line start and end easily Change-Id: I3f42eb5267df64c59a85ece67de5fce39a8843ec Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6094 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-19Implement CRC32 algorithm for RISC-V.Tim Newsome6-6/+382
Signed-off-by: Tim Newsome <tim@sifive.com> Change-Id: Id437f78e74e3d837ff203f84c4eeb996bfad9a01 Reviewed-on: http://openocd.zylin.com/6076 Reviewed-by: Jan Matyas <matyas@codasip.com> Reviewed-by: Marc Schink <dev@zapb.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-19aarch64: add support for "reset halt"Christian Hoff2-7/+108
Support halting the CPU directly after a reset. If halt is requested, the CPU stops directly at the reset vector, before any code is executed. This functionality was implemented using the Reset Catch debug event. Change-Id: If90d54c088442340376f0b588ba10267ea8e7327 Signed-off-by: Christian Hoff <christian.hoff@advantest.com> Reviewed-on: http://openocd.zylin.com/5947 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-03-19jtag: remove minidriver code and minidriver-dummyAntonio Borneo13-341/+3
With zy1000 removed, there is no other implementation that uses the minidriver, apart from the test/example minidriver-dummy. While the idea of the minidriver is probably still valid (that is to intercept jtag primitives before serialization), there is no current use case, no guarantee it is really working, and the way it was implemented (by macros and #if conditionals) is really hard to maintain and test. Let's let it rip in git history, from where it could eventually be taken back in a more modern implementation. The entry points of minidriver API are still in the code with the original names. Change-Id: I882e32cb26cf5842f9cba14e3badaf8948e3760d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6091 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19zy1000: drop the code, deprecated in v0.10.0Antonio Borneo10-1666/+5
The code for zy1000 has been marked as deprecated in release v0.10.0, 4 years ago. Time to drop it! Change-Id: I08fca2a2bf8f616f031e15fd37dac3197a40ba50 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6090 Tested-by: jenkins
2021-03-19ioutil: drop the code, deprecated in v0.10.0Antonio Borneo7-671/+0
The code for ioutil has been marked as deprecated in release v0.10.0, 4 years ago. Time to drop it! Change-Id: I36dce1669ebe9acada5f9e752835c53e5214e3be Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6089 Tested-by: jenkins
2021-03-19oocd_trace: drop the code, deprecated in v0.10.0Antonio Borneo6-528/+0
The code for oocd_trace has been marked as deprecated in release v0.10.0, 4 years ago. Time to drop it! Change-Id: I989f8345dee4ff2369bcf5e2e2ace86bbd5aa6a5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6088 Tested-by: jenkins
2021-03-19target: remove handling of target's deprecated_nameAntonio Borneo2-10/+0
We do not have anymore any deprecated target name. Drop the code to handle deprecated target names and the placehold in struct target_type. This patch is separated from the patch that drops the remaining deprecated target names to be ready to revert this if there is any need in the future. Change-Id: I96fca7ffa39d8292f81e79f115ea45c4a30035d7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6087 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19target: remove target names already deprecated in v0.8.0Antonio Borneo3-3/+0
Some target name were marked as deprecated in release v0.7.0 and v0.8.0, almost 7 years ago, and replaced with more 'actual' names. We can reasonably expect that in these 7 years any user of OpenOCD has already migrated to v0.8.0 or to some newer release, thus has already updated any local/personal script to get rid of the deprecated message. Drop the target names already deprecated in v0.8.0. Change-Id: I7c7491496db1b302b4eb1e9fc6090b58d4acf05a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6086 Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19startup.tcl: remove commands already deprecated in v0.7.0Antonio Borneo3-70/+1
Some command were already marked as deprecated in release v0.7.0, more then 7 years ago, and for some of them the depredation date is even earlier. We can reasonably expect that in these 7 years any user of OpenOCD has already migrated to v0.7.0 or to some following intermediate build, thus has already updated any local/personal script to get rid of the deprecated message. Drop the commands already deprecated in v0.7.0. Change-Id: I81cdc415ab855ebf30980ef5199f9780c5d7f932 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6085 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19openocd: remove command line flag -p/--pipe deprecated in v0.5.0Antonio Borneo2-12/+1
