aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-12-25Search for scripts relative to the executable on all(?) platformsAndreas Fritiofson2-33/+124
Add a helper to hide the platform-dependent method to get a canonical, absolute, /-separated path to the executable. Use this and the relative path from BINDIR to PKGDATADIR to construct a search path that finds the scripts even if the installation dir is moved, as long as the structure below $prefix is maintained. This method should fully support all the tricks you can to with autotools to customize the installed layout such as overriding the default directories at configure-time and overriding the configured directories at build-time. The exe path detection methods are combined from http://openocd.zylin.com/3388 by Rick Foos and http://openocd.zylin.com/3537 by Steven Stallion, as well as tips found all over internet. Change-Id: Ifc9cc9dd0bf52fbd67b1b0f2383318cda0c422c4 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Steven Stallion <sstallion@gmail.com> Reviewed-on: http://openocd.zylin.com/3889 Tested-by: jenkins Reviewed-by: Rick Foos <rfoos@solengtech.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-25jimtcl: update to 0.77, the current version, enable only specific modulesPaul Fertser3-1/+5
This is needed to fix build on aarch64 to get updated config.guess. Because some newer JimTcl modules that get enabled are failing to build on some of the platforms OpenOCD supports, enable only a fixed set that shouldn't cause any issues. We also disable running Jim Tcl tests on distcheck because they never worked (before 85358e479e5bbf295a5aaf743f3c29a5e1a4fd1c Jim commit) but didn't break Jenkins build; with newer version they're getting run and fail due to limited permissions for filesystem and networking operations. Change-Id: I0b6c6a00bf2cf0902bbb01c9c0224fe93c74ac94 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3700 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-25contrib: udev: modify rules for users physically in front of machine ↵Jiri Kastner4-136/+136
(TAG+="uaccess") Modern desktop systems with systemd recommend this way to give users access to devices. We change permissions to sane value along the way. See e.g. https://lists.debian.org/debian-devel-announce/2016/11/msg00008.html We also change the filename to put it in order with 71-seat.rules, 60 is default for dh_installudev so pick that as a reasonable value. Change-Id: I15f6fb1b6be853ac097d0ca91955609f9e5eb9cf Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/2804 Tested-by: jenkins Reviewed-by: Robert Jordens <jordens@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-25jtag: drivers: ulink: fix uninitialised variable warningPaul Fertser1-1/+1
This prevents clean build when --enable-verbose-jtag-io is used. Change-Id: I5c9e6968cfa425b1f6f92f59156b6ae38cb9af18 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3907 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-09board: add configuration for freescale twr-vf65gs10 system moduleMatthias Welwarsky2-0/+216
This patch contains configuration for the twr-vf65gs10 system module of the Freescale (NXP) tower system. It provides support for both the CMSIS-DAP available via USB and the Cortex+ETM connector on J5. The configuration also contains DDR and clock init code hooked into the reset-init event handler. Change-Id: I68303e0038e137dcadc57525e662428769fb69f2 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3564 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08stm32l0.cfg: Add examine-end event like on other STM32 targets.Uwe Bonnes1-0/+10
Enable debug in standby/stop/sleep. Stop watchdogs during halt. Change-Id: I8383a191cd897118bd88bf78528d05943f3a368e Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3882 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Fail on enabling sysfsgpio on non-linux OSAndreas Fritiofson1-0/+8
Change-Id: I5036d8eca6a6e6ed47e3b9ff78bc3a3bf34491fb Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3888 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Deprecate ZY1000, ioutils and oocd_traceAndreas Fritiofson1-0/+23
These have not been maintained for a very long time so I say it's time we remove them. Change-Id: Ic091978d734be09347e271736df0f7f7f9095243 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3885 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: De-duplicate code in AC_CHECK_HEADERSAndreas Fritiofson1-57/+1
Combine all checks that have the same required includes. Change-Id: I9b4567766e037922c2ffb737f32e9c12af43bf0e Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3884 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Convert to non-recursive makeAndreas Fritiofson26-800/+657
