aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nor/cfi.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/flash/nor/cfi.c')
-rw-r--r--src/flash/nor/cfi.c1700
1 files changed, 767 insertions, 933 deletions
diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c
index 9863379..0d8c694 100644
--- a/src/flash/nor/cfi.c
+++ b/src/flash/nor/cfi.c
@@ -21,6 +21,7 @@
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
@@ -35,19 +36,17 @@
#include <helper/binarybuffer.h>
#include <target/algorithm.h>
-
-#define CFI_MAX_BUS_WIDTH 4
-#define CFI_MAX_CHIP_WIDTH 4
+#define CFI_MAX_BUS_WIDTH 4
+#define CFI_MAX_CHIP_WIDTH 4
/* defines internal maximum size for code fragment in cfi_intel_write_block() */
#define CFI_MAX_INTEL_CODESIZE 256
/* some id-types with specific handling */
-#define AT49BV6416 0x00d6
-#define AT49BV6416T 0x00d2
+#define AT49BV6416 0x00d6
+#define AT49BV6416T 0x00d2
-static struct cfi_unlock_addresses cfi_unlock_addresses[] =
-{
+static struct cfi_unlock_addresses cfi_unlock_addresses[] = {
[CFI_UNLOCK_555_2AA] = { .unlock1 = 0x555, .unlock2 = 0x2aa },
[CFI_UNLOCK_5555_2AAA] = { .unlock1 = 0x5555, .unlock2 = 0x2aaa },
};
@@ -60,23 +59,36 @@ static void cfi_fixup_0002_write_buffer(struct flash_bank *bank, void *param);
/* fixup after reading cmdset 0002 primary query table */
static const struct cfi_fixup cfi_0002_fixups[] = {
- {CFI_MFR_SST, 0x00D4, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
- {CFI_MFR_SST, 0x00D5, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
- {CFI_MFR_SST, 0x00D6, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
- {CFI_MFR_SST, 0x00D7, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
- {CFI_MFR_SST, 0x2780, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
- {CFI_MFR_SST, 0x274b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
- {CFI_MFR_SST, 0x236d, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
+ {CFI_MFR_SST, 0x00D4, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x00D5, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x00D6, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x00D7, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x2780, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x274b, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x236d, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
{CFI_MFR_ATMEL, 0x00C8, cfi_fixup_reversed_erase_regions, NULL},
- {CFI_MFR_ST, 0x22C4, cfi_fixup_reversed_erase_regions, NULL}, /* M29W160ET */
- {CFI_MFR_FUJITSU, 0x22ea, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
- {CFI_MFR_FUJITSU, 0x226b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
- {CFI_MFR_AMIC, 0xb31a, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
- {CFI_MFR_MX, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
- {CFI_MFR_EON, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
- {CFI_MFR_AMD, 0x225b, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
+ {CFI_MFR_ST, 0x22C4, cfi_fixup_reversed_erase_regions, NULL}, /* M29W160ET */
+ {CFI_MFR_FUJITSU, 0x22ea, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
+ {CFI_MFR_FUJITSU, 0x226b, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_AMIC, 0xb31a, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
+ {CFI_MFR_MX, 0x225b, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
+ {CFI_MFR_EON, 0x225b, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
+ {CFI_MFR_AMD, 0x225b, cfi_fixup_0002_unlock_addresses,
+ &cfi_unlock_addresses[CFI_UNLOCK_555_2AA]},
{CFI_MFR_ANY, CFI_ID_ANY, cfi_fixup_0002_erase_regions, NULL},
- {CFI_MFR_ST, 0x227E, cfi_fixup_0002_write_buffer, NULL}, /* M29W128G */
+ {CFI_MFR_ST, 0x227E, cfi_fixup_0002_write_buffer, NULL},/* M29W128G */
{0, 0, NULL, NULL}
};
@@ -90,30 +102,26 @@ static void cfi_fixup(struct flash_bank *bank, const struct cfi_fixup *fixups)
struct cfi_flash_bank *cfi_info = bank->driver_priv;
const struct cfi_fixup *f;
- for (f = fixups; f->fixup; f++)
- {
+ for (f = fixups; f->fixup; f++) {
if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi_info->manufacturer)) &&
- ((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id)))
- {
+ ((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id)))
f->fixup(bank, f->param);
- }
}
}
/* inline uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset) */
-static __inline__ uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset)
+static inline uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- if (cfi_info->x16_as_x8) offset *= 2;
+ if (cfi_info->x16_as_x8)
+ offset *= 2;
/* while the sector list isn't built, only accesses to sector 0 work */
if (sector == 0)
return bank->base + offset * bank->bus_width;
- else
- {
- if (!bank->sectors)
- {
+ else {
+ if (!bank->sectors) {
LOG_ERROR("BUG: sector list not yet built");
exit(-1);
}
@@ -131,19 +139,12 @@ static void cfi_command(struct flash_bank *bank, uint8_t cmd, uint8_t *cmd_buf)
for (i = 0; i < CFI_MAX_BUS_WIDTH; i++)
cmd_buf[i] = 0;
- if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
- {
+ if (bank->target->endianness == TARGET_LITTLE_ENDIAN) {
for (i = bank->bus_width; i > 0; i--)
- {
*cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
- }
- }
- else
- {
+ } else {
for (i = 1; i <= bank->bus_width; i++)
- {
*cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
- }
}
}
@@ -194,15 +195,12 @@ static int cfi_get_u8(struct flash_bank *bank, int sector, uint32_t offset, uint
if (retval != ERROR_OK)
return retval;
- if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
- {
+ if (bank->target->endianness == TARGET_LITTLE_ENDIAN) {
for (i = 0; i < bank->bus_width / bank->chip_width; i++)
data[0] |= data[i];
*val = data[0];
- }
- else
- {
+ } else {
uint8_t value = 0;
for (i = 0; i < bank->bus_width / bank->chip_width; i++)
value |= data[bank->bus_width - 1 - i];
@@ -219,18 +217,15 @@ static int cfi_query_u16(struct flash_bank *bank, int sector, uint32_t offset, u
uint8_t data[CFI_MAX_BUS_WIDTH * 2];
int retval;
- if (cfi_info->x16_as_x8)
- {
+ if (cfi_info->x16_as_x8) {
uint8_t i;
- for (i = 0;i < 2;i++)
- {
+ for (i = 0; i < 2; i++) {
retval = target_read_memory(target, flash_address(bank, sector, offset + i),
bank->bus_width, 1, &data[i * bank->bus_width]);
if (retval != ERROR_OK)
return retval;
}
- } else
- {
+ } else {
retval = target_read_memory(target, flash_address(bank, sector, offset),
bank->bus_width, 2, data);
if (retval != ERROR_OK)
@@ -252,19 +247,15 @@ static int cfi_query_u32(struct flash_bank *bank, int sector, uint32_t offset, u
uint8_t data[CFI_MAX_BUS_WIDTH * 4];
int retval;
- if (cfi_info->x16_as_x8)
- {
+ if (cfi_info->x16_as_x8) {
uint8_t i;
- for (i = 0;i < 4;i++)
- {
+ for (i = 0; i < 4; i++) {
retval = target_read_memory(target, flash_address(bank, sector, offset + i),
bank->bus_width, 1, &data[i * bank->bus_width]);
if (retval != ERROR_OK)
return retval;
}
- }
- else
- {
+ } else {
retval = target_read_memory(target, flash_address(bank, sector, offset),
bank->bus_width, 4, data);
if (retval != ERROR_OK)
@@ -273,10 +264,11 @@ static int cfi_query_u32(struct flash_bank *bank, int sector, uint32_t offset, u
if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
*val = data[0] | data[bank->bus_width] << 8 |
- data[bank->bus_width * 2] << 16 | data[bank->bus_width * 3] << 24;
+ data[bank->bus_width * 2] << 16 | data[bank->bus_width * 3] << 24;
else
- *val = data[bank->bus_width - 1] | data[(2* bank->bus_width) - 1] << 8 |
- data[(3 * bank->bus_width) - 1] << 16 | data[(4 * bank->bus_width) - 1] << 24;
+ *val = data[bank->bus_width - 1] | data[(2 * bank->bus_width) - 1] << 8 |
+ data[(3 * bank->bus_width) - 1] << 16 |
+ data[(4 * bank->bus_width) - 1] << 24;
return ERROR_OK;
}
@@ -286,25 +278,21 @@ static int cfi_reset(struct flash_bank *bank)
struct cfi_flash_bank *cfi_info = bank->driver_priv;
int retval = ERROR_OK;
- if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
if (cfi_info->manufacturer == 0x20 &&
- (cfi_info->device_id == 0x227E || cfi_info->device_id == 0x7E))
- {
+ (cfi_info->device_id == 0x227E || cfi_info->device_id == 0x7E)) {
/* Numonix M29W128G is cmd 0xFF intolerant - causes internal undefined state
* so we send an extra 0xF0 reset to fix the bug */
- if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x00))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x00));
+ if (retval != ERROR_OK)
return retval;
- }
}
return retval;
@@ -321,10 +309,8 @@ static int cfi_intel_wait_status_busy(struct flash_bank *bank, int timeout, uint
int retval = ERROR_OK;
- for (;;)
- {
- if (timeout-- < 0)
- {
+ for (;; ) {
+ if (timeout-- < 0) {
LOG_ERROR("timeout while waiting for WSM to become ready");
return ERROR_FAIL;
}
@@ -344,8 +330,7 @@ static int cfi_intel_wait_status_busy(struct flash_bank *bank, int timeout, uint
LOG_DEBUG("status: 0x%x", status);
- if (status != 0x80)
- {
+ if (status != 0x80) {
LOG_ERROR("status register: 0x%x", status);
if (status & 0x2)
LOG_ERROR("Block Lock-Bit Detected, Operation Abort");
@@ -395,15 +380,15 @@ static int cfi_spansion_wait_status_busy(struct flash_bank *bank, int timeout)
return retval;
if ((status ^ oldstatus) & 0x40) {
LOG_ERROR("dq5 timeout, status: 0x%x", status);
- return(ERROR_FLASH_OPERATION_FAILED);
+ return ERROR_FLASH_OPERATION_FAILED;
} else {
LOG_DEBUG("status: 0x%x", status);
- return(ERROR_OK);
+ return ERROR_OK;
}
}
- } else { /* no toggle: finished, OK */
+ } else {/* no toggle: finished, OK */
LOG_DEBUG("status: 0x%x", status);
- return(ERROR_OK);
+ return ERROR_OK;
}
oldstatus = status;
@@ -412,7 +397,7 @@ static int cfi_spansion_wait_status_busy(struct flash_bank *bank, int timeout)
LOG_ERROR("timeout, status: 0x%x", status);
- return(ERROR_FLASH_BUSY);
+ return ERROR_FLASH_BUSY;
}
static int cfi_read_intel_pri_ext(struct flash_bank *bank)
@@ -425,8 +410,7 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank)
free(cfi_info->pri_ext);
pri_ext = malloc(sizeof(struct cfi_intel_pri_ext));
- if (pri_ext == NULL)
- {
+ if (pri_ext == NULL) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
@@ -442,12 +426,10 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank)
if (retval != ERROR_OK)
return retval;
- if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
- {
- if ((retval = cfi_reset(bank)) != ERROR_OK)
- {
+ if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I')) {
+ retval = cfi_reset(bank);
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("Could not read bank flash bank information");
return ERROR_FLASH_BANK_INVALID;
}
@@ -460,7 +442,7 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank)
return retval;
LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1],
- pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
+ pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
retval = cfi_query_u32(bank, 0, cfi_info->pri_addr + 5, &pri_ext->feature_support);
if (retval != ERROR_OK)
@@ -473,10 +455,10 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank)
return retval;
LOG_DEBUG("feature_support: 0x%" PRIx32 ", suspend_cmd_support: "
- "0x%x, blk_status_reg_mask: 0x%x",
- pri_ext->feature_support,
- pri_ext->suspend_cmd_support,
- pri_ext->blk_status_reg_mask);
+ "0x%x, blk_status_reg_mask: 0x%x",
+ pri_ext->feature_support,
+ pri_ext->suspend_cmd_support,
+ pri_ext->blk_status_reg_mask);
retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc, &pri_ext->vcc_optimal);
if (retval != ERROR_OK)
@@ -486,16 +468,15 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank)
return retval;
LOG_DEBUG("Vcc opt: %x.%x, Vpp opt: %u.%x",
- (pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
- (pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
+ (pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
+ (pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xe, &pri_ext->num_protection_fields);
if (retval != ERROR_OK)
return retval;
- if (pri_ext->num_protection_fields != 1)
- {
+ if (pri_ext->num_protection_fields != 1) {
LOG_WARNING("expected one protection register field, but found %i",
- pri_ext->num_protection_fields);
+ pri_ext->num_protection_fields);
}
retval = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xf, &pri_ext->prot_reg_addr);
@@ -509,9 +490,9 @@ static int cfi_read_intel_pri_ext(struct flash_bank *bank)
return retval;
LOG_DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, "
- "factory pre-programmed: %i, user programmable: %i",
- pri_ext->num_protection_fields, pri_ext->prot_reg_addr,
- 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
+ "factory pre-programmed: %i, user programmable: %i",
+ pri_ext->num_protection_fields, pri_ext->prot_reg_addr,