The OpenOCD command line flag -p/--pipe was marked as deprecated in release v0.5.0, more than 9 years ago. We can reasonably expect that in these 9 years any user of OpenOCD has already migrated to v0.5.0 or to some newer release, thus has already updated any local/personal script to get rid of the deprecated message. Drop the command line flag already deprecated in v0.5.0. Change-Id: I2faeb592ed2c2f67c2d3227f118093e39fcf4a8c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6084 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19target/arm920t: remove command 'arm920t cp15i' deprecated in v0.4.0Antonio Borneo2-95/+0
The command 'arm920t cp15i' was marked as deprecated in release v0.4.0, almost 11 years ago. We can reasonably expect that in these years any user of OpenOCD has already migrated to v0.4.0 or to some newer release, thus has already updated any local/personal script. There is no run-time warning about the deprecation, but it is reported in the help and in the documentation. Drop the command already deprecated in v0.4.0. Change-Id: I755c4283e13e125558fcd73b15fe20498eae95ca Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6083 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-19target/arm720t: remove command 'arm720t cp15' deprecated in v0.4.0Antonio Borneo2-96/+0
The command 'arm720t cp15' was marked as deprecated in release v0.4.0, almost 11 years ago. We can reasonably expect that in these years any user of OpenOCD has already migrated to v0.4.0 or to some newer release, thus has already updated any local/personal script. There is no run-time warning about the deprecation, but it is reported in the help and in the documentation. Drop the command already deprecated in v0.4.0. Change-Id: I2b325d0312d96ca5e5f0f1bad13bb162b3b75c52 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6082 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-16flash/stm32l4x: zero init stm32l4_flash_bank struct on flash bank initializationRaúl Sanchez Siles1-1/+1
This is specially needed when, in the probe routine, device is not found among the stm32l4_parts. In this case, the stm32l4_flash_bank->part_info is undefined and inadvertentanly used afterwards: part_info = stm32l4_info->part_info; If the stm32l4_flash_bank is zero init, the probe routine checks for the validity of the part_info field in the previous struct and correctly detects the unsupported (or not found) condition, raising an error rather than a SIGSEGV Change-Id: I7d9d669fb3fa7f8f0903acd60046966b4acb0031 Signed-off-by: Raúl Sánchez Siles <rasasi78@gmail.com> Reviewed-on: http://openocd.zylin.com/6103 Tested-by: jenkins Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2021-03-10configure.ac: switch to autoconf 2.69Antonio Borneo1-1/+1
OpenOCD file configure.ac requires autoconf equal or newer then 2.64, which is quite old. These are the release dates so far: - autoconf-2.64 2009-07-26 - autoconf-2.65 2009-11-21 - autoconf-2.66 2010-07-02 - autoconf-2.67 2010-08-02 - autoconf-2.68 2010-09-22 - autoconf-2.69 2012-04-24 - autoconf-2.70 2020-12-08 Switch to autoconf 2.69, which is old enough to be the standard in current systems. This should reduce the effort on configure.ac compatibility. Change-Id: Ia7c78d2fa34c50ed5ccf4fb66ad3484369cf3b4a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6008 Tested-by: jenkins
2021-03-10jimtcl: update to version 0.80 (2020-10-29)Antonio Borneo2-0/+2
Update jimtcl to version 0.80. Add a workaround in Makefile.am to allow 'make distcheck' with the new jimtcl. A fix is already merged upstream but will be part of the future release 0.81 of jimtcl. Change-Id: I1cebfb9c17179114960dc771e0b31836b4b9b058 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5949 Tested-by: jenkins
2021-03-10tcl/target: add BCM2711 configuration fileTarek BOCHKATI1-0/+62
The Broadcom BCM2711 used in Raspberry Pi 4 No documentation was found on Broadcom website Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711/ Change-Id: I3db6c9af520af8ab4c21ad35ff0f2db28efc0325 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6066 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: add BCM2837 configuration fileTarek BOCHKATI1-0/+64
This is the Broadcom chip used in the Raspberry Pi 3, and in later models of the Raspberry Pi 2. Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837 https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837b0 Change-Id: I1188a7866304c59f670a543809aca3927174786e Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6069 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: add BCM2836 configuration fileTarek BOCHKATI1-0/+59