Change-Id: I11f8bc8553957e2ff083c09e72e16881e4d3bb6f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3865 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Consolidate platform definesAndreas Fritiofson1-16/+20
Change-Id: Iebc775baadeeb5e963fb48c0a9e8d87d26d9035a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3863 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Don't set user variablesAndreas Fritiofson2-3/+6
CFLAGS is a user variable and shouldn't be set in either configure.ac or Makefile.am because that makes it impossible to override compiler flags at configure or make time. AC_SUBST the default warning flags into AM_CFLAGS instead, which is emitted before CFLAGS on the compiler command line. Do the same thing with a mingw-specific flag as well. Change-Id: I6ac3a3c8b7e0abf6f0e60ea239b549d68ea6d370 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3870 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Add USE_* conditionals for hidapi and libjaylinkAndreas Fritiofson1-0/+2
For consistency with other libs. Change-Id: Id37329a00db5ab668f4c2c9ce53d2c41976649b1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3869 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Use same case for libjaylink as for other libsAndreas Fritiofson3-5/+5
Change-Id: I60d91a0543d9b8c580254cdc5f04b2e60209b98b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3868 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08target: LS1_SAP: fix "declaration of 'read' shadows a global" warningPaul Fertser1-4/+4
Change-Id: I7070193819cc134f9fe1427c20a11160ec415ccb Reported-by: Jens Bauer <jens-lists@gpio.dk> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3877 Tested-by: jenkins
2016-12-08target: Replace malloc+manual zeroing with callocAndreas Fritiofson1-8/+1
Change-Id: I3c782c34b59cb36b8ca1d36e9c804c67bae5cb45 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3667 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Replace shell constructs with M4sh macrosAndreas Fritiofson1-211/+198
AS_IF and AS_CASE should be used instead of if and case to properly handle macros in conditional branches. Also guard all tests against empty variables and embedded spaces which makes it possible to remove some variable defaults. Change-Id: Ib675177690d406a80ee98dd5d105296a7cdc7b8a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3669 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jlink: Output libjaylink versionMarc Schink1-0/+3
Output the package version of libjaylink to ease debugging. Change-Id: I3b9da6d046d140ba850056c98e67bed22c885ee0 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3887 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08libjaylink: Update to latest master branchMarc Schink2-6/+6
The changes since the last update are mainly related to the build system, preparations and cleanups for the upcoming release. If there are no bugs reported, this will be the last update before the libjaylink 0.1.0 release. Change-Id: I4cec9bb61159f6153690aaf39c1d12ba0baacf9b Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3886 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jlink: Add EMUCOM supportMarc Schink2-0/+163
EMUCOM is a way to communicate with a J-Link device via so called channels. A channel can either be read or written in a single operation. Beside the reserved channels for SEGGER, there are channels available to implement vendor and/or device specific functionalities. For example, EMUCOM is used on many starter and development kits from Silicon Labs to access power measurements and various other information and settings. Change-Id: I6094109c043b34aed4a40ceabe71f30ff896bf1d Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3794 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08flash/nor/efm32: Support flash size smaller than 32kkevin1-3/+3
The current implementation fails on devices with less than 32k of flash (such as several devices in the Zero Gecko family) because the 'assert' assumes (incorrectly) that the number of flash banks will always be >= 32. This change ensures that at least one word of lock bits is always read in order to support devices with less than 32k of flash. Signed-off-by: Kevlar Harness <software@klystron.com> Change-Id: I59febe2cb690c893a5057a5f72918e146cf2afe4 Reviewed-on: http://openocd.zylin.com/3806 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08xscale: Move debug handler to contrib/loadersAndreas Fritiofson10-22/+137