+ 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
return ERROR_OK;
}
@@ -526,8 +507,7 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank)
free(cfi_info->pri_ext);
pri_ext = malloc(sizeof(struct cfi_spansion_pri_ext));
- if (pri_ext == NULL)
- {
+ if (pri_ext == NULL) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
@@ -543,12 +523,10 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank)
if (retval != ERROR_OK)
return retval;
- if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
- {
- if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I')) {
+ retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("Could not read spansion bank information");
return ERROR_FLASH_BANK_INVALID;
}
@@ -561,7 +539,7 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank)
return retval;
LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1],
- pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
+ pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5, &pri_ext->SiliconRevision);
if (retval != ERROR_OK)
@@ -598,18 +576,18 @@ static int cfi_read_spansion_pri_ext(struct flash_bank *bank)
return retval;
LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x",
- pri_ext->SiliconRevision, pri_ext->EraseSuspend, pri_ext->BlkProt);
+ pri_ext->SiliconRevision, pri_ext->EraseSuspend, pri_ext->BlkProt);
LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, "
- "Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
- pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps);
+ "Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
+ pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps);
LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
LOG_DEBUG("Vpp min: %u.%x, Vpp max: %u.%x",
- (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
- (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+ (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
+ (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
LOG_DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
@@ -632,8 +610,7 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank)
free(cfi_info->pri_ext);
pri_ext = malloc(sizeof(struct cfi_spansion_pri_ext));
- if (pri_ext == NULL)
- {
+ if (pri_ext == NULL) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
@@ -658,12 +635,10 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank)
return retval;
if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R')
- || (atmel_pri_ext.pri[2] != 'I'))
- {
- if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ || (atmel_pri_ext.pri[2] != 'I')) {
+ retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("Could not read atmel bank information");
return ERROR_FLASH_BANK_INVALID;
}
@@ -680,8 +655,8 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank)
return retval;
LOG_DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0],
- atmel_pri_ext.pri[1], atmel_pri_ext.pri[2],
- atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
+ atmel_pri_ext.pri[1], atmel_pri_ext.pri[2],
+ atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
pri_ext->major_version = atmel_pri_ext.major_version;
pri_ext->minor_version = atmel_pri_ext.minor_version;
@@ -699,16 +674,19 @@ static int cfi_read_atmel_pri_ext(struct flash_bank *bank)
if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
- atmel_pri_ext.features, atmel_pri_ext.bottom_boot,
- atmel_pri_ext.burst_mode, atmel_pri_ext.page_mode);
+ LOG_DEBUG(
+ "features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
+ atmel_pri_ext.features,
+ atmel_pri_ext.bottom_boot,
+ atmel_pri_ext.burst_mode,
+ atmel_pri_ext.page_mode);
if (atmel_pri_ext.features & 0x02)
pri_ext->EraseSuspend = 2;
/* some chips got it backwards... */
if (cfi_info->device_id == AT49BV6416 ||
- cfi_info->device_id == AT49BV6416T) {
+ cfi_info->device_id == AT49BV6416T) {
if (atmel_pri_ext.bottom_boot)
pri_ext->TopBottom = 3;
else
@@ -731,13 +709,9 @@ static int cfi_read_0002_pri_ext(struct flash_bank *bank)
struct cfi_flash_bank *cfi_info = bank->driver_priv;
if (cfi_info->manufacturer == CFI_MFR_ATMEL)
- {
return cfi_read_atmel_pri_ext(bank);
- }
else
- {
return cfi_read_spansion_pri_ext(bank);
- }
}
static int cfi_spansion_info(struct flash_bank *bank, char *buf, int buf_size)
@@ -769,8 +743,8 @@ static int cfi_spansion_info(struct flash_bank *bank, char *buf, int buf_size)
buf_size -= printed;
snprintf(buf, buf_size, "VppMin: %u.%x, VppMax: %u.%x\n",
- (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
- (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+ (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
+ (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
return ERROR_OK;
}
@@ -785,14 +759,24 @@ static int cfi_intel_info(struct flash_bank *bank, char *buf, int buf_size)
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0],
- pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
+ printed = snprintf(buf,
+ buf_size,
+ "pri: '%c%c%c', version: %c.%c\n",
+ pri_ext->pri[0],
+ pri_ext->pri[1],
+ pri_ext->pri[2],
+ pri_ext->major_version,
+ pri_ext->minor_version);
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "feature_support: 0x%" PRIx32 ", "
+ printed = snprintf(buf,
+ buf_size,
+ "feature_support: 0x%" PRIx32 ", "
"suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n",
- pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
+ pri_ext->feature_support,
+ pri_ext->suspend_cmd_support,
+ pri_ext->blk_status_reg_mask);
buf += printed;
buf_size -= printed;
@@ -803,9 +787,9 @@ static int cfi_intel_info(struct flash_bank *bank, char *buf, int buf_size)
buf_size -= printed;
snprintf(buf, buf_size, "protection_fields: %i, prot_reg_addr: 0x%x, "
- "factory pre-programmed: %i, user programmable: %i\n",
- pri_ext->num_protection_fields, pri_ext->prot_reg_addr,
- 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
+ "factory pre-programmed: %i, user programmable: %i\n",
+ pri_ext->num_protection_fields, pri_ext->prot_reg_addr,
+ 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
return ERROR_OK;
}
@@ -817,9 +801,7 @@ FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command)
struct cfi_flash_bank *cfi_info;
if (CMD_ARGC < 6)
- {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
/* both widths must:
* - not exceed max value;
@@ -832,8 +814,7 @@ FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command)
|| (bank->bus_width == 0)
|| (bank->chip_width & (bank->chip_width - 1))
|| (bank->bus_width & (bank->bus_width - 1))
- || (bank->chip_width > bank->bus_width))
- {
+ || (bank->chip_width > bank->bus_width)) {
LOG_ERROR("chip and bus width have to specified in bytes");
return ERROR_FLASH_BANK_INVALID;
}
@@ -850,16 +831,11 @@ FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command)
cfi_info->jedec_probe = 0;
cfi_info->not_cfi = 0;
- for (unsigned i = 6; i < CMD_ARGC; i++)
- {
+ for (unsigned i = 6; i < CMD_ARGC; i++) {
if (strcmp(CMD_ARGV[i], "x16_as_x8") == 0)
- {
cfi_info->x16_as_x8 = 1;
- }
else if (strcmp(CMD_ARGV[i], "jedec_probe") == 0)
- {
cfi_info->jedec_probe = 1;
- }
}
cfi_info->write_algorithm = NULL;
@@ -878,17 +854,14 @@ static int cfi_intel_erase(struct flash_bank *bank, int first, int last)
cfi_intel_clear_status_register(bank);
- for (i = first; i <= last; i++)
- {
- if ((retval = cfi_send_command(bank, 0x20, flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ for (i = first; i <= last; i++) {
+ retval = cfi_send_command(bank, 0x20, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
uint8_t status;
retval = cfi_intel_wait_status_busy(bank, cfi_info->block_erase_timeout, &status);
@@ -897,14 +870,14 @@ static int cfi_intel_erase(struct flash_bank *bank, int first, int last)
if (status == 0x80)
bank->sectors[i].is_erased = 1;
- else
- {
- if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ else {
+ retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
- LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32 , i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base 0x%" PRIx32,
+ i,
+ bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
@@ -919,85 +892,63 @@ static int cfi_spansion_erase(struct flash_bank *bank, int first, int last)
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
int i;
- for (i = first; i <= last; i++)
- {
- if ((retval = cfi_send_command(bank, 0xaa,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ for (i = first; i <= last; i++) {
+ retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x55,
- flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x80,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x80, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0xaa,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x55,
- flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x30,
- flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x30, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
if (cfi_spansion_wait_status_busy(bank, cfi_info->block_erase_timeout) == ERROR_OK)
- {
bank->sectors[i].is_erased = 1;
- }
- else
- {
- if ((retval = cfi_send_command(bank, 0xf0,
- flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ else {
+ retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("couldn't erase block %i of flash bank at base 0x%"
- PRIx32, i, bank->base);
+ PRIx32, i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
- return cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ return cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
}
static int cfi_erase(struct flash_bank *bank, int first, int last)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
return ERROR_FLASH_SECTOR_INVALID;
- }
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
- switch (cfi_info->pri_id)
- {
+ switch (cfi_info->pri_id) {
case 1:
case 3:
return cfi_intel_erase(bank, first, last);
@@ -1024,67 +975,54 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la
/* if the device supports neither legacy lock/unlock (bit 3) nor
* instant individual block locking (bit 5).
*/
- if (!(pri_ext->feature_support & 0x28))
- {
+ if (!(pri_ext->feature_support & 0x28)) {
LOG_ERROR("lock/unlock not supported on flash");
return ERROR_FLASH_OPERATION_FAILED;
}
cfi_intel_clear_status_register(bank);
- for (i = first; i <= last; i++)
- {
- if ((retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ for (i = first; i <= last; i++) {
+ retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
- if (set)
- {
- if ((retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ if (set) {
+ retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
bank->sectors[i].is_protected = 1;
- }
- else
- {
- if ((retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ } else {
+ retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
bank->sectors[i].is_protected = 0;
}
- /* instant individual block locking doesn't require reading of the status register */
- if (!(pri_ext->feature_support & 0x20))
- {
+ /* instant individual block locking doesn't require reading of the status register
+ **/
+ if (!(pri_ext->feature_support & 0x20)) {
/* Clear lock bits operation may take up to 1.4s */
uint8_t status;
retval = cfi_intel_wait_status_busy(bank, 1400, &status);
if (retval != ERROR_OK)
return retval;
- }
- else
- {
+ } else {
uint8_t block_status;
/* read block lock bit, to verify status */
- if ((retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55));
+ if (retval != ERROR_OK)
return retval;
- }
retval = cfi_get_u8(bank, i, 0x2, &block_status);
if (retval != ERROR_OK)
return retval;
- if ((block_status & 0x1) != set)
- {
- LOG_ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)",
- set, block_status);
- if ((retval = cfi_send_command(bank, 0x70,
- flash_address(bank, 0, 0x55))) != ERROR_OK)
- {
+ if ((block_status & 0x1) != set) {
+ LOG_ERROR(
+ "couldn't change block lock status (set = %i, block_status = 0x%2.2x)",
+ set, block_status);
+ retval = cfi_send_command(bank, 0x70, flash_address(bank, 0, 0x55));
+ if (retval != ERROR_OK)
return retval;
- }
uint8_t status;
retval = cfi_intel_wait_status_busy(bank, 10, &status);
if (retval != ERROR_OK)
@@ -1092,8 +1030,7 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la
if (retry > 10)
return ERROR_FLASH_OPERATION_FAILED;
- else
- {
+ else {
i--;
retry++;
}
@@ -1104,8 +1041,7 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la
/* if the device doesn't support individual block lock bits set/clear,
* all blocks have been unlocked in parallel, so we set those that should be protected
*/
- if ((!set) && (!(pri_ext->feature_support & 0x20)))
- {
+ if ((!set) && (!(pri_ext->feature_support & 0x20))) {
/* FIX!!! this code path is broken!!!