The Broadcom chip used in the Raspberry Pi 2 Model B Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836 Change-Id: I50b040db213c5b72f63d5f5534c552426c7376f9 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6068 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: add BCM2835 configuration fileTarek BOCHKATI1-0/+24
This is the Broadcom chip used in the Raspberry Pi Model A, B, B+, the Compute Module, and the Raspberry Pi Zero. Partial information is available in raspberry pi website: https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2835 Change-Id: Ifeb012952473d624327e8c010ac5c886d9473aa0 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6067 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10flash/nor/stmqspi: Replace macros with static inline functionsMarc Schink1-96/+131
There is no good reason to use macros instead of static inline functions. The current code is hard maintain. For example, it changes variables outside of the macro scope. Also, it is conflicting with the C coding style. Change-Id: I5ac9d2ae076ef73c176d4e32b2e7e0a99fa875ab Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6046 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10stlink: swo: use completely the available bufferAntonio Borneo1-1/+1
The buffer passed to stlink_usb_trace_read() is allocated of size *size and does not need to be zero-terminated. There is no reason to not fill its last byte. When checking the bytes available on swo, limit the retrieved byte length to *size. Change-Id: Iade0f8963118695931f13a8a3f1ab204911236b6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reported-by: Adrian Negreanu <adrian.negreanu@nxp.com> Reviewed-on: http://openocd.zylin.com/6061 Tested-by: jenkins Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com> Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
2021-03-10jtag/nulink: add a space after PRIx32Antonio Borneo1-2/+2
Missing the space cause the hex value to be printed together with the following field. Add a space after PRIx32. Change-Id: I95824a9a8b8c0ad911d6c31f732d926cb3e0c068 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6060 Tested-by: jenkins Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
2021-03-10cortex_m: avoid reading and writing non-existent registersTarek BOCHKATI3-6/+6
Change-Id: Iedc24352c8d3444372da06d00fcec9603540f950 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/6059 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10Add configuration file for Olimex H405Felipe Balbi1-0/+8
Change-Id: I34a030f65ebe041408655ea9792346b146bd1092 Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-on: http://openocd.zylin.com/6049 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10server: revert commit 7e6556b3cad8Antonio Borneo8-14/+8
With the removal of old tpiu code, commit 7e6556b3cad8 ("server: permit the add_service function to return the created service") http://openocd.zylin.com/5717/ can be reverted. Fix also the new calls to add_service(). Change-Id: Ib7f2dfc6a9e829239e20313e0f121911085fdc00 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6031 Tested-by: jenkins Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
2021-03-10armv7m_trace: get rid of the old tpiu codeAntonio Borneo9-432/+223
Remove all the old tpiu code and replace it with a wrapper that uses the new commands, prints-out the new commands and informs about the deprecation. All the code that handles the deprecated tpiu commands is enclosed between the comments /* START_DEPRECATED_TPIU */ and /* END_DEPRECATED_TPIU */ so will be easy to remove it in the future. Change-Id: I70b0486770128203b923346382d9a90b8ec08439 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6030 Tested-by: jenkins Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
2021-03-10tcl/target: start using the new TPIU/SWO supportAntonio Borneo3-12/+54
Create the TPIU and SWO device in target config file. Replace the target event 'trace-config' with the TPIU/SWO event 'post-enable'. Extend the existing code in the event handler to properly set the gpio mode and speed to permit synchronous trace. This patch is not exhaustive of all the targets that have SWO, but has to be considered as an initial example. Change-Id: If4bbf364c0d2aef3ae49951e76507a3b1cfd58e7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5859 Tested-by: jenkins Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
2021-03-10arm_tpiu_swo: add support for independent TPIU and SWOAntonio Borneo5-6/+1164
