aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-12-08cortex_a: remove partnum magic from arp_examine and dbginitMatthias Welwarsky3-121/+68
Depending on the Debug implementation the "OS Lock" feature might be implemented or not. It is not actually depending on the part number of the implemented ARM core but on the DBGOSLSR.OSLM bits. This patch removes querying the part number and implements proper parsing of OSLM. Result is a more generic approach that will work out-of-box on more devices. Change-Id: I79e052869c2f9af1d7fdedef42faddb7292e7332 Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on: http://openocd.zylin.com/3213 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08Add -defer-examine option to target create commandMatthias Welwarsky5-10/+102
The '-defer-examine' option to target create allows declaring targets that are present on the chain, but not fully functional. They will be skipped by the initial arp_examine as well as arp_examine after reset. Manual examine using 'arp_examine' is needed to examine them, with the idea that some kind of actions is neeed to bring them to a state where examine will succeed (if at all possible). In order to allow value less options to target command, I had to relax the goi.argc check in jim_target_configure(). Change-Id: I9bf4e8d27eb6476dd9353d15f48965a8cfd5c122 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3076 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08tcl: Support for Analog Devices ADSP-SC58xPeter Lawrence1-0/+45
target tcl to enable debugging of ARM Cortex-A5 on ADSP-SC58x Change-Id: I378f8b94b7d6d6b9d0567985abc0e36aea7c8dea Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/3125 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2016-12-08flash/nor: at91samd protection bits write fixTomas Vanek2-40/+44
Flash protection set on a device with MANW=1 was lost after reset. Since #2903 the driver honored MANW bit and issued Write Page command just for main flash write. This change adds similar technique to samd_modify_user_row(). Minor code improvements: samd_check_error() returns error code corresponding to error type instead of bool. samd_check_error() does not clear STATUS register if no error bit is set. Eliminated double error check in call sequence samd_issue_nvmctrl_command() folowed by samd_check_error(). Missing error code ERROR_FLASH_PROTECTED added to src/flash/common.h. Change-Id: Icf59ab8803305d0cb3170c8a5089b8f9828b99f8 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3550 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-08tcl at91samdXX.cfg: update config to current OpenOCD statusTomas Vanek1-7/+1
Remove comment about workaround of not working 'reset halt' - not needed as 'reset halt' is working as expected @ EDBG with srst_only. Add srst_pulls_trst to reset_config as it no more triggers an error. Change-Id: I47cf445690c46ccfb866900cddbfcaefc8649f82 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3722 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-11-06Remove support for the GPL incompatible FTDI D2XX libraryAndreas Fritiofson14-1031/+44
Convert Presto, OpenJTAG and USB-Blaster (I) adapter drivers to libftdi only. Change-Id: Ib28887620a3dcbb754b9dbf87b9731acca3ac600 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3237 Tested-by: jenkins Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-06Remove since long deprecated ft2232 driverAndreas Fritiofson62-5372/+13
Purge all legacy interface configurations so there's no more confusion over which one to use. Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just duplicates what INSTALL says. Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3236 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-05Fix autogen.sh invocation of libjaylinkMarc Schink2-1/+7
Move autogen.sh invocation of libjaylink from the configure to the bootstrap script because the configure script is included in tarball releases but autotools are not required to be available on end-user machines. Thanks to Paul Fertser for spotting this. Change-Id: I5489ae83885157a01803eed51a7328e47d67ea6d Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3569 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05configure.ac: Fix J-Link adapter descriptionMarc Schink1-1/+1
The J-Link driver is not JTAG only and the correct spelling of the company is "SEGGER". Change-Id: Ic1062247d3bf0d564960f1ac6dfc86ffb34593e0 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3530 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05drivers/Makefile.am: Fix libjaylink integrationMarc Schink1-0/+2
Include libjaylink in DIST_SUBDIRS only if J-Link driver is enabled. Change-Id: Ib32bb6a5d8fe9bb6e93d968802733eb4973f2c25 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3529 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05configure.ac: Fix libjaylink integrationMarc Schink3-20/+23