*
* The correct approach is:
@@ -1117,23 +1053,17 @@ static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int la
* 3. re-protect what should be protected.
*
*/
- for (i = 0; i < bank->num_sectors; i++)
- {
- if (bank->sectors[i].is_protected == 1)
- {
+ for (i = 0; i < bank->num_sectors; i++) {
+ if (bank->sectors[i].is_protected == 1) {
cfi_intel_clear_status_register(bank);
- if ((retval = cfi_send_command(bank, 0x60,
- flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x01,
- flash_address(bank, i, 0x0))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
uint8_t status;
retval = cfi_intel_wait_status_busy(bank, 100, &status);
@@ -1150,14 +1080,12 @@ static int cfi_protect(struct flash_bank *bank, int set, int first, int last)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
LOG_ERROR("Invalid sector range");
return ERROR_FLASH_SECTOR_INVALID;
}
@@ -1165,8 +1093,7 @@ static int cfi_protect(struct flash_bank *bank, int set, int first, int last)
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
- switch (cfi_info->pri_id)
- {
+ switch (cfi_info->pri_id) {
case 1:
case 3:
return cfi_intel_protect(bank, set, first, last);
@@ -1177,14 +1104,13 @@ static int cfi_protect(struct flash_bank *bank, int set, int first, int last)
}
}
-/* Convert code image to target endian */
-/* FIXME create general block conversion fcts in target.c?) */
+/* Convert code image to target endian
+ * FIXME create general block conversion fcts in target.c?) */
static void cfi_fix_code_endian(struct target *target, uint8_t *dest,
- const uint32_t *src, uint32_t count)
+ const uint32_t *src, uint32_t count)
{
uint32_t i;
- for (i = 0; i< count; i++)
- {
+ for (i = 0; i < count; i++) {
target_buffer_set_u32(target, dest, *src);
dest += 4;
src++;
@@ -1197,25 +1123,25 @@ static uint32_t cfi_command_val(struct flash_bank *bank, uint8_t cmd)
uint8_t buf[CFI_MAX_BUS_WIDTH];
cfi_command(bank, cmd, buf);
- switch (bank->bus_width)
- {
- case 1 :
- return buf[0];
- break;
- case 2 :
- return target_buffer_get_u16(target, buf);
- break;
- case 4 :
- return target_buffer_get_u32(target, buf);
- break;
- default :
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
- return 0;
+ switch (bank->bus_width) {
+ case 1:
+ return buf[0];
+ break;
+ case 2:
+ return target_buffer_get_u16(target, buf);
+ break;
+ case 4:
+ return target_buffer_get_u32(target, buf);
+ break;
+ default:
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ bank->bus_width);
+ return 0;
}
}
static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
- uint32_t address, uint32_t count)
+ uint32_t address, uint32_t count)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct target *target = bank->target;
@@ -1237,65 +1163,65 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
/* see contib/loaders/flash/armv4_5_cfi_intel_32.s for src */
static const uint32_t word_32_code[] = {
- 0xe4904004, /* loop: ldr r4, [r0], #4 */
- 0xe5813000, /* str r3, [r1] */
- 0xe5814000, /* str r4, [r1] */
- 0xe5914000, /* busy: ldr r4, [r1] */
- 0xe0047005, /* and r7, r4, r5 */
- 0xe1570005, /* cmp r7, r5 */
- 0x1afffffb, /* bne busy */
- 0xe1140006, /* tst r4, r6 */
- 0x1a000003, /* bne done */
- 0xe2522001, /* subs r2, r2, #1 */
- 0x0a000001, /* beq done */
- 0xe2811004, /* add r1, r1 #4 */
- 0xeafffff2, /* b loop */
- 0xeafffffe /* done: b -2 */
+ 0xe4904004, /* loop: ldr r4, [r0], #4 */
+ 0xe5813000, /* str r3, [r1] */
+ 0xe5814000, /* str r4, [r1] */
+ 0xe5914000, /* busy: ldr r4, [r1] */
+ 0xe0047005, /* and r7, r4, r5 */
+ 0xe1570005, /* cmp r7, r5 */
+ 0x1afffffb, /* bne busy */
+ 0xe1140006, /* tst r4, r6 */
+ 0x1a000003, /* bne done */
+ 0xe2522001, /* subs r2, r2, #1 */
+ 0x0a000001, /* beq done */
+ 0xe2811004, /* add r1, r1 #4 */
+ 0xeafffff2, /* b loop */
+ 0xeafffffe /* done: b -2 */
};
/* see contib/loaders/flash/armv4_5_cfi_intel_16.s for src */
static const uint32_t word_16_code[] = {
- 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
- 0xe1c130b0, /* strh r3, [r1] */
- 0xe1c140b0, /* strh r4, [r1] */
- 0xe1d140b0, /* busy ldrh r4, [r1] */
- 0xe0047005, /* and r7, r4, r5 */
- 0xe1570005, /* cmp r7, r5 */
- 0x1afffffb, /* bne busy */
- 0xe1140006, /* tst r4, r6 */
- 0x1a000003, /* bne done */
- 0xe2522001, /* subs r2, r2, #1 */
- 0x0a000001, /* beq done */
- 0xe2811002, /* add r1, r1 #2 */
- 0xeafffff2, /* b loop */
- 0xeafffffe /* done: b -2 */
+ 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
+ 0xe1c130b0, /* strh r3, [r1] */
+ 0xe1c140b0, /* strh r4, [r1] */
+ 0xe1d140b0, /* busy ldrh r4, [r1] */
+ 0xe0047005, /* and r7, r4, r5 */
+ 0xe1570005, /* cmp r7, r5 */
+ 0x1afffffb, /* bne busy */
+ 0xe1140006, /* tst r4, r6 */
+ 0x1a000003, /* bne done */
+ 0xe2522001, /* subs r2, r2, #1 */
+ 0x0a000001, /* beq done */
+ 0xe2811002, /* add r1, r1 #2 */
+ 0xeafffff2, /* b loop */
+ 0xeafffffe /* done: b -2 */
};
/* see contib/loaders/flash/armv4_5_cfi_intel_8.s for src */
static const uint32_t word_8_code[] = {
- 0xe4d04001, /* loop: ldrb r4, [r0], #1 */
- 0xe5c13000, /* strb r3, [r1] */
- 0xe5c14000, /* strb r4, [r1] */
- 0xe5d14000, /* busy ldrb r4, [r1] */
- 0xe0047005, /* and r7, r4, r5 */
- 0xe1570005, /* cmp r7, r5 */
- 0x1afffffb, /* bne busy */
- 0xe1140006, /* tst r4, r6 */
- 0x1a000003, /* bne done */
- 0xe2522001, /* subs r2, r2, #1 */
- 0x0a000001, /* beq done */
- 0xe2811001, /* add r1, r1 #1 */
- 0xeafffff2, /* b loop */
- 0xeafffffe /* done: b -2 */
+ 0xe4d04001, /* loop: ldrb r4, [r0], #1 */
+ 0xe5c13000, /* strb r3, [r1] */
+ 0xe5c14000, /* strb r4, [r1] */
+ 0xe5d14000, /* busy ldrb r4, [r1] */
+ 0xe0047005, /* and r7, r4, r5 */
+ 0xe1570005, /* cmp r7, r5 */
+ 0x1afffffb, /* bne busy */
+ 0xe1140006, /* tst r4, r6 */
+ 0x1a000003, /* bne done */
+ 0xe2522001, /* subs r2, r2, #1 */
+ 0x0a000001, /* beq done */
+ 0xe2811001, /* add r1, r1 #1 */
+ 0xeafffff2, /* b loop */
+ 0xeafffffe /* done: b -2 */
};
uint8_t target_code[4*CFI_MAX_INTEL_CODESIZE];
const uint32_t *target_code_src;
uint32_t target_code_size;
int retval = ERROR_OK;
- /* todo: if ( (!is_armv7m(target_to_armv7m(target)) && (!is_arm(target_to_arm(target)) ) */
- if (strncmp(target_type_name(target),"mips_m4k",8) == 0)
- {
+ /* todo: if ( (!is_armv7m(target_to_armv7m(target)) && (!is_arm(target_to_arm(target)) )
+ **/
+ if (strncmp(target_type_name(target), "mips_m4k", 8) == 0) {
LOG_ERROR("Your target has no flash block write support yet.");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
@@ -1306,57 +1232,56 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
armv4_5_info.core_mode = ARM_MODE_SVC;
armv4_5_info.core_state = ARM_STATE_ARM;
- /* If we are setting up the write_algorith, we need target_code_src */
- /* if not we only need target_code_size. */
+ /* If we are setting up the write_algorith, we need target_code_src
+ * if not we only need target_code_size. */
- /* However, we don't want to create multiple code paths, so we */
- /* do the unecessary evaluation of target_code_src, which the */
- /* compiler will probably nicely optimize away if not needed */
+ /* However, we don't want to create multiple code paths, so we
+ * do the unecessary evaluation of target_code_src, which the
+ * compiler will probably nicely optimize away if not needed */
/* prepare algorithm code for target endian */
- switch (bank->bus_width)
- {
- case 1 :
- target_code_src = word_8_code;
- target_code_size = sizeof(word_8_code);
- break;
- case 2 :
- target_code_src = word_16_code;
- target_code_size = sizeof(word_16_code);
- break;
- case 4 :
- target_code_src = word_32_code;
- target_code_size = sizeof(word_32_code);
- break;
- default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ switch (bank->bus_width) {
+ case 1:
+ target_code_src = word_8_code;
+ target_code_size = sizeof(word_8_code);
+ break;
+ case 2:
+ target_code_src = word_16_code;
+ target_code_size = sizeof(word_16_code);
+ break;
+ case 4:
+ target_code_src = word_32_code;
+ target_code_size = sizeof(word_32_code);
+ break;
+ default:
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ bank->bus_width);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* flash write code */
- if (!cfi_info->write_algorithm)
- {
- if (target_code_size > sizeof(target_code))
- {
+ if (!cfi_info->write_algorithm) {
+ if (target_code_size > sizeof(target_code)) {
LOG_WARNING("Internal error - target code buffer to small. "
- "Increase CFI_MAX_INTEL_CODESIZE and recompile.");
+ "Increase CFI_MAX_INTEL_CODESIZE and recompile.");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
cfi_fix_code_endian(target, target_code, target_code_src, target_code_size / 4);
/* Get memory for block write handler */
- retval = target_alloc_working_area(target, target_code_size, &cfi_info->write_algorithm);
- if (retval != ERROR_OK)
- {
+ retval = target_alloc_working_area(target,
+ target_code_size,
+ &cfi_info->write_algorithm);
+ if (retval != ERROR_OK) {
LOG_WARNING("No working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
+ ;
/* write algorithm code to working area */
retval = target_write_buffer(target, cfi_info->write_algorithm->address,
target_code_size, target_code);
- if (retval != ERROR_OK)
- {
+ if (retval != ERROR_OK) {
LOG_ERROR("Unable to write block write code to target");
goto cleanup;
}
@@ -1365,16 +1290,16 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
/* Get a workspace buffer for the data to flash starting with 32k size.