This is supposed to replace big part of armv7m_trace.[ch], since TPIU is not only the one implemented in Cortex-M3 and M4. Change-Id: I7588d16cbefe9cdb371c52fb0aa5cdfb48518804 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5858 Tested-by: jenkins
2021-03-10itm: rework itm commands before 'init'Antonio Borneo3-6/+11
If the command 'itm port[s]' is issued before 'init', the ITM can not be programmed because OpenOCD cannot access the target yet. The configuration is recorded and applied after target examine. The current test to trigger the ITM delayed-programming is based on the TPIU configuration. This is allowed because the only use of ITM it so send data through TPIU. In case of system TPIU, not belonging anymore to the target, there is no more association between target ITM and system TPIU. Add a flag to record the pending ITM configuration requested before 'init' and test the flag to trigger the delayed-programming of the ITM. Change-Id: I101eb97a116d7925cd2ff068f3e8813fc008b08e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/6029 Tested-by: jenkins
2021-03-10stlink: fix execution order in stlink_config_trace()Antonio Borneo2-8/+17
The change [1] guarantees that the value pointed by 'prescaler' gets always set, even when the adapter does not support the specific mode requested (e.g. sync), or during trace disabling. This works fine with the code in armv7m_trace_tpiu_config(), but requires all the parameters to be valid also to disable the trace (with 'enable==false'), otherwise returns error on incorrect parameters or even causes segmentation fault if pointers 'trace_freq' or 'prescaler' are NULL. Another problem in stlink_config_trace(), not linked with [1], is caused by a tentative to change the settings on an already enabled trace; the trace is disabled before the new parameters are fully validated and in case of invalid parameters the trace is not re-enabled. It would be more logical to first check all the parameters, then disable the trace, change the settings and re-enable the trace. Practically revert [1] by checking 'enable==false' at function entry, then disable trace and exit without any further check on the other parameters. For the case 'enable==true', validate all the function parameters then disable the trace, update the trace settings and re-enable the trace. Modify the caller armv7m_trace_tpiu_config() to initialize the variable 'prescaler' to a safe value to avoid the issue targeted by [1]. [1] commit 38277fa75280 ("jtag/drivers/stlink_usb: fix SWO prescaler") Change-Id: Ia6530682162ca2c9f5ac64301f2456f70cc07ed2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5934 Tested-by: jenkins Reviewed-by: Adrian M Negreanu <adrian.negreanu@nxp.com>
2021-03-10drivers/rlink: switch to libusb1Antonio Borneo2-85/+117
Convert the driver from libusb0 to libusb1. Change-Id: I17d14522db18b4050d462d23151ec97d3a315a7f Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5991 Tested-by: jenkins Reviewed-by: Marc Schink <dev@zapb.de>
2021-03-10armv7m_trace_itm_config: wait for ITMBusy to be clearedAdrian Negreanu2-0/+30
pg315 of CoreSight Components: It is recommended that the ITMEn bit is cleared and waits for the ITMBusy bit to be cleared, before changing any fields in the Control Register, otherwise the behavior can be unpredictable. Change-Id: Ie9a2b842825c98ee5edc9a35776320c668047769 Signed-off-by: Adrian Negreanu <adrian.negreanu@nxp.com> Reviewed-on: http://openocd.zylin.com/6043 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10cmsis_dap: remove DAP_MAX_CLOCKAdrian Negreanu1-7/+0
Discussed here: https://sourceforge.net/p/openocd/mailman/message/35466010/ Change-Id: Ic4d38a872f4b13b794ad0a8a2abdbe5bb21eced3 Signed-off-by: Adrian Negreanu <adrian.negreanu@nxp.com> Reviewed-on: http://openocd.zylin.com/5964 Tested-by: jenkins Reviewed-by: Bohdan Tymkiv <bhdt@cypress.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10target: Remove redundant initialization of endiannessYasushi SHOJI1-3/+0
target->endianness is initialized to TARGET_ENDIAN_UNKNOWN at 34 lines below, before calling target_configure. This initialization is redundant and not needed. Change-Id: Iea2d5e17a13c1a8b0b209ba7c20043736b520ef6 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Reviewed-on: http://openocd.zylin.com/6039 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10target/mips: Remove typedef'd structMarc Schink4-10/+10
The C style guide forbids typedef'd structs, see 'Naming Rules'. Change-Id: I449590251056c478c05105cdc18014ab4eb77ed8 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6033 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10flash/nand/lpc32xx: Remove typedef'd structMarc Schink1-10/+10