Avoid special rules to generate array at compile time by shipping the generated file. Convert to Makefile build like the other loaders. Change-Id: I5a05edddcfaff3d395086cd3aa33120f8a7aa9dc Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3864 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08cortex_a: fix reset for SWD transportMatthias Welwarsky1-3/+10
Change b0698501b0e789091e9f9f1427b32af304888769 fixed reset for i.MX6 and TI Sitara SoCs but broke reset for cortex-a targets that use SWD. This patch is a work- around that forces asserting SRST when SWD is used. Change-Id: I7e39f2a469b9b4b2b74ad48ba49f2eeb58528921 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3641 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Remove build date from banner for releasesAndreas Fritiofson2-1/+7
In support for reproducible builds, see https://wiki.debian.org/ReproducibleBuilds Fixes Debian bug #834316. Change-Id: Id81ec72a87bf6dd99abfd2a0ae074658111bc9a3 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3866 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Remove unused BUILD_BITQ and BUILD_BITBANG defineAndreas Fritiofson1-12/+0
Change-Id: Ibfb5e414dd77d2ce4b835007722eb18da3820f3a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3668 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Remove conflicting CMSIS_DAP conditionalAndreas Fritiofson1-1/+0
It's already defined by PROCESS_ADAPTERS. Change-Id: I3bbcb0f77c645e9c5a98c2d5069c178358d1516b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3239 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08configure: Detect libftdi using pkgconfigAndreas Fritiofson1-109/+26
Auto-enable libftdi adapter drivers if found, just like libusb and hidapi based adapters. Change-Id: I71a10c90c8b999c4cae9b4f8fb5e97971d03083b Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3238 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08cortex_m: allow setting debug ap during createMatthias Welwarsky6-5/+66
This patch adds a Cortex-M private configuration option that allows setting the acess point during target creation. This circumvents situations in hybrid systems when the correct access point can not be automatically detected. Change-Id: If313a5250e6e66509bb9080f3498feab7781dced Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3639 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08jtag/drivers/openjtag: Add support for Cypress CY7C65215Vianney le Clément de Saint-Marcq3-26/+275
The Cypress CY7C65215 Dual Channel USB-Serial Bridge Controller [1] understands the OpenJTAG protocol over a proprietary USB interface. This patch adds support for the CY7C65215 to the openjtag interface driver. A new configuration option, `openjtag_variant`, allows to select the transport to use. Libusb (1.x or 0.1) is now a hard dependency of the openjtag driver. This should not be a big issue as libftdi also depends on it. [1] http://www.cypress.com/?rID=82870 Change-Id: I55ffb3fd9e006eb311e405d9fb836bb119644bfd Signed-off-by: Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: http://openocd.zylin.com/2805 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08helper: Code cleanup for hexify()Marc Schink8-18/+46
Simplify hexify() and do not longer use 0 as special case for the parameter 'count' to determine the string length of the binary input. Instead, use strlen() outside of the function if needed. Additionally, fix the return value and return the length of the converted string. The old function always returned 2 * count. Also, use more appropriate data types for the function parameters and add a small documentation. Change-Id: I133a8ab786b8f7c1296afcaf9c0a0b43881e5112 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3793 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08jtag: drivers: bcm2835gpio: set 4ma drive, slow slew rateSean Cross1-2/+2
Both the drive strength and slew rate are currently set to very high values. This causes the waveforms to overshoot and be less reliable when operating at high speed. This patch lowers the slew rate and sets the drive strength to 4ma, improving the waveform output. Change-Id: I761d35cd64bc54a9e94043904ef00a003b056af0 Signed-off-by: Sean Cross <sean@xobs.io> Reviewed-on: http://openocd.zylin.com/3707 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Philipp Guehring <pg@futureware.at>
2016-12-08gdb_server: support qXfer:threads:read packetSteven Stallion9-24/+145