Half size until buffer would be smaller 256 Bytem then fail back */
/* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
- {
+ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
- if (buffer_size <= 256)
- {
- LOG_WARNING("no large enough working area available, can't do block memory writes");
+ if (buffer_size <= 256) {
+ LOG_WARNING(
+ "no large enough working area available, can't do block memory writes");
retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
goto cleanup;
}
- };
+ }
+ ;
/* setup algo registers */
init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
@@ -1391,19 +1316,16 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
error_pattern_val = cfi_command_val(bank, 0x7e);
LOG_DEBUG("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32,
- source->address, buffer_size);
+ source->address, buffer_size);
/* Programming main loop */
- while (count > 0)
- {
+ while (count > 0) {
uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count;
uint32_t wsm_error;
- if ((retval = target_write_buffer(target, source->address,
- thisrun_count, buffer)) != ERROR_OK)
- {
+ retval = target_write_buffer(target, source->address, thisrun_count, buffer);
+ if (retval != ERROR_OK)
goto cleanup;
- }
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
@@ -1413,20 +1335,22 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
- LOG_DEBUG("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address);
+ LOG_DEBUG("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32,
+ thisrun_count, address);
/* Execute algorithm, assume breakpoint for last instruction */
retval = target_run_algorithm(target, 0, NULL, 7, reg_params,
- cfi_info->write_algorithm->address,
- cfi_info->write_algorithm->address + target_code_size - sizeof(uint32_t),
- 10000, /* 10s should be enough for max. 32k of data */
- &armv4_5_info);
+ cfi_info->write_algorithm->address,
+ cfi_info->write_algorithm->address + target_code_size -
+ sizeof(uint32_t),
+ 10000, /* 10s should be enough for max. 32k of data */
+ &armv4_5_info);
/* On failure try a fall back to direct word writes */
- if (retval != ERROR_OK)
- {
+ if (retval != ERROR_OK) {
cfi_intel_clear_status_register(bank);
- LOG_ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
+ LOG_ERROR(
+ "Execution of flash algorythm failed. Can't fall back. Please report.");
retval = ERROR_FLASH_OPERATION_FAILED;
/* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */
/* FIXME To allow fall back or recovery, we must save the actual status
@@ -1436,8 +1360,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer,
/* Check return value from algo code */
wsm_error = buf_get_u32(reg_params[4].value, 0, 32) & error_pattern_val;
- if (wsm_error)
- {
+ if (wsm_error) {
/* read status register (outputs debug inforation) */
uint8_t status;
cfi_intel_wait_status_busy(bank, 100, &status);
@@ -1458,8 +1381,7 @@ cleanup:
if (source)
target_free_working_area(target, source);
- if (cfi_info->write_algorithm)
- {
+ if (cfi_info->write_algorithm) {
target_free_working_area(target, cfi_info->write_algorithm);
cfi_info->write_algorithm = NULL;
}
@@ -1476,7 +1398,7 @@ cleanup:
}
static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffer,
- uint32_t address, uint32_t count)
+ uint32_t address, uint32_t count)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
@@ -1488,72 +1410,86 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe
uint32_t status;
int retval = ERROR_OK;
- /* input parameters - */
- /* 4 A0 = source address */
- /* 5 A1 = destination address */
- /* 6 A2 = number of writes */
- /* 7 A3 = flash write command */
- /* 8 T0 = constant to mask DQ7 bits (also used for Dq5 with shift) */
- /* output parameters - */
- /* 9 T1 = 0x80 ok 0x00 bad */
- /* temp registers - */
- /* 10 T2 = value read from flash to test status */
- /* 11 T3 = holding register */
- /* unlock registers - */
- /* 12 T4 = unlock1_addr */
- /* 13 T5 = unlock1_cmd */
- /* 14 T6 = unlock2_addr */
- /* 15 T7 = unlock2_cmd */
+ /* input parameters -
+ * 4 A0 = source address
+ * 5 A1 = destination address
+ * 6 A2 = number of writes
+ * 7 A3 = flash write command
+ * 8 T0 = constant to mask DQ7 bits (also used for Dq5 with shift)
+ * output parameters -
+ * 9 T1 = 0x80 ok 0x00 bad
+ * temp registers -
+ * 10 T2 = value read from flash to test status
+ * 11 T3 = holding register
+ * unlock registers -
+ * 12 T4 = unlock1_addr
+ * 13 T5 = unlock1_cmd
+ * 14 T6 = unlock2_addr
+ * 15 T7 = unlock2_cmd */
static const uint32_t mips_word_16_code[] = {
- /* start: */
- MIPS32_LHU(9,0,4), /* lhu $t1, ($a0) ; out = &saddr */
- MIPS32_ADDI(4,4,2), /* addi $a0, $a0, 2 ; saddr += 2 */
- MIPS32_SH(13,0,12), /* sh $t5, ($t4) ; *fl_unl_addr1 = fl_unl_cmd1 */
- MIPS32_SH(15,0,14), /* sh $t7, ($t6) ; *fl_unl_addr2 = fl_unl_cmd2 */
- MIPS32_SH(7,0,12), /* sh $a3, ($t4) ; *fl_unl_addr1 = fl_write_cmd */
- MIPS32_SH(9,0,5), /* sh $t1, ($a1) ; *daddr = out */
+ /* start: */
+ MIPS32_LHU(9, 0, 4), /* lhu $t1, ($a0) ; out = &saddr */
+ MIPS32_ADDI(4, 4, 2), /* addi $a0, $a0, 2 ; saddr += 2 */
+ MIPS32_SH(13, 0, 12), /* sh $t5, ($t4) ; *fl_unl_addr1 =
+ *fl_unl_cmd1 */
+ MIPS32_SH(15, 0, 14), /* sh $t7, ($t6) ; *fl_unl_addr2 =
+ *fl_unl_cmd2 */
+ MIPS32_SH(7, 0, 12), /* sh $a3, ($t4) ; *fl_unl_addr1 =
+ *fl_write_cmd */
+ MIPS32_SH(9, 0, 5), /* sh $t1, ($a1) ; *daddr = out */
MIPS32_NOP, /* nop */
- /* busy: */
- MIPS32_LHU(10,0,5), /* lhu $t2, ($a1) ; temp1 = *daddr */
- MIPS32_XOR(11,9,10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
- MIPS32_AND(11,8,11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
- MIPS32_BNE(11,8, 13), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
+ /* busy: */
+ MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
+ MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^
+ *temp1; */
+ MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 &
+ *DQ7mask */
+ MIPS32_BNE(11, 8, 13), /* bne $t3, $t0, cont ; if (temp2 !=
+ *DQ7mask) goto cont */
MIPS32_NOP, /* nop */
- MIPS32_SRL(10,8,2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >> 2 */
- MIPS32_AND(11,10,11), /* and $t3, $t2, $t3 ; temp2 = temp2 & temp1 */
- MIPS32_BNE(11,10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 != temp1) goto busy */
+ MIPS32_SRL(10, 8, 2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >>
+ *2 */
+ MIPS32_AND(11, 10, 11), /* and $t3, $t2, $t3 ; temp2 = temp2 &
+ *temp1 */
+ MIPS32_BNE(11, 10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 !=
+ *temp1) goto busy */
MIPS32_NOP, /* nop */
- MIPS32_LHU(10,0,5), /* lhu $t2, ($a1) ; temp1 = *daddr */
- MIPS32_XOR(11,9,10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
- MIPS32_AND(11,8,11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
- MIPS32_BNE(11,8, 4), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
+ MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
+ MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^
+ *temp1; */
+ MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 &
+ *DQ7mask */
+ MIPS32_BNE(11, 8, 4), /* bne $t3, $t0, cont ; if (temp2 !=
+ *DQ7mask) goto cont */
MIPS32_NOP, /* nop */
- MIPS32_XOR(9,9,9), /* xor $t1, $t1, $t1 ; out = 0 */
- MIPS32_BEQ(9,0, 11), /* beq $t1, $zero, done ; if (out == 0) goto done */
+ MIPS32_XOR(9, 9, 9), /* xor $t1, $t1, $t1 ; out = 0 */
+ MIPS32_BEQ(9, 0, 11), /* beq $t1, $zero, done ; if (out == 0) goto
+ *done */
MIPS32_NOP, /* nop */
- /* cont: */
- MIPS32_ADDI(6,6,NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */
- MIPS32_BNE(6,0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0) goto cont2 */
+ /* cont: */
+ MIPS32_ADDI(6, 6, NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */
+ MIPS32_BNE(6, 0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0)
+ *goto cont2 */
MIPS32_NOP, /* nop */
-
- MIPS32_LUI(9,0), /* lui $t1, 0 */
- MIPS32_ORI(9,9,0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */
+
+ MIPS32_LUI(9, 0), /* lui $t1, 0 */
+ MIPS32_ORI(9, 9, 0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */
MIPS32_B(4), /* b done ; goto done */
MIPS32_NOP, /* nop */
- /* cont2: */
- MIPS32_ADDI(5,5,2), /* addi $a0, $a0, 2 ; daddr += 2 */
+ /* cont2: */
+ MIPS32_ADDI(5, 5, 2), /* addi $a0, $a0, 2 ; daddr += 2 */
MIPS32_B(NEG16(33)), /* b start ; goto start */
MIPS32_NOP, /* nop */
- /* done: */
- /*MIPS32_B(NEG16(1)), */ /* b done ; goto done */
+ /* done:
+ *MIPS32_B(NEG16(1)), */ /* b done ; goto done */
MIPS32_SDBBP, /* sdbbp ; break(); */
- /*MIPS32_B(NEG16(33)), */ /* b start ; goto start */
- /* MIPS32_NOP, */
+ /*MIPS32_B(NEG16(33)), */ /* b start ; goto start
+ * MIPS32_NOP, */
};
mips32_info.common_magic = MIPS32_COMMON_MAGIC;
@@ -1562,37 +1498,32 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe
int target_code_size = 0;
const uint32_t *target_code_src = NULL;
- switch (bank->bus_width)
- {
- case 2 :
- /* Check for DQ5 support */
- if( cfi_info->status_poll_mask & (1 << 5) )
- {
- target_code_src = mips_word_16_code;
- target_code_size = sizeof(mips_word_16_code);
- }
- else
- {
- LOG_ERROR("Need DQ5 support");
+ switch (bank->bus_width) {
+ case 2:
+ /* Check for DQ5 support */
+ if (cfi_info->status_poll_mask & (1 << 5)) {
+ target_code_src = mips_word_16_code;
+ target_code_size = sizeof(mips_word_16_code);
+ } else {
+ LOG_ERROR("Need DQ5 support");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ /* target_code_src = mips_word_16_code_dq7only; */
+ /* target_code_size = sizeof(mips_word_16_code_dq7only); */
+ }
+ break;
+ default:
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ bank->bus_width);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- //target_code_src = mips_word_16_code_dq7only;
- //target_code_size = sizeof(mips_word_16_code_dq7only);
- }
- break;
- default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* flash write code */
- if (!cfi_info->write_algorithm)
- {
+ if (!cfi_info->write_algorithm) {
uint8_t *target_code;
/* convert bus-width dependent algorithm code to correct endiannes */
target_code = malloc(target_code_size);
- if (target_code == NULL)
- {
+ if (target_code == NULL) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
@@ -1601,16 +1532,15 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe
/* allocate working area */
retval = target_alloc_working_area(target, target_code_size,
&cfi_info->write_algorithm);
- if (retval != ERROR_OK)
- {
+ if (retval != ERROR_OK) {
free(target_code);
return retval;
}
/* write algorithm code to working area */
- if ((retval = target_write_buffer(target, cfi_info->write_algorithm->address,
- target_code_size, target_code)) != ERROR_OK)
- {
+ retval = target_write_buffer(target, cfi_info->write_algorithm->address,
+ target_code_size, target_code);
+ if (retval != ERROR_OK) {
free(target_code);
return retval;
}
@@ -1619,20 +1549,20 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe
}
/* the following code still assumes target code is fixed 24*4 bytes */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
- {
+ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
- if (buffer_size <= 256)
- {
+ if (buffer_size <= 256) {
/* if we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
if (cfi_info->write_algorithm)
target_free_working_area(target, cfi_info->write_algorithm);