The C style guide forbids typedef'd structs, see 'Naming Rules'. Change-Id: I983dd52307136d1b5adb58d8c44c0c14422d31e2 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6032 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10rtos: Remove typedef'd structMarc Schink14-41/+41
The C style guide forbids typedef'd structs, see 'Naming Rules'. Change-Id: Ia7c8218fb61ff0c74b6dd0d10fb51a77cf059c14 Signed-off-by: Marc Schink <dev@zapb.de> Reviewed-on: http://openocd.zylin.com/6028 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/target: add Rockchip RK3399 targetJiri Kastner1-0/+79
Change-Id: I28f404b1e53fc9dbb04b3f939294ae248bbde183 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/5994 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10stlink: support of ST-LINK TCP server using stlink-dap and hlaTarek BOCHKATI4-19/+546
Quote: The ST-LINK TCP server is an application to share the debug interface of a single ST-LINK board among several host applications, typically a debugging tool and a monitoring tool. Note: ST-Link TCP server does not support the SWIM transport. ST-LINK TCP server allows several applications to connect to the same ST-Link through sockets (TCP). To use ST-LINK TCP server: - using stlink-dap : use 'st-link backend tcp [port]' - using hla : use 'hla_stlink_backend tcp [port]' the default port value is 7184 Change-Id: I9b79f65267f04b1e978709934892160e65bd2d6d Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5633 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10stlink: separate stlink core from USB functionsTarek BOCHKATI1-62/+141
the introduced stlink_backend_s struct provides an API to separate USB internals from stlink core. this separation aims to ease: - stlink-server integration [1] - stlink driver split into modules: - stlink_core - stlink_usb - stlink_tcp [1] [1] refer to http://openocd.zylin.com/#/c/5633/ Change-Id: Iff6790942612ce1769ec4c75990914534e5e9e24 Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com> Reviewed-on: http://openocd.zylin.com/5632 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10eMAG: Add Ampere eMAG config filesAnthony Ferranti2-0/+150
Add board and target configuration files for Ampere eMAG8180 board and Ampere eMAG processor. Tested on an Ampere eMAG8180 development platform. Change-Id: I222653f0fc12d25202a7e469db3594076cbc38ed Signed-off-by: Anthony Ferranti <ferranti@os.amperecomputing.com> Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com> Reviewed-on: http://openocd.zylin.com/5569 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2021-03-10tcl/board: Add AM642 EVM basic supportNishanth Menon1-0/+24
Add basic connection details with AM642 EVM Change-Id: I95dcf6afadb61bfd8456b79274eae863b834167d Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5952 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Vignesh Raghavendra Tested-by: jenkins
2021-03-10tcl/board: Add J7200 EVM basic supportNishanth Menon1-0/+24
Add basic connection details with J7200 EVM Change-Id: Ia8fa5033a693ac09849d33693c81b8cb206f17c1 Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5951 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-10tcl/board: Add J721E EVM basic supportNishanth Menon1-0/+24
Add basic connection details with J721E EVM Change-Id: I0c2d25252432914d8e371e81761a59c05924bd8e Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5185 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-10tcl/board: Add AM654 EVM basic supportNishanth Menon1-0/+24
Add basic connection details with AM654 evm Change-Id: Iea2240860e50ae42cf6f1617a10e24f63c6dd988 Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5183 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
2021-03-10tcl/target: Add K3 basic supportNishanth Menon1-0/+256
Add basic connection details for AM654 and J721E SoCs from TI. See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: https://www.ti.com/lit/pdf/spruid7 See J721E Technical Reference Manual (SPRUIL1, May 2019) for further details: https://www.ti.com/lit/pdf/spruil1 See J7200 Technical Reference Manual (SPRUIU1, June 2020) for further details: https://www.ti.com/lit/pdf/spruiu1 See AM64X Technical Reference Manual (SPRUIM2, Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2 Change-Id: Ie5108c6ad6f1304a6bf5b9f81aa9ebd33b8a559d Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-on: http://openocd.zylin.com/5182 Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Tested-by: jenkins
generated by cgit v1.1 at 2024-09-28 18:11:40 +0000