This patch adds support for the qXfer:threads:read packet. In addition to providing a more efficient method of updating thread state, recent versions of GDB (7.11.1 and up) can also report remote thread names. While thread names are not enabled in this patch due to its limited applicability at the moment, it can be enabled at a later date with little effort. As a part of revamping how threads are presented to GDB, extra info strings for each of the supported RTOSes were updated to match conventions present in the GDB source code. For more information, see remote_threads_extra_info() in remote.c. This results in a much smoother experience when interacting with GDB. It is also worth mentioning that use of qXfer:threads:read works around a number of regressions in older versions of GDB regarding remote thread display. Trust me, it's great. Change-Id: I97dd6a93c342ceb9b9d0023b6359db0e5604c6e6 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3559 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08semihosting: support fileio operationSteven Stallion12-158/+448
This patch adds support for bridging semihosting to GDB's File-I/O remote protocol extension. For the most part operations match up 1:1, however some require a working area to complete successfully, namely operations that devolve to read, stat, and gettimeofday. A new command was added to enable support for fileio named `arm semihosting_fileio`, which ensures that the default behavior remains intact for those that prefer it. Finally, redundant logging was removed from the target_arch_state function; this permits ARM targets to quiesce log output when polling for a fileio reply. This prevents filling the logs with halt/resume messages when using semihosting fileio. Change-Id: Ifbb864fc2373336a501cc0332675b887b552e1ee Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3566 Tested-by: jenkins Reviewed-by: Steven Stallion <sstallion@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08at91sam4: Add missing SAM4S family CHIPIDs and remove FWS=6.Owen Kirby1-17/+275
Add missing CHIPID values for all SAM4S parts listed in revision K of Atmel-11100-32-bit Cortex-M4-Microcontroller-SAM4S_Datasheet.pdf. I have also removed the FWS=6 workaround, as this appears to be a copy-paste error from the SAM3X family. Change-Id: I1ce1d82911f39d6fcb8f04034f5c9c9bf2818466 Signed-off-by: Owen Kirby <oskirby@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3837 Tested-by: jenkins
2016-12-08at91sam4: Add flash description and chipid for SAM4Cxx variants.Owen Kirby3-4/+211
Chip ID and flash layout taken from Atmel-11102F-ATARM-SAM4C32-SAM4C16-SAM4C8-SAM4C4-Datasheet_27-Mar-15 and tested on a SAM4C32-EK (rev A). Change-Id: I68aae5b60994c0b5964ea9031d40bc76ba025675 Signed-off-by: Owen Kirby <oskirby@gmail.com> Reviewed-on: http://openocd.zylin.com/3527 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08jtag: drivers: cmsis-dap: fix operation with SAMD10 Xplained boardPaul Fertser1-1/+3
Change-Id: I9164edeb83c9a9106e74798e98b9517177e83358 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3856 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08helper: Update jep106 database to JEP106ATAndreas Fritiofson1-4/+41
Change-Id: I2dac416189d16938597c073fd35ad654bca7484c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3871 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Cortex-R: Force usage of physical memory read/write since there is no MMUEvan Hunter1-2/+2
Change-Id: I69d6e6301ab66744258fe650a76c7241bebe00a8 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/3203 Tested-by: jenkins Reviewed-by: Girts Folkmanis <opensource@girts.me> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08rtos: add support for uC/OS-IIISteven Stallion7-10/+653
This patch introduces RTOS support for uC/OS-III. Currently, only FPU-less ARM Cortex-M targets are supported. Due to the configurability of the RTOS, an OpenOCD-specific file must be linked along with the project to determine the correct offsets within the OS_TCB structure. In addition to the above, a crash was fixed in rtos_get_gdb_reg_list such that RTOS support could be used between resets without restarting OpenOCD and support for the Hg packet was cleaned up. Change-Id: Ide004a689e6b886185df665c00fb644629eb31d1 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3556 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08target: Add verify_image_checksum commandMatthias Welwarsky2-5/+34
This avoids the secondary binary search if the checksum is different Change-Id: I986ba7687cea76f30e37a6bca58aabde18198263 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/2869 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08tcl/board: Add Infineon XMC4300 Relax EtherCAT Kit configAndreas Färber1-0/+12