- LOG_WARNING("not enough working area available, can't do block memory writes");
+ LOG_WARNING(
+ "not enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
+ ;
init_reg_param(&reg_params[0], "a0", 32, PARAM_OUT);
init_reg_param(&reg_params[1], "a1", 32, PARAM_OUT);
@@ -1645,15 +1575,12 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe
init_reg_param(&reg_params[8], "t6", 32, PARAM_OUT);
init_reg_param(&reg_params[9], "t7", 32, PARAM_OUT);
- while (count > 0)
- {
+ while (count > 0) {
uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count;
retval = target_write_buffer(target, source->address, thisrun_count, buffer);
if (retval != ERROR_OK)
- {
break;
- }
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
@@ -1670,14 +1597,11 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe
cfi_info->write_algorithm->address + ((target_code_size) - 4),
10000, &mips32_info);
if (retval != ERROR_OK)
- {
break;
- }
status = buf_get_u32(reg_params[5].value, 0, 32);
- if (status != 0x80)
- {
- LOG_ERROR("flash write block failed status: 0x%" PRIx32 , status);
+ if (status != 0x80) {
+ LOG_ERROR("flash write block failed status: 0x%" PRIx32, status);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
@@ -1704,7 +1628,7 @@ static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffe
}
static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
- uint32_t address, uint32_t count)
+ uint32_t address, uint32_t count)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
@@ -1716,34 +1640,34 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
uint32_t status;
int retval = ERROR_OK;
- /* input parameters - */
- /* R0 = source address */
- /* R1 = destination address */
- /* R2 = number of writes */
- /* R3 = flash write command */
- /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
- /* output parameters - */
- /* R5 = 0x80 ok 0x00 bad */
- /* temp registers - */
- /* R6 = value read from flash to test status */
- /* R7 = holding register */
- /* unlock registers - */
- /* R8 = unlock1_addr */
- /* R9 = unlock1_cmd */
- /* R10 = unlock2_addr */
- /* R11 = unlock2_cmd */
+ /* input parameters -
+ * R0 = source address
+ * R1 = destination address
+ * R2 = number of writes
+ * R3 = flash write command
+ * R4 = constant to mask DQ7 bits (also used for Dq5 with shift)
+ * output parameters -
+ * R5 = 0x80 ok 0x00 bad
+ * temp registers -
+ * R6 = value read from flash to test status
+ * R7 = holding register
+ * unlock registers -
+ * R8 = unlock1_addr
+ * R9 = unlock1_cmd
+ * R10 = unlock2_addr
+ * R11 = unlock2_cmd */
/* see contib/loaders/flash/armv4_5_cfi_span_32.s for src */
static const uint32_t armv4_5_word_32_code[] = {
- /* 00008100 <sp_32_code>: */
+ /* 00008100 <sp_32_code>: */
0xe4905004, /* ldr r5, [r0], #4 */
0xe5889000, /* str r9, [r8] */
0xe58ab000, /* str r11, [r10] */
0xe5883000, /* str r3, [r8] */
0xe5815000, /* str r5, [r1] */
0xe1a00000, /* nop */
- /* */
- /* 00008110 <sp_32_busy>: */
+ /*
+ * 00008110 <sp_32_busy>: */
0xe5916000, /* ldr r6, [r1] */
0xe0257006, /* eor r7, r5, r6 */
0xe0147007, /* ands r7, r4, r7 */
@@ -1756,29 +1680,29 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
0x1a000004, /* bne 8154 <sp_32_done> */
- /* */
- /* 00008140 <sp_32_cont>: */
+ /*
+ * 00008140 <sp_32_cont>: */
0xe2522001, /* subs r2, r2, #1 ; 0x1 */
0x03a05080, /* moveq r5, #128 ; 0x80 */
0x0a000001, /* beq 8154 <sp_32_done> */
0xe2811004, /* add r1, r1, #4 ; 0x4 */
0xeaffffe8, /* b 8100 <sp_32_code> */
- /* */
- /* 00008154 <sp_32_done>: */
+ /*
+ * 00008154 <sp_32_done>: */
0xeafffffe /* b 8154 <sp_32_done> */
};
/* see contib/loaders/flash/armv4_5_cfi_span_16.s for src */
static const uint32_t armv4_5_word_16_code[] = {
- /* 00008158 <sp_16_code>: */
+ /* 00008158 <sp_16_code>: */
0xe0d050b2, /* ldrh r5, [r0], #2 */
0xe1c890b0, /* strh r9, [r8] */
0xe1cab0b0, /* strh r11, [r10] */
0xe1c830b0, /* strh r3, [r8] */
0xe1c150b0, /* strh r5, [r1] */
0xe1a00000, /* nop (mov r0,r0) */
- /* */
- /* 00008168 <sp_16_busy>: */
+ /*
+ * 00008168 <sp_16_busy>: */
0xe1d160b0, /* ldrh r6, [r1] */
0xe0257006, /* eor r7, r5, r6 */
0xe0147007, /* ands r7, r4, r7 */
@@ -1791,15 +1715,15 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
0x0a000001, /* beq 8198 <sp_16_cont> */
0xe3a05000, /* mov r5, #0 ; 0x0 */
0x1a000004, /* bne 81ac <sp_16_done> */
- /* */
- /* 00008198 <sp_16_cont>: */
- 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
- 0x03a05080, /* moveq r5, #128 ; 0x80 */
- 0x0a000001, /* beq 81ac <sp_16_done> */
- 0xe2811002, /* add r1, r1, #2 ; 0x2 */
- 0xeaffffe8, /* b 8158 <sp_16_code> */
- /* */
- /* 000081ac <sp_16_done>: */
+ /*
+ * 00008198 <sp_16_cont>: */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 81ac <sp_16_done> */
+ 0xe2811002, /* add r1, r1, #2 ; 0x2 */
+ 0xeaffffe8, /* b 8158 <sp_16_code> */
+ /*
+ * 000081ac <sp_16_done>: */
0xeafffffe /* b 81ac <sp_16_done> */
};
@@ -1827,41 +1751,41 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
/* see contib/loaders/flash/armv4_5_cfi_span_16_dq7.s for src */
static const uint32_t armv4_5_word_16_code_dq7only[] = {
- /* <sp_16_code>: */
+ /* <sp_16_code>: */
0xe0d050b2, /* ldrh r5, [r0], #2 */
0xe1c890b0, /* strh r9, [r8] */
0xe1cab0b0, /* strh r11, [r10] */
0xe1c830b0, /* strh r3, [r8] */
0xe1c150b0, /* strh r5, [r1] */
0xe1a00000, /* nop (mov r0,r0) */
- /* */
- /* <sp_16_busy>: */
+ /*
+ * <sp_16_busy>: */
0xe1d160b0, /* ldrh r6, [r1] */
0xe0257006, /* eor r7, r5, r6 */
0xe2177080, /* ands r7, #0x80 */
0x1afffffb, /* bne 8168 <sp_16_busy> */
- /* */
+ /* */
0xe2522001, /* subs r2, r2, #1 ; 0x1 */
0x03a05080, /* moveq r5, #128 ; 0x80 */
0x0a000001, /* beq 81ac <sp_16_done> */
0xe2811002, /* add r1, r1, #2 ; 0x2 */
0xeafffff0, /* b 8158 <sp_16_code> */
- /* */
- /* 000081ac <sp_16_done>: */
+ /*
+ * 000081ac <sp_16_done>: */
0xeafffffe /* b 81ac <sp_16_done> */
};
/* see contib/loaders/flash/armv4_5_cfi_span_8.s for src */
static const uint32_t armv4_5_word_8_code[] = {
- /* 000081b0 <sp_16_code_end>: */
+ /* 000081b0 <sp_16_code_end>: */
0xe4d05001, /* ldrb r5, [r0], #1 */
0xe5c89000, /* strb r9, [r8] */
0xe5cab000, /* strb r11, [r10] */
0xe5c83000, /* strb r3, [r8] */
0xe5c15000, /* strb r5, [r1] */
0xe1a00000, /* nop (mov r0,r0) */
- /* */
- /* 000081c0 <sp_8_busy>: */
+ /*
+ * 000081c0 <sp_8_busy>: */
0xe5d16000, /* ldrb r6, [r1] */
0xe0257006, /* eor r7, r5, r6 */
0xe0147007, /* ands r7, r4, r7 */
@@ -1874,30 +1798,26 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
0x0a000001, /* beq 81f0 <sp_8_cont> */
0xe3a05000, /* mov r5, #0 ; 0x0 */
0x1a000004, /* bne 8204 <sp_8_done> */
- /* */
- /* 000081f0 <sp_8_cont>: */
+ /*
+ * 000081f0 <sp_8_cont>: */
0xe2522001, /* subs r2, r2, #1 ; 0x1 */
0x03a05080, /* moveq r5, #128 ; 0x80 */
0x0a000001, /* beq 8204 <sp_8_done> */
0xe2811001, /* add r1, r1, #1 ; 0x1 */
0xeaffffe8, /* b 81b0 <sp_16_code_end> */
- /* */
- /* 00008204 <sp_8_done>: */
+ /*
+ * 00008204 <sp_8_done>: */
0xeafffffe /* b 8204 <sp_8_done> */
};
- if (strncmp(target_type_name(target),"mips_m4k",8) == 0)
- {
- return cfi_spansion_write_block_mips(bank,buffer,address,count);
- }
+ if (strncmp(target_type_name(target), "mips_m4k", 8) == 0)
+ return cfi_spansion_write_block_mips(bank, buffer, address, count);
- if (is_armv7m(target_to_armv7m(target))) /* Cortex-M3 target */
- {
+ if (is_armv7m(target_to_armv7m(target))) { /* Cortex-M3 target */
armv4_5_info.common_magic = ARMV7M_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV7M_MODE_HANDLER;
armv4_5_info.core_state = ARM_STATE_ARM;
- } else if (is_arm7_9(target_to_arm7_9(target)))
- {
+ } else if (is_arm7_9(target_to_arm7_9(target))) {
/* All other ARM CPUs have 32 bit instructions */
armv4_5_info.common_magic = ARM_COMMON_MAGIC;
armv4_5_info.core_mode = ARM_MODE_SVC;
@@ -1910,64 +1830,59 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
int target_code_size = 0;
const uint32_t *target_code_src = NULL;
- switch (bank->bus_width)
- {
- case 1 :
- if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) {
- LOG_ERROR("Unknown ARM architecture");
- return ERROR_FAIL;
- }
- target_code_src = armv4_5_word_8_code;
- target_code_size = sizeof(armv4_5_word_8_code);
- break;
- case 2 :
- /* Check for DQ5 support */
- if( cfi_info->status_poll_mask & (1 << 5) )
- {
- if(armv4_5_info.common_magic == ARM_COMMON_MAGIC) /* armv4_5 target */
- {
- target_code_src = armv4_5_word_16_code;
- target_code_size = sizeof(armv4_5_word_16_code);
+ switch (bank->bus_width) {
+ case 1:
+ if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) {
+ LOG_ERROR("Unknown ARM architecture");
+ return ERROR_FAIL;
}
- else if (armv4_5_info.common_magic == ARMV7M_COMMON_MAGIC) /* cortex-m3 target */
- {
- target_code_src = armv7m_word_16_code;
- target_code_size = sizeof(armv7m_word_16_code);
+ target_code_src = armv4_5_word_8_code;
+ target_code_size = sizeof(armv4_5_word_8_code);
+ break;
+ case 2:
+ /* Check for DQ5 support */
+ if (cfi_info->status_poll_mask & (1 << 5)) {
+ if (armv4_5_info.common_magic == ARM_COMMON_MAGIC) {/* armv4_5 target */
+ target_code_src = armv4_5_word_16_code;
+ target_code_size = sizeof(armv4_5_word_16_code);
+ } else if (armv4_5_info.common_magic == ARMV7M_COMMON_MAGIC) { /*
+ *cortex-m3
+ *target
+ **/
+ target_code_src = armv7m_word_16_code;
+ target_code_size = sizeof(armv7m_word_16_code);
+ }
+ } else {
+ /* No DQ5 support. Use DQ7 DATA# polling only. */
+ if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) {
+ LOG_ERROR("Unknown ARM architecture");
+ return ERROR_FAIL;
+ }
+ target_code_src = armv4_5_word_16_code_dq7only;
+ target_code_size = sizeof(armv4_5_word_16_code_dq7only);
}
- }
- else
- {
- /* No DQ5 support. Use DQ7 DATA# polling only. */
+ break;
+ case 4:
if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) {
LOG_ERROR("Unknown ARM architecture");
return ERROR_FAIL;
}
- target_code_src = armv4_5_word_16_code_dq7only;
- target_code_size = sizeof(armv4_5_word_16_code_dq7only);
- }
- break;
- case 4 :
- if (armv4_5_info.common_magic != ARM_COMMON_MAGIC) {
- LOG_ERROR("Unknown ARM architecture");
- return ERROR_FAIL;
- }
- target_code_src = armv4_5_word_32_code;
- target_code_size = sizeof(armv4_5_word_32_code);
- break;
- default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ target_code_src = armv4_5_word_32_code;
+ target_code_size = sizeof(armv4_5_word_32_code);
+ break;
+ default:
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ bank->bus_width);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* flash write code */
- if (!cfi_info->write_algorithm)
- {
+ if (!cfi_info->write_algorithm) {
uint8_t *target_code;
/* convert bus-width dependent algorithm code to correct endiannes */
target_code = malloc(target_code_size);
- if (target_code == NULL)
- {
+ if (target_code == NULL) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
@@ -1976,16 +1891,15 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
/* allocate working area */
retval = target_alloc_working_area(target, target_code_size,
&cfi_info->write_algorithm);
- if (retval != ERROR_OK)
- {
+ if (retval != ERROR_OK) {
free(target_code);
return retval;
}
/* write algorithm code to working area */
- if ((retval = target_write_buffer(target, cfi_info->write_algorithm->address,
- target_code_size, target_code)) != ERROR_OK)
- {