Do not configure internal libjaylink if libusb-1.0 is not available or if J-Link driver is disabled (--disable-jlink). Change-Id: I021bca91dbbc33888a997c664f7836225306c3ef Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3528 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-05Replace "daemon" with "server" in user-visible stringsPaul Fertser2-12/+12
Since OpenOCD doesn't fit most common definitions of the word "daemon", using it in the documentation is confusing. Reported by IRC user ohsix. Change-Id: I688d722771b084b17c2a7af8e83fd64bab6141b8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3634 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-11-05flash at91samd, at91sam4l: fix improper use of mem_ap_ callTomas Vanek2-7/+17
Since merge of #3149 OpenOCD start with an unresponsive SAMD or SAM4L resulted in segfaults. First was in cortex_m_assert_reset (fixed by #3552), second was in samd_handle_reset_deassert() /sam4l_handle_reset_deassert(). The change replaces mem_ap_write_u32/8 by target_write_u32/8. It also takes better care about examining and polling target before debug control registers are set. It prevents lockup when 'reset halt' is issued on unresponsive cpu. Change-Id: I2516489f4771aebfc1118d174f527497b8a201ad Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3603 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-11-04flash: nor: mdr: do not mass erase when clearing INFO memoryPaul Fertser1-1/+2
The MDR parts have two kinds of memory: main (regular memory-mapped memory for code and data) and "info" (not memory-mapped). When OpenOCD is requested to erase the info memory block, it should do just that, instead of erasing everything including main memory. Change-Id: I498142ca50d4a7b669b7776180b0dbcea63a5328 Reported-by: Eldar Khayrullin <eldar.khayrullin@mail.ru> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3853 Tested-by: jenkins Reviewed-by: Eldar Khayrullin <eldar.khayrullin@mail.ru> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04flash Kinetis: Family K8x addedTomas Vanek1-0/+11
Change-Id: I8c090a6fe6c204ce20622006490f896c2a55292f Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3614 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04flash Kinetis: add cache invalidate for KLx seriesTomas Vanek1-22/+25
Change-Id: I0177a052cbc380e01405dc139538b731b4f0ed62 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3565 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04flash Kinetis: longword programming changed to flash_async_algorithmTomas Vanek4-96/+161
Change-Id: I9c40acfad37760c3dab454f2432817b2d420792d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3563 Reviewed-by: Steven Stallion <stallion@squareup.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04cortex_a/r/m: fix handling of un-examined coresMatthias Welwarsky2-10/+31
On multi-core systems, with some cores in power-down state, examination will fail for these cores. Make sure assert- and deassert_reset functions don't crash due to uninitialized variables. Change-Id: I472f8d19af2cd3c770c05f3e57a31b35a863b687 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3552 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-11-04AM335x: Disable watchdog on 'reset halt'Harald Welte1-0/+32
At least on my (phyCORE-AM335X) system, the AM335x watchdog needs to be disabled to use OpenOCD for more than 6.5 seconds after reset. Change-Id: I3d883a9f572b0ccb92f9864853a00c372e39d7f2 Signed-off-by: Harald Welte <laforge@gnumonks.org> Reviewed-on: http://openocd.zylin.com/3391 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-04semihosting armv7a: Add support for ARMv7-AAndrey Smirnov4-4/+89
Add semihosting support for ARMv7-A based processors. Tested with custom Vybrid VF610 based board and Pandaboard ES (Rev. B1) board (Cortex-A9). Change-Id: I6b896a61c1c6a1c5dcf89de834486f82dd6c80a2 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Tsung-Han Lin <tsunghan.tw@gmail.com> Reviewed-on: http://openocd.zylin.com/2908 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-11-04Tcl commands: Fix improper return status in flash commands and load_image.HarishKumar3-6/+9
Nand write command : nand_fileio_cleanup() always returns ERROR_OK. Due to this, handle_nand_write_command() retuns ERROR_OK in the case of nand failure. ERROR_FAIL should be returned. Flash erase_sector command : handle_flash_erase_command() always returns ERROR_OK even if the erase functionality of actual driver implementation fails. retval value should be returned. Flash write_bank command : handle_flash_write_bank_command() returns ERROR_OK even if fileio_open() and fileio_read fails. ERROR_FAIL should be returned. Load_image command : handle_load_image_command() retuns ERROR_OK even if image_open() fails. ERROR_FAIL should be returned. When the buffer is null, breaking the loop without setting retval = ERROR_FAIL would cause load_image to return ERROR_OK. Change-Id: Ice32f6036971ab5e8e4dd65edf54b394b001c80c Signed-off-by: HarishKumar <harishpresent@gmail.com> Reviewed-on: http://openocd.zylin.com/2431 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-11-04cfg: Don't check BS TAP IDCODE in STM32 configsAndreas Fritiofson7-133/+7
