aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2006-08-31- endianess fixes everywhere but in the flash code. flashing might still be ↵drath27-257/+1288
broken on big-endian targets and/or hosts - added access to ARM920T vector catch register (via generic register mechanism) - don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache - read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands) - memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes) - made in_handler independent from in field (makes the handler more flexible) - added timeout to ft2232 when using D2XX library - fixed STR7x protection bit handling on second bank (thanks to Bernard) - added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen) - fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen) git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-20- made bp command more verbosedrath3-1/+12
- fixed bug that could result in register corruption on arm920t targets git-svn-id: svn://svn.berlios.de/openocd/trunk@89 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-17- updated version info in openocd.cdrath1-1/+1
git-svn-id: svn://svn.berlios.de/openocd/trunk@88 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-17- renamed jtag_interface_t.support_statemove to ↵drath8-14/+153
jtag_interface_t.support_pathmove (it is used to indicate jtag_add_pathmove support) - fixed small bug in str7x.c that printed an address instead of the target number in an error message - added support for Olimex ARM-USB-OCD. The new ft2232 layout is called "olimex-jtag" git-svn-id: svn://svn.berlios.de/openocd/trunk@87 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-14- fixed bug in .cfg files. Thanks to Michael Fischer for noticing this.drath2-6/+6
git-svn-id: svn://svn.berlios.de/openocd/trunk@86 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-14- updated configuration examples, installation instructions and README ↵drath5-61/+86
(including list of supported JTAG interfaces) git-svn-id: svn://svn.berlios.de/openocd/trunk@85 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-14- added support for the Signalyzer USB->JTAG dongle (www.signalyzer.com)drath1-8/+24
git-svn-id: svn://svn.berlios.de/openocd/trunk@84 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-11- added support for FreeBSD ppi (parallel port access similar to ↵drath8-828/+346
/dev/parport on linux) (thanks to Darius for this patch) - unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'. The library used to access the hardware is choosen during configure with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi. git-svn-id: svn://svn.berlios.de/openocd/trunk@83 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-06- fixed jtag_n[st]rst_delay. time is now miliseconds (as documented), not ↵drath1-2/+2
microseconds git-svn-id: svn://svn.berlios.de/openocd/trunk@82 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-06- fixed a minor problem with the GDB server that could drop the first packet ↵drath13-14/+561
(non-fatal) - fixed some small memory leaks (thanks to Spencer Oliver) - verify chip- and buswidth of cfi flash configurations - added support for ARM966E based systems (tested only with ST micro STR9, thanks to Spencer Oliver) git-svn-id: svn://svn.berlios.de/openocd/trunk@81 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-01- allow building for MinGW using either -mno-cygwin or the MinGW gccdrath7-11/+79
- added GiveIO support to the amt_jtagaccel driver - explicitly disable loopback mode for FT2232 devices - changed configuration options n[st]rst_delay to jtag_n[st]rst_delay - shutdown network services on exit git-svn-id: svn://svn.berlios.de/openocd/trunk@80 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-30- added configurable delays after reset lines get deasserted. useful if ↵drath6-6/+89
reset circuitry keeps lines asserted for too long. - additional debug output when opening the parallel port - fixed counting of available arm7/9 watchpoint units - 'flash write' now displays elapsed time git-svn-id: svn://svn.berlios.de/openocd/trunk@79 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-17- Added support for native MinGW builds (thanks to Spencer Oliver and ↵drath48-579/+1432
Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-25- fixed bug in Thumb sw breakpoint handling (thanks to Spen for this patch)drath3-24/+20
- fixed handling of services linked list (thanks to Spen for this patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@76 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-25- changed use of bzero (deprecated) to memset (thanks to Spen for pointing ↵drath3-9/+13
this out) - changed fallback implementation of strndup to something that works on all systems (thanks to Spen for this patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@75 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-25- added "version" command (patch from John Hartman, thanks)drath3-22/+38
- fixed bug in telnet history handling (patch from John Hartman, thanks) - OpenOCD version has been changed from SVN revision number to date/time git-svn-id: svn://svn.berlios.de/openocd/trunk@74 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-23- added support for AT91SAM7A3 flash (patch from andre renaud, thanks)drath9-30/+137
- fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-16- keep additional information for decoded instructionsdrath2-24/+176
git-svn-id: svn://svn.berlios.de/openocd/trunk@69 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-12- the 'help' command now takes an optional argument to display help only on ↵drath5-2/+1403
a certain command (thanks to Andrew Dyer for this enhancement) - OpenOCD now includes the ability to diassemble instructions on its own (only ARM for now, Thumb might follow). The command is "armv4_5 disassemble <address> <count> ['thumb']" (thumb is currently unsupported). I've compared the produced disassembly against GDB/GNU Objdump output, and it seems to be correct, but there may still be some bugs left. git-svn-id: svn://svn.berlios.de/openocd/trunk@68 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-05- fixed some spelling errors (thanks to Andrew Dyer)drath4-11/+11
git-svn-id: svn://svn.berlios.de/openocd/trunk@67 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02- prepare OpenOCD for branching, created ./trunk/drath93-0/+25116
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.1 at 2024-10-21 05:25:16 +0000