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26". Change-Id: I31482734af7621593a244ffac9dd223408470609 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3876 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08xmc4xxx: Add support for XMC4300Andreas Färber1-2/+10
XMC4300 can reuse the existing XMC4700/XMC4800 sectors support. Add support for XMC4300 AA to the info command. Change-Id: Id929a51d20c73bd869a4457ffedc48ad5fa3f2df Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3875 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08dap_dp_init: remove loopJiri Kastner1-44/+42
current loop sounds to me like 'we don't know what we do, let's do it ten times, maybe we will have luck'. should be enough to 'ping' debug port using reading CRTL_STAT. tested on cortex-a8, snapdragon, jetson k1, cortex-r5, cortex-r4 Change-Id: Ibc62ac1eca06c141f4fccd5de7b11350ca1f35fd Signed-off-by: Jiri Kastner <cz172638@gmail.com> Tested-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/3193 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08cortex_a: remove partnum magic from arp_examine and dbginitMatthias Welwarsky3-121/+68
Depending on the Debug implementation the "OS Lock" feature might be implemented or not. It is not actually depending on the part number of the implemented ARM core but on the DBGOSLSR.OSLM bits. This patch removes querying the part number and implements proper parsing of OSLM. Result is a more generic approach that will work out-of-box on more devices. Change-Id: I79e052869c2f9af1d7fdedef42faddb7292e7332 Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on: http://openocd.zylin.com/3213 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Add -defer-examine option to target create commandMatthias Welwarsky5-10/+102
The '-defer-examine' option to target create allows declaring targets that are present on the chain, but not fully functional. They will be skipped by the initial arp_examine as well as arp_examine after reset. Manual examine using 'arp_examine' is needed to examine them, with the idea that some kind of actions is neeed to bring them to a state where examine will succeed (if at all possible). In order to allow value less options to target command, I had to relax the goi.argc check in jim_target_configure(). Change-Id: I9bf4e8d27eb6476dd9353d15f48965a8cfd5c122 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3076 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08tcl: Support for Analog Devices ADSP-SC58xPeter Lawrence1-0/+45
target tcl to enable debugging of ARM Cortex-A5 on ADSP-SC58x Change-Id: I378f8b94b7d6d6b9d0567985abc0e36aea7c8dea Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/3125 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2016-12-08flash/nor: at91samd protection bits write fixTomas Vanek2-40/+44
Flash protection set on a device with MANW=1 was lost after reset. Since #2903 the driver honored MANW bit and issued Write Page command just for main flash write. This change adds similar technique to samd_modify_user_row(). Minor code improvements: samd_check_error() returns error code corresponding to error type instead of bool. samd_check_error() does not clear STATUS register if no error bit is set. Eliminated double error check in call sequence samd_issue_nvmctrl_command() folowed by samd_check_error(). Missing error code ERROR_FLASH_PROTECTED added to src/flash/common.h. Change-Id: Icf59ab8803305d0cb3170c8a5089b8f9828b99f8 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3550 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-08tcl at91samdXX.cfg: update config to current OpenOCD statusTomas Vanek1-7/+1
Remove comment about workaround of not working 'reset halt' - not needed as 'reset halt' is working as expected @ EDBG with srst_only. Add srst_pulls_trst to reset_config as it no more triggers an error. Change-Id: I47cf445690c46ccfb866900cddbfcaefc8649f82 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3722 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-11-06Remove support for the GPL incompatible FTDI D2XX libraryAndreas Fritiofson14-1031/+44
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi only. Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3237 Tested-by: jenkins Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06Remove since long deprecated ft2232 driverAndreas Fritiofson62-5372/+13
Purge all legacy interface configurations so there's no more confusion over which one to use. Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just duplicates what INSTALL says. Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3236 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.1 at 2024-09-28 15:55:46 +0000