+ retval = target_write_buffer(target, cfi_info->write_algorithm->address,
+ target_code_size, target_code);
+ if (retval != ERROR_OK) {
free(target_code);
return retval;
}
@@ -1994,20 +1908,20 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
}
/* the following code still assumes target code is fixed 24*4 bytes */
- while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK)
- {
+ while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
buffer_size /= 2;
- if (buffer_size <= 256)
- {
+ if (buffer_size <= 256) {
/* if we already allocated the writing code, but failed to get a
* buffer, free the algorithm */
if (cfi_info->write_algorithm)
target_free_working_area(target, cfi_info->write_algorithm);
- LOG_WARNING("not enough working area available, can't do block memory writes");
+ LOG_WARNING(
+ "not enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
+ ;
init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
@@ -2020,15 +1934,12 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
init_reg_param(&reg_params[8], "r10", 32, PARAM_OUT);
init_reg_param(&reg_params[9], "r11", 32, PARAM_OUT);
- while (count > 0)
- {
+ while (count > 0) {
uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count;
retval = target_write_buffer(target, source->address, thisrun_count, buffer);
if (retval != ERROR_OK)
- {
break;
- }
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
@@ -2045,14 +1956,11 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer,
cfi_info->write_algorithm->address + ((target_code_size) - 4),
10000, &armv4_5_info);
if (retval != ERROR_OK)
- {
break;
- }
status = buf_get_u32(reg_params[5].value, 0, 32);
- if (status != 0x80)
- {
- LOG_ERROR("flash write block failed status: 0x%" PRIx32 , status);
+ if (status != 0x80) {
+ LOG_ERROR("flash write block failed status: 0x%" PRIx32, status);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
@@ -2085,27 +1993,23 @@ static int cfi_intel_write_word(struct flash_bank *bank, uint8_t *word, uint32_t
struct target *target = bank->target;
cfi_intel_clear_status_register(bank);
- if ((retval = cfi_send_command(bank, 0x40, address)) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x40, address);
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = target_write_memory(target, address, bank->bus_width, 1, word)) != ERROR_OK)
- {
+ retval = target_write_memory(target, address, bank->bus_width, 1, word);
+ if (retval != ERROR_OK)
return retval;
- }
uint8_t status;
retval = cfi_intel_wait_status_busy(bank, cfi_info->word_write_timeout, &status);
- if (retval != 0x80)
- {
- if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ if (retval != 0x80) {
+ retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address 0x%" PRIx32,
- bank->base, address);
+ bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -2113,33 +2017,32 @@ static int cfi_intel_write_word(struct flash_bank *bank, uint8_t *word, uint32_t
}
static int cfi_intel_write_words(struct flash_bank *bank, uint8_t *word,
- uint32_t wordcount, uint32_t address)
+ uint32_t wordcount, uint32_t address)
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct target *target = bank->target;
- /* Calculate buffer size and boundary mask */
- /* buffersize is (buffer size per chip) * (number of chips) */
- /* bufferwsize is buffersize in words */
- uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
+ /* Calculate buffer size and boundary mask
+ * buffersize is (buffer size per chip) * (number of chips)
+ * bufferwsize is buffersize in words */
+ uint32_t buffersize =
+ (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
uint32_t buffermask = buffersize-1;
uint32_t bufferwsize = buffersize / bank->bus_width;
/* Check for valid range */
- if (address & buffermask)
- {
+ if (address & buffermask) {
LOG_ERROR("Write address at base 0x%" PRIx32 ", address 0x%" PRIx32
- " not aligned to 2^%d boundary",
- bank->base, address, cfi_info->max_buf_write_size);
+ " not aligned to 2^%d boundary",
+ bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Check for valid size */
- if (wordcount > bufferwsize)
- {
+ if (wordcount > bufferwsize) {
LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32,
- wordcount, buffersize);
+ wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -2147,58 +2050,50 @@ static int cfi_intel_write_words(struct flash_bank *bank, uint8_t *word,
cfi_intel_clear_status_register(bank);
/* Initiate buffer operation _*/
- if ((retval = cfi_send_command(bank, 0xe8, address)) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xe8, address);
+ if (retval != ERROR_OK)
return retval;
- }
uint8_t status;
retval = cfi_intel_wait_status_busy(bank, cfi_info->buf_write_timeout, &status);
if (retval != ERROR_OK)
return retval;
- if (status != 0x80)
- {
- if ((retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ if (status != 0x80) {
+ retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
- LOG_ERROR("couldn't start buffer write operation at base 0x%" PRIx32 ", address 0x%" PRIx32,
- bank->base, address);
+ LOG_ERROR(
+ "couldn't start buffer write operation at base 0x%" PRIx32 ", address 0x%" PRIx32,
+ bank->base,
+ address);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Write buffer wordcount-1 and data words */
- if ((retval = cfi_send_command(bank, bufferwsize-1, address)) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, bufferwsize-1, address);
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = target_write_memory(target,
- address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
- {
+ retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word);
+ if (retval != ERROR_OK)
return retval;
- }
/* Commit write operation */
- if ((retval = cfi_send_command(bank, 0xd0, address)) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xd0, address);
+ if (retval != ERROR_OK)
return retval;
- }
retval = cfi_intel_wait_status_busy(bank, cfi_info->buf_write_timeout, &status);
if (retval != ERROR_OK)
return retval;
- if (status != 0x80)
- {
- if ((retval = cfi_send_command(bank, 0xff,
- flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ if (status != 0x80) {
+ retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("Buffer write at base 0x%" PRIx32
- ", address 0x%" PRIx32 " failed.", bank->base, address);
+ ", address 0x%" PRIx32 " failed.", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -2212,39 +2107,29 @@ static int cfi_spansion_write_word(struct flash_bank *bank, uint8_t *word, uint3
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
struct target *target = bank->target;
- if ((retval = cfi_send_command(bank, 0xaa,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x55,
- flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0xa0,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xa0, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = target_write_memory(target,
- address, bank->bus_width, 1, word)) != ERROR_OK)
- {
+ retval = target_write_memory(target, address, bank->bus_width, 1, word);
+ if (retval != ERROR_OK)
return retval;
- }
- if (cfi_spansion_wait_status_busy(bank, cfi_info->word_write_timeout) != ERROR_OK)
- {
- if ((retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ if (cfi_spansion_wait_status_busy(bank, cfi_info->word_write_timeout) != ERROR_OK) {
+ retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("couldn't write word at base 0x%" PRIx32
- ", address 0x%" PRIx32 , bank->base, address);
+ ", address 0x%" PRIx32, bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -2252,84 +2137,72 @@ static int cfi_spansion_write_word(struct flash_bank *bank, uint8_t *word, uint3
}
static int cfi_spansion_write_words(struct flash_bank *bank, uint8_t *word,
- uint32_t wordcount, uint32_t address)
+ uint32_t wordcount, uint32_t address)
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct target *target = bank->target;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
- /* Calculate buffer size and boundary mask */
- /* buffersize is (buffer size per chip) * (number of chips) */
- /* bufferwsize is buffersize in words */
- uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
+ /* Calculate buffer size and boundary mask
+ * buffersize is (buffer size per chip) * (number of chips)
+ * bufferwsize is buffersize in words */
+ uint32_t buffersize =
+ (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
uint32_t buffermask = buffersize-1;
uint32_t bufferwsize = buffersize / bank->bus_width;
/* Check for valid range */
- if (address & buffermask)
- {
+ if (address & buffermask) {
LOG_ERROR("Write address at base 0x%" PRIx32
- ", address 0x%" PRIx32 " not aligned to 2^%d boundary",
- bank->base, address, cfi_info->max_buf_write_size);
+ ", address 0x%" PRIx32 " not aligned to 2^%d boundary",
+ bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Check for valid size */
- if (wordcount > bufferwsize)
- {
+ if (wordcount > bufferwsize) {
LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %"
- PRId32, wordcount, buffersize);
+ PRId32, wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Unlock */
- if ((retval = cfi_send_command(bank, 0xaa,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x55,
- flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ if (retval != ERROR_OK)
return retval;
- }
/* Buffer load command */
- if ((retval = cfi_send_command(bank, 0x25, address)) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x25, address);
+ if (retval != ERROR_OK)
return retval;
- }
/* Write buffer wordcount-1 and data words */
- if ((retval = cfi_send_command(bank, bufferwsize-1, address)) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, bufferwsize-1, address);
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = target_write_memory(target,
- address, bank->bus_width, bufferwsize, word)) != ERROR_OK)
- {
+ retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word);
+ if (retval != ERROR_OK)
return retval;
- }
/* Commit write operation */
- if ((retval = cfi_send_command(bank, 0x29, address)) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x29, address);
+ if (retval != ERROR_OK)
return retval;
- }
- if (cfi_spansion_wait_status_busy(bank, cfi_info->buf_write_timeout) != ERROR_OK)
- {
- if ((retval = cfi_send_command(bank, 0xf0,
- flash_address(bank, 0, 0x0))) != ERROR_OK)
- {
+ if (cfi_spansion_wait_status_busy(bank, cfi_info->buf_write_timeout) != ERROR_OK) {
+ retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("couldn't write block at base 0x%" PRIx32
- ", address 0x%" PRIx32 ", size 0x%" PRIx32, bank->base, address, bufferwsize);
+ ", address 0x%" PRIx32 ", size 0x%" PRIx32, bank->base, address,
+ bufferwsize);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -2340,8 +2213,7 @@ static int cfi_write_word(struct flash_bank *bank, uint8_t *word, uint32_t addre
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- switch (cfi_info->pri_id)
- {
+ switch (cfi_info->pri_id) {
case 1:
case 3:
return cfi_intel_write_word(bank, word, address);
@@ -2358,19 +2230,17 @@ static int cfi_write_word(struct flash_bank *bank, uint8_t *word, uint32_t addre
}
static int cfi_write_words(struct flash_bank *bank, uint8_t *word,
- uint32_t wordcount, uint32_t address)
+ uint32_t wordcount, uint32_t address)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- if (cfi_info->buf_write_timeout_typ == 0)