Instead of updating these regularly we can just accept any IDCODE for the boundary scan TAP. The only downside might be that it's not immediately obvious if you source a config for the wrong type of STM32. Change-Id: I96d4d81699a491b3a46de3f0d3fd078ffddad4e4 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3385 Tested-by: jenkins
2016-11-04tcl/board: Add board configuration for nRF51-DK, and nRF52-DK.Rick Foos2-0/+18
Both boards use SEGGER interface. nRF52 flash driver is in change 3511. The board files were needed for transport select to SWD. The default jtag transport didn't failover to SWD. Change-Id: Id9c72aa88eeeb6a4e1999ee182f5284dbe535c05 Signed-off-by: Rick Foos <rfoos@solengtech.com> Reviewed-on: http://openocd.zylin.com/3600 Tested-by: jenkins Reviewed-by: Fredrik Hederstierna <fredrik.hederstierna@gmail.com> Reviewed-by: Michael Dietz <mjdietzx@gmail.com> Reviewed-by: Jiří Pinkava <j-pi@seznam.cz> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04Make OpenOCD build using -Og.Tim Newsome4-9/+9
With -Og gcc doesn't perform as many optimizations, and as a result warns about some code that it wouldn't otherwise warn about. These fixes all assign values to otherwise uninitialized variables. Change-Id: I9a6ea5eadd73673891ecfec568b8b00d78b596a5 Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/3779 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-11-04nrf51: show proper part numberJiří Pinkava1-3/+42
Change-Id: I3e8169eb577888ee54541a1e864a8ad5a9a7cfd1 Signed-off-by: Jiří Pinkava <j-pi@seznam.cz> Reviewed-on: http://openocd.zylin.com/3733 Tested-by: jenkins Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com> Reviewed-by: Michael Dietz <mjdietzx@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-10-30Perform small writes before sending OK.Tim Newsome1-10/+27
To speed up downloads, OpenOCD sends gdb OK when a write is received, even before the write has actually occurred. The failure is then returned for the next write. That leads to the following confusing behavior: ``` (gdb) p/x *((int*)0xdeadbeef)=8675309 $2 = 0x845fed (gdb) p/x *((int*)0x80000000)=6874742 Cannot access memory at address 0x80000000 ``` While it's actually the first write that failed. This change hacks around this problem by not sending OK for small writes (len<8) until the write has actually occurred. This does not impact download speed, since during downloads (almost) all writes will have much larger length. Change-Id: I1f8b9bb19b0707487f840df6871e372e4ba228dd Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/3803 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-30flash: nor: lpc2000: handle lpc11xx parts with more than 96k memoryPaul Fertser1-3/+12
Known big flash parts such as LPC11u68/e68 have a non-uniform memory organisation, the first 24 sectors are 4k, the rest are 32k. Change-Id: Icf515152dfc54ec0ca187561d2d63088b9640f14 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3802 Tested-by: jenkins Reviewed-by: akaWolf Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-10-30flash/nor: Add erased_value to drivers and pass it to targetsAndreas Färber16-171/+61
struct flash_driver has a default_padded_value field that is similar, but it can be changed by the user for the specific purpose of padding. Add a new erased_value field and initialize it for all targets, particularly stm32lx, xmc4xxx and virtual. Use this value in core.c:default_flash_mem_blank_check(), the slow path. Extend the target API to pass erased_value down to target code. Adding an argument ensures that we catch all callers. This allows us to merge xmc4xxx.c:xmc4xxx_blank_check_memory() into armv7m:armv7m_blank_check_memory(). It further allows us to use default_flash_blank_check() in place of xmc4xxx.c:xmc4xxx_flash_blank_check(), adding a potential slow path fallback, as well as stm32lx:stm32lx_erase_check(), adding the potential armv7m fast path with fallback to default_flash_mem_blank_check(). Fix a mips32 code comment while at it (zeroed -> erased). The armv4_5 and mips32 target implementations will now error out if an erase value other than 0xff is used, causing default_flash_blank_check() to fall back to the default_flank_mem_blank_check() slow path. Change-Id: I39323fbbc4b71c256cd567e439896d0245d4745f Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3497 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-30atsamv: Support for ATSAMS70N19 Memory ConfigurationGabrielle Trotter1-0/+3
Change-Id: I3c17fcb7ee053f92aa583149bea7b8e33b3b86f7 Signed-off-by: gtrotter@bulogics.com Reviewed-on: http://openocd.zylin.com/3834 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-17helper: Make unhexify() robust on invalid dataMarc Schink5-14/+39