- {
+ if (cfi_info->buf_write_timeout_typ == 0) {
/* buffer writes are not supported */
LOG_DEBUG("Buffer Writes Not Supported");
return ERROR_FLASH_OPER_UNSUPPORTED;
}
- switch (cfi_info->pri_id)
- {
+ switch (cfi_info->pri_id) {
case 1:
case 3:
return cfi_intel_write_words(bank, word, wordcount, address);
@@ -2400,8 +2270,7 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u
LOG_DEBUG("reading buffer of %i byte at 0x%8.8x",
(int)count, (unsigned)offset);
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
@@ -2414,13 +2283,13 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u
/* start at the first byte of the first word (bus_width size) */
read_p = address & ~(bank->bus_width - 1);
- if ((align = address - read_p) != 0)
- {
+ align = address - read_p;
+ if (align != 0) {
LOG_INFO("Fixup %d unaligned read head bytes", align);
/* read a complete word from flash */
- if ((retval = target_read_memory(target, read_p,
- bank->bus_width, 1, current_word)) != ERROR_OK)
+ retval = target_read_memory(target, read_p, bank->bus_width, 1, current_word);
+ if (retval != ERROR_OK)
return retval;
/* take only bytes we need */
@@ -2431,10 +2300,9 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u
}
align = count / bank->bus_width;
- if (align)
- {
- if ((retval = target_read_memory(target, read_p,
- bank->bus_width, align, buffer)) != ERROR_OK)
+ if (align) {
+ retval = target_read_memory(target, read_p, bank->bus_width, align, buffer);
+ if (retval != ERROR_OK)
return retval;
read_p += align * bank->bus_width;
@@ -2442,13 +2310,12 @@ static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, u
count -= align * bank->bus_width;
}
- if (count)
- {
+ if (count) {
LOG_INFO("Fixup %d unaligned read tail bytes", count);
/* read a complete word from flash */
- if ((retval = target_read_memory(target, read_p,
- bank->bus_width, 1, current_word)) != ERROR_OK)
+ retval = target_read_memory(target, read_p, bank->bus_width, 1, current_word);
+ if (retval != ERROR_OK)
return retval;
/* take only bytes we need */
@@ -2466,13 +2333,13 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset,
uint32_t address = bank->base + offset; /* address of first byte to be programmed */
uint32_t write_p;
int align; /* number of unaligned bytes */
- int blk_count; /* number of bus_width bytes for block copy */
- uint8_t current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being programmed */
+ int blk_count; /* number of bus_width bytes for block copy */
+ uint8_t current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being
+ *programmed */
int i;
int retval;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
@@ -2485,13 +2352,13 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset,
/* start at the first byte of the first word (bus_width size) */
write_p = address & ~(bank->bus_width - 1);
- if ((align = address - write_p) != 0)
- {
+ align = address - write_p;
+ if (align != 0) {
LOG_INFO("Fixup %d unaligned head bytes", align);
/* read a complete word from flash */
- if ((retval = target_read_memory(target, write_p,
- bank->bus_width, 1, current_word)) != ERROR_OK)
+ retval = target_read_memory(target, write_p, bank->bus_width, 1, current_word);
+ if (retval != ERROR_OK)
return retval;
/* replace only bytes that must be written */
@@ -2505,9 +2372,8 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset,
}
/* handle blocks of bus_size aligned bytes */
- blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */
- switch (cfi_info->pri_id)
- {
+ blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */
+ switch (cfi_info->pri_id) {
/* try block writes (fails without working area) */
case 1:
case 3:
@@ -2521,50 +2387,44 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset,
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
- if (retval == ERROR_OK)
- {
+ if (retval == ERROR_OK) {
/* Increment pointers and decrease count on succesful block write */
buffer += blk_count;
write_p += blk_count;
count -= blk_count;
- }
- else
- {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
- /* Calculate buffer size and boundary mask */
- /* buffersize is (buffer size per chip) * (number of chips) */
- /* bufferwsize is buffersize in words */
- uint32_t buffersize = (1UL << cfi_info->max_buf_write_size) * (bank->bus_width / bank->chip_width);
+ } else {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
+ /* Calculate buffer size and boundary mask
+ * buffersize is (buffer size per chip) * (number of chips)
+ * bufferwsize is buffersize in words */
+ uint32_t buffersize =
+ (1UL <<
+ cfi_info->max_buf_write_size) *
+ (bank->bus_width / bank->chip_width);
uint32_t buffermask = buffersize-1;
uint32_t bufferwsize = buffersize / bank->bus_width;
/* fall back to memory writes */
- while (count >= (uint32_t)bank->bus_width)
- {
+ while (count >= (uint32_t)bank->bus_width) {
int fallback;
- if ((write_p & 0xff) == 0)
- {
+ if ((write_p & 0xff) == 0) {
LOG_INFO("Programming at 0x%08" PRIx32 ", count 0x%08"
- PRIx32 " bytes remaining", write_p, count);
+ PRIx32 " bytes remaining", write_p, count);
}
fallback = 1;
- if ((bufferwsize > 0) && (count >= buffersize) && !(write_p & buffermask))
- {
+ if ((bufferwsize > 0) && (count >= buffersize) &&
+ !(write_p & buffermask)) {
retval = cfi_write_words(bank, buffer, bufferwsize, write_p);
- if (retval == ERROR_OK)
- {
+ if (retval == ERROR_OK) {
buffer += buffersize;
write_p += buffersize;
count -= buffersize;
fallback = 0;
- }
- else if (retval != ERROR_FLASH_OPER_UNSUPPORTED)
+ } else if (retval != ERROR_FLASH_OPER_UNSUPPORTED)
return retval;
}
/* try the slow way? */
- if (fallback)
- {
+ if (fallback) {
for (i = 0; i < bank->bus_width; i++)
current_word[i] = *buffer++;
@@ -2576,25 +2436,22 @@ static int cfi_write(struct flash_bank *bank, uint8_t *buffer, uint32_t offset,
count -= bank->bus_width;
}
}
- }
- else
+ } else
return retval;
}
/* return to read array mode, so we can read from flash again for padding */
- if ((retval = cfi_reset(bank)) != ERROR_OK)
- {
+ retval = cfi_reset(bank);
+ if (retval != ERROR_OK)
return retval;
- }
/* handle unaligned tail bytes */
- if (count > 0)
- {
+ if (count > 0) {
LOG_INFO("Fixup %" PRId32 " unaligned tail bytes", count);
/* read a complete word from flash */
- if ((retval = target_read_memory(target, write_p,
- bank->bus_width, 1, current_word)) != ERROR_OK)
+ retval = target_read_memory(target, write_p, bank->bus_width, 1, current_word);
+ if (retval != ERROR_OK)
return retval;
/* replace only bytes that must be written */
@@ -2626,12 +2483,10 @@ static void cfi_fixup_0002_erase_regions(struct flash_bank *bank, void *param)
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
(void) param;
- if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3))
- {
+ if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3)) {
LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device");
- for (i = 0; i < cfi_info->num_erase_regions / 2; i++)
- {
+ for (i = 0; i < cfi_info->num_erase_regions / 2; i++) {
int j = (cfi_info->num_erase_regions - 1) - i;
uint32_t swap;
@@ -2658,10 +2513,9 @@ static int cfi_query_string(struct flash_bank *bank, int address)
struct cfi_flash_bank *cfi_info = bank->driver_priv;
int retval;
- if ((retval = cfi_send_command(bank, 0x98, flash_address(bank, 0, address))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x98, flash_address(bank, 0, address));
+ if (retval != ERROR_OK)
return retval;
- }
retval = cfi_query_u8(bank, 0, 0x10, &cfi_info->qry[0]);
if (retval != ERROR_OK)
@@ -2674,14 +2528,12 @@ static int cfi_query_string(struct flash_bank *bank, int address)
return retval;
LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x",
- cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
+ cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
- if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
- {
- if ((retval = cfi_reset(bank)) != ERROR_OK)
- {
+ if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y')) {
+ retval = cfi_reset(bank);
+ if (retval != ERROR_OK)
return retval;
- }
LOG_ERROR("Could not probe bank: no QRY");
return ERROR_FLASH_BANK_INVALID;
}
@@ -2701,21 +2553,18 @@ static int cfi_probe(struct flash_bank *bank)
int retval;
uint8_t value_buf0[CFI_MAX_BUS_WIDTH], value_buf1[CFI_MAX_BUS_WIDTH];
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
cfi_info->probed = 0;
cfi_info->num_erase_regions = 0;
- if (bank->sectors)
- {
+ if (bank->sectors) {
free(bank->sectors);
bank->sectors = NULL;
}
- if(cfi_info->erase_region_info)
- {
+ if (cfi_info->erase_region_info) {
free(cfi_info->erase_region_info);
cfi_info->erase_region_info = NULL;
}
@@ -2723,36 +2572,30 @@ static int cfi_probe(struct flash_bank *bank)
/* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
* while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
*/
- if (cfi_info->jedec_probe)
- {
+ if (cfi_info->jedec_probe) {
unlock1 = 0x5555;
unlock2 = 0x2aaa;
}
/* switch to read identifier codes mode ("AUTOSELECT") */
- if ((retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, unlock2))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, unlock2));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = target_read_memory(target, flash_address(bank, 0, 0x00),
- bank->bus_width, 1, value_buf0)) != ERROR_OK)
- {
+ retval = target_read_memory(target, flash_address(bank, 0, 0x00),
+ bank->bus_width, 1, value_buf0);
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = target_read_memory(target, flash_address(bank, 0, 0x01),
- bank->bus_width, 1, value_buf1)) != ERROR_OK)
- {
+ retval = target_read_memory(target, flash_address(bank, 0, 0x01),
+ bank->bus_width, 1, value_buf1);
+ if (retval != ERROR_OK)
return retval;
- }
switch (bank->chip_width) {
case 1:
cfi_info->manufacturer = *value_buf0;
@@ -2767,17 +2610,17 @@ static int cfi_probe(struct flash_bank *bank)
cfi_info->device_id = target_buffer_get_u32(target, value_buf1);
break;
default:
- LOG_ERROR("Unsupported bank chipwidth %d, can't probe memory", bank->chip_width);
+ LOG_ERROR("Unsupported bank chipwidth %d, can't probe memory",
+ bank->chip_width);
return ERROR_FLASH_OPERATION_FAILED;
}
LOG_INFO("Flash Manufacturer/Device: 0x%04x 0x%04x",
- cfi_info->manufacturer, cfi_info->device_id);
+ cfi_info->manufacturer, cfi_info->device_id);
/* switch back to read array mode */
- if ((retval = cfi_reset(bank)) != ERROR_OK)
- {
+ retval = cfi_reset(bank);
+ if (retval != ERROR_OK)
return retval;
- }
/* check device/manufacturer ID for known non-CFI flashes. */
cfi_fixup_non_cfi(bank);
@@ -2785,8 +2628,7 @@ static int cfi_probe(struct flash_bank *bank)
/* query only if this is a CFI compatible flash,
* otherwise the relevant info has already been filled in
*/
- if (cfi_info->not_cfi == 0)
- {
+ if (cfi_info->not_cfi == 0) {
/* enter CFI query mode
* according to JEDEC Standard No. 68.01,
* a single bus sequence with address = 0x55, data = 0x98 should put
@@ -2796,8 +2638,7 @@ static int cfi_probe(struct flash_bank *bank)
*/
retval = cfi_query_string(bank, 0x55);
- if (retval != ERROR_OK)
- {
+ if (retval != ERROR_OK) {
/*
* Spansion S29WS-N CFI query fix is to try 0x555 if 0x55 fails. Should
* be harmless enough:
@@ -2824,9 +2665,9 @@ static int cfi_probe(struct flash_bank *bank)
return retval;
LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: "
- "0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1],
- cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr,
- cfi_info->alt_id, cfi_info->alt_addr);
+ "0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1],
+ cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr,
+ cfi_info->alt_id, cfi_info->alt_addr);
retval = cfi_query_u8(bank, 0, 0x1b, &cfi_info->vcc_min);
if (retval != ERROR_OK)
@@ -2883,32 +2724,32 @@ static int cfi_probe(struct flash_bank *bank)
return retval;
LOG_DEBUG("size: 0x%" PRIx32 ", interface desc: %i, max buffer write size: 0x%x",
- cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
+ cfi_info->dev_size, cfi_info->interface_desc,
+ (1 << cfi_info->max_buf_write_size));
- if (cfi_info->num_erase_regions)
- {
+ if (cfi_info->num_erase_regions) {
cfi_info->erase_region_info = malloc(sizeof(*cfi_info->erase_region_info)
* cfi_info->num_erase_regions);
- for (i = 0; i < cfi_info->num_erase_regions; i++)
- {
- retval = cfi_query_u32(bank, 0, 0x2d + (4 * i), &cfi_info->erase_region_info[i]);
+ for (i = 0; i < cfi_info->num_erase_regions; i++) {
+ retval = cfi_query_u32(bank,
+ 0,
+ 0x2d + (4 * i),
+ &cfi_info->erase_region_info[i]);
if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("erase region[%i]: %" PRIu32 " blocks of size 0x%" PRIx32 "", i,
- (cfi_info->erase_region_info[i] & 0xffff) + 1,
- (cfi_info->erase_region_info[i] >> 16) * 256);
+ LOG_DEBUG(
+ "erase region[%i]: %" PRIu32 " blocks of size 0x%" PRIx32 "",
+ i,
+ (cfi_info->erase_region_info[i] & 0xffff) + 1,
+ (cfi_info->erase_region_info[i] >> 16) * 256);
}
- }
- else
- {
+ } else
cfi_info->erase_region_info = NULL;
- }
/* We need to read the primary algorithm extended query table before calculating
* the sector layout to be able to apply fixups
*/
- switch (cfi_info->pri_id)
- {
+ switch (cfi_info->pri_id) {
/* Intel command set (standard and extended) */
case 0x0001:
case 0x0003:
@@ -2916,7 +2757,13 @@ static int cfi_probe(struct flash_bank *bank)
break;
/* AMD/Spansion, Atmel, ... command set */
case 0x0002:
- cfi_info->status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7; /* default for all CFI flashs */
+ cfi_info->status_poll_mask = CFI_STATUS_POLL_MASK_DQ5_DQ6_DQ7; /*
+ *default
+ *for
+ *all
+ *CFI
+ *flashs
+ **/
cfi_read_0002_pri_ext(bank);
break;
default:
@@ -2927,11 +2774,10 @@ static int cfi_probe(struct flash_bank *bank)
/* return to read array mode
* we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
*/
- if ((retval = cfi_reset(bank)) != ERROR_OK)
- {
+ retval = cfi_reset(bank);
+ if (retval != ERROR_OK)
return retval;
- }
- } /* end CFI case */
+ } /* end CFI case */
LOG_DEBUG("Vcc min: %x.%x, Vcc max: %x.%x, Vpp min: %u.%x, Vpp max: %u.%x",
(cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
@@ -2940,35 +2786,34 @@ static int cfi_probe(struct flash_bank *bank)
(cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
LOG_DEBUG("typ. word write timeout: %u us, typ. buf write timeout: %u us, "
- "typ. block erase timeout: %u ms, typ. chip erase timeout: %u ms",
- 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
- 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
+ "typ. block erase timeout: %u ms, typ. chip erase timeout: %u ms",
+ 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
+ 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
LOG_DEBUG("max. word write timeout: %u us, max. buf write timeout: %u us, "
- "max. block erase timeout: %u ms, max. chip erase timeout: %u ms",
- (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
- (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
- (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
- (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
+ "max. block erase timeout: %u ms, max. chip erase timeout: %u ms",
+ (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
+ (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
+ (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
+ (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
/* convert timeouts to real values in ms */
cfi_info->word_write_timeout = DIV_ROUND_UP((1L << cfi_info->word_write_timeout_typ) *
- (1L << cfi_info->word_write_timeout_max), 1000);
+ (1L << cfi_info->word_write_timeout_max), 1000);
cfi_info->buf_write_timeout = DIV_ROUND_UP((1L << cfi_info->buf_write_timeout_typ) *
- (1L << cfi_info->buf_write_timeout_max), 1000);
+ (1L << cfi_info->buf_write_timeout_max), 1000);
cfi_info->block_erase_timeout = (1L << cfi_info->block_erase_timeout_typ) *
- (1L << cfi_info->block_erase_timeout_max);
+ (1L << cfi_info->block_erase_timeout_max);
cfi_info->chip_erase_timeout = (1L << cfi_info->chip_erase_timeout_typ) *
- (1L << cfi_info->chip_erase_timeout_max);
+ (1L << cfi_info->chip_erase_timeout_max);
LOG_DEBUG("calculated word write timeout: %u ms, buf write timeout: %u ms, "
- "block erase timeout: %u ms, chip erase timeout: %u ms",
- cfi_info->word_write_timeout, cfi_info->buf_write_timeout,
- cfi_info->block_erase_timeout, cfi_info->chip_erase_timeout);
+ "block erase timeout: %u ms, chip erase timeout: %u ms",
+ cfi_info->word_write_timeout, cfi_info->buf_write_timeout,
+ cfi_info->block_erase_timeout, cfi_info->chip_erase_timeout);
/* apply fixups depending on the primary command set */
- switch (cfi_info->pri_id)
- {
+ switch (cfi_info->pri_id) {
/* Intel command set (standard and extended) */
case 0x0001:
case 0x0003:
@@ -2983,14 +2828,12 @@ static int cfi_probe(struct flash_bank *bank)
break;
}
- if ((cfi_info->dev_size * bank->bus_width / bank->chip_width) != bank->size)
- {
+ if ((cfi_info->dev_size * bank->bus_width / bank->chip_width) != bank->size) {
LOG_WARNING("configuration specifies 0x%" PRIx32 " size, but a 0x%" PRIx32
- " size flash was found", bank->size, cfi_info->dev_size);
+ " size flash was found", bank->size, cfi_info->dev_size);
}
- if (cfi_info->num_erase_regions == 0)
- {
+ if (cfi_info->num_erase_regions == 0) {
/* a device might have only one erase block, spanning the whole device */
bank->num_sectors = 1;
bank->sectors = malloc(sizeof(struct flash_sector));
@@ -2999,37 +2842,33 @@ static int cfi_probe(struct flash_bank *bank)
bank->sectors[sector].size = bank->size;
bank->sectors[sector].is_erased = -1;
bank->sectors[sector].is_protected = -1;
- }
- else
- {
+ } else {
uint32_t offset = 0;
for (i = 0; i < cfi_info->num_erase_regions; i++)
- {
num_sectors += (cfi_info->erase_region_info[i] & 0xffff) + 1;
- }
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
- for (i = 0; i < cfi_info->num_erase_regions; i++)
- {
+ for (i = 0; i < cfi_info->num_erase_regions; i++) {
uint32_t j;
- for (j = 0; j < (cfi_info->erase_region_info[i] & 0xffff) + 1; j++)
- {
+ for (j = 0; j < (cfi_info->erase_region_info[i] & 0xffff) + 1; j++) {
bank->sectors[sector].offset = offset;
- bank->sectors[sector].size = ((cfi_info->erase_region_info[i] >> 16) * 256)
- * bank->bus_width / bank->chip_width;
+ bank->sectors[sector].size =
+ ((cfi_info->erase_region_info[i] >> 16) * 256)
+ * bank->bus_width / bank->chip_width;
offset += bank->sectors[sector].size;
bank->sectors[sector].is_erased = -1;
bank->sectors[sector].is_protected = -1;
sector++;
}
}
- if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width))
- {
- LOG_WARNING("CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \
- (cfi_info->dev_size * bank->bus_width / bank->chip_width), offset);
+ if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width)) {
+ LOG_WARNING(
+ "CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \
+ (cfi_info->dev_size * bank->bus_width / bank->chip_width),
+ offset);
}
}
@@ -3057,13 +2896,11 @@ static int cfi_intel_protect_check(struct flash_bank *bank)
if (!(pri_ext->blk_status_reg_mask & 0x1))
return ERROR_FLASH_OPERATION_FAILED;
- if ((retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55));
+ if (retval != ERROR_OK)
return retval;
- }
- for (i = 0; i < bank->num_sectors; i++)
- {
+ for (i = 0; i < bank->num_sectors; i++) {
uint8_t block_status;
retval = cfi_get_u8(bank, i, 0x2, &block_status);
if (retval != ERROR_OK)
@@ -3085,26 +2922,19 @@ static int cfi_spansion_protect_check(struct flash_bank *bank)
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
int i;
- if ((retval = cfi_send_command(bank, 0xaa,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x55,
- flash_address(bank, 0, pri_ext->_unlock2))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ if (retval != ERROR_OK)
return retval;
- }
- if ((retval = cfi_send_command(bank, 0x90,
- flash_address(bank, 0, pri_ext->_unlock1))) != ERROR_OK)
- {
+ retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
return retval;
- }
- for (i = 0; i < bank->num_sectors; i++)
- {
+ for (i = 0; i < bank->num_sectors; i++) {
uint8_t block_status;
retval = cfi_get_u8(bank, i, 0x2, &block_status);
if (retval != ERROR_OK)
@@ -3123,8 +2953,7 @@ static int cfi_protect_check(struct flash_bank *bank)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- if (bank->target->state != TARGET_HALTED)
- {
+ if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
@@ -3132,8 +2961,7 @@ static int cfi_protect_check(struct flash_bank *bank)
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
- switch (cfi_info->pri_id)
- {
+ switch (cfi_info->pri_id) {
case 1:
case 3:
return cfi_intel_protect_check(bank);
@@ -3154,8 +2982,7 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size)
int printed;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- if (cfi_info->qry[0] == 0xff)
- {
+ if (cfi_info->qry[0] == 0xff) {
snprintf(buf, buf_size, "\ncfi flash bank not probed yet\n");
return ERROR_OK;
}
@@ -3168,7 +2995,7 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size)
buf_size -= printed;
printed = snprintf(buf, buf_size, "mfr: 0x%4.4x, id:0x%4.4x\n\n",
- cfi_info->manufacturer, cfi_info->device_id);
+ cfi_info->manufacturer, cfi_info->device_id);
buf += printed;
buf_size -= printed;
@@ -3199,13 +3026,21 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size)
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "max. word write timeout: %u us, "
+ printed = snprintf(buf,
+ buf_size,
+ "max. word write timeout: %u us, "
"max. buf write timeout: %u us, max. "
"block erase timeout: %u ms, max. chip erase timeout: %u ms\n",
- (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
- (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
- (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
- (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
+ (1 <<
+ cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
+ (1 <<
+ cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
+ (1 <<
+ cfi_info->block_erase_timeout_max) *
+ (1 << cfi_info->block_erase_timeout_typ),
+ (1 <<
+ cfi_info->chip_erase_timeout_max) *
+ (1 << cfi_info->chip_erase_timeout_typ));
buf += printed;
buf_size -= printed;
@@ -3217,18 +3052,17 @@ static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size)
buf += printed;
buf_size -= printed;
- switch (cfi_info->pri_id)
- {
- case 1:
- case 3:
- cfi_intel_info(bank, buf, buf_size);
- break;
- case 2:
- cfi_spansion_info(bank, buf, buf_size);
- break;
- default:
- LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
- break;
+ switch (cfi_info->