The current implementation is not suitable for user provided data because it does not detect invalid inputs in many cases. For example, the string "aa0xbb" is successfully converted to the 3 bytes: 0xaa, 0x00 and 0xbb. An other example is "aabi" which is successfully converted to the 2 bytes: 0xaa and 0x0b. Both are obviously incorrect. Make unhexify() robust on invalid data and use more appropriate data types for its parameters. Also, add a small documentation for the function. Change-Id: Idb799beb86fc608b066c8a76365021ed44c7f890 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3792 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-17target: Clean up format stringsAndreas Färber1-23/+23
Clean up some type casts and misuses of format specifiers in preparation for target address type changes. Change-Id: Idf08286f41bca636e35a09e8ddc1d71af3d6e151 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3717 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-17target: Add missing spaces in error messagesAndreas Färber1-6/+6
Insert a space before parenthesis in logs that we will need to touch for 64-bit target addresses. While at it, do a couple more surrounding whitespace fixes. Change-Id: I1080c0470aab51cf7bd56e67e934344d0bf4c5c1 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3716 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-10-17breakpoints: Add missing space in error messageAndreas Färber1-1/+1
A space after the format specifier was missing. Change-Id: Ib67eb0fb0d6e05d765206d30d5e4a74cb41bb47b Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3715 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-17target: Fix working_area_phys_spec commentAndreas Färber1-1/+1
working_area_phys_spec clearly refers to the physical, not virtual address. Change-Id: I639ea00bb5d05e845b8a56815a571375849f1225 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3714 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-10-17jtag: drivers: mpsse: ignore error to detach kernel driverPaul Fertser1-2/+2
This makes it possible to run OpenOCD as unprivileged user on FreeBSD. Change-Id: If1182d09ad2d51f370ae7e6da02f19c7a21c66c9 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3800 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-17jtag: drivers: cmsis-dap: add TRST handlingPaul Fertser1-8/+24
Even when TRST and SRST are not present in reset_config we still should set them appropriately (to 1) as we can't tristate them anyhow. Change-Id: Iec5bcf09340136f5e6ccfb05fa2697c53fa6609f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3798 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-17flash Kinetis: fix mdm check_security regression in JTAG modeTomas Vanek1-1/+4
Commit 6d5b4d709cb05e8daf0350ac507b928da95d0abb causes failed assert when JTAG transport is selected: src/target/arm_adi_v5.h:346: dap_queue_ap_read: Assertion `ap->dap->ops != ((void *)0)' failed. As check_security runs early in examine-start event, dap->ops must be checked. Change-Id: Ibd8312a3c668fbce834eed9790eabeed794117aa Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3712 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-17tcl/board: add Linksys WAG200G configVivien Didelot2-0/+28
The Linksys WAG200G router has a TI AR7 SoC and a 4MB Flash layout similar to the Netgear DG834v3 router [1]. Below is an example of a successful flash recovery, using a TUMPA, connected to the MIPS EJTAG 2.6 header (JP102) of the router. WAG200G [2] TUMPA [3] Desc Pin Pin Desc ------------------------ nTRST 1 3 nTRST TDI 3 5 TDI TDO 5 13 TDO TMS 7 7 TMS TCK 9 9 TCK nSRST 11 15 RST GND 2 4 GND Note that nSRST is optional to halt the CPU, but is required to probe the flash. For instance, recover the kernel with: $ sudo ./src/openocd -s tcl \ -f interface/ftdi/tumpa.cfg \ -f tools/firmware-recovery.tcl \ -c 'board linksys-wag200g; reset_config srst_only; flash_part kernel /path/to/kernel.bin; shutdown' [1] https://wiki.openwrt.org/toh/linksys/wag200g [2] https://www.linux-mips.org/wiki/JTAG#JTAG_headers [3] http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User's_Manual#20_PIN_JTAG_Connector Change-Id: I952ba9f706e2e4f8f95ca03a5fa58f391ca030b6 Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-on: http://openocd.zylin.com/3776 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-17tcl/board: add configuration for Novena's integrated FPGASean Cross1-0/+25
Change-Id: Iecd57c0ef59cfde98de36464a73436f57b0835e2 Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3532 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-17gdb server: Add back support to disable the gdb server via the gdb_port configSandeep Mistry2-2/+7
As per the documentation, used "disabled" as the value to disable, as this is the same value to disable the telnet and tcl server. Change-Id: Idc4a8580098ec1107dcc6e1f59e817ecdebc38ac Signed-off-by: Sandeep Mistry <s.mistry@arduino.cc> Reviewed-on: http://openocd.zylin.com/3175 Tested-by: jenkins Reviewed-by: Cristian Maglie Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-07libjaylink: Update for API changesMarc Schink2-19/+38
Update to latest libjaylink version and incorporate API changes. The major change in libjaylink is a rework of the device discovery. Please test device discovery extensively, especially with multiple devices connected. All other changes in libjaylink are of minor importance for OpenOCD. Change-Id: I9a50e83f59557505ce29809c7762c5df1cec10eb Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3735 Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Steven Stallion <stallion@squareup.com> Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-10-07jlink: Adjust log verbosity of libjaylinkMarc Schink1-0/+38
Currently, the log verbosity of libjaylink is not accessible from the user interface. Therefore, changing the log verbosity of libjaylink is only possible from within the J-Link driver source code which is not acceptable for end users. Output the libjaylink log messages through the logging module of OpenOCD rather than directly to stderr. Change-Id: I6bf7bf8f4c8a12fb9e955eeced68224545fa0b5c Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3701 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-10-07helper/log: Add log_vprintf_lf()Marc Schink2-14/+27
Add log_vprintf_lf() to enable the possibility to output log messages with a variable argument list. Change-Id: I7fd6e93db63a7d98f662df2881a42e4d923c3848 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3709 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-10-04cortex_m: fix autoincrement range of Cortex-M7Tomas Vanek1-4/+8
Cortex-M7 has autoincrement range only 1024 bytes, surprisingly smaller than M3, M4. Change-Id: I35ff1f0e093aac4af79f98eb3b8058d4295942d1 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3737 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-04stm32f2x: Increase options write timeoutAndreas Fritiofson1-3/+6
Large flash parts time out when unlocking. Mass erase time is specified as 32 seconds worst case for some parts. Automatic mass erase is probably not using x8 parallelism, though, but a too large timeout shouldn't hurt. Also, use the new define instead of hardcoded timeout when mass erasing. Change-Id: Ib5af60d52ed7d53277bfe7176c4c44f79d3a26bc Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3738 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-04xilinx_bscan_spi: port to new migen and clean-upRobert Jordens1-193/+121
* port to new migen * streamline package/part specification * add pullup (Series3, Series6) and pullnone (Series7) for unused pins as xilinx impact/vivado do it. * specify respective toolchains * build Series7 with vivado (broader support, faster) * point to prebuilt bitstreams at https://github.com/jordens/bscan_spi_bitstreams Change-Id: Ibfef3d78f855b754425f3e6131e2e49fa111e09a Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/3173 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by: Robert Jördens Reviewed-by: William D. Jones Reviewed-by: Tim "mithro" Ansell <mithro@mithis.com>
2016-10-04nRF51: Fix bug in Code memory size.Michael Dietz1-11/+10
The code memory size was a bug and seemed to be working by accident since there happened to be 256 pages in the device that was tested on which corresponded to 256kb. Also don't fail if memory size != expected memory size based on hwid as this hwid is unstable and should be used only for debug/diagnostics. Change-Id: I4e98f7498a36c53fc51783eddfdaba704d30e3ca Signed-off-by: Michael Dietz <mjdietzx@gmail.com> Reviewed-on: http://openocd.zylin.com/3510 Tested-by: jenkins Reviewed-by: Jiří Pinkava <j-pi@seznam.cz> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-10-04ftdi: don't wait forever if we failAndreas Fritiofson1-4/+20
Currently if ftdi device is removed, OpenOCD will stall forever. Only kill -9 will help in this case. This patch makes use of libusb timeout functions and trying to break out of while loop if some error is detected. [andreas.fritiofson@gmail.com]: Add missing retval check Change-Id: I97506190e376026705f14ef9fe37dc811b99b3ac Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3419 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins
2016-10-04nds32: Fix typo in debug logAndreas Färber3-6/+6
wathcpoint -> watchpoint Change-Id: If84cfb5097ed17ef97491667c622ba7d870ac9c2 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3673 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-10-04x86_32_common: Fix typo in function nameAndreas Färber1-7/+7
pyhs -> phys Change-Id: Ie7edc74f1693b42f26e1e8475a93a7a6b9255cdd Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3672 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
generated by cgit v1.1 at 2024-09-27 21:18:46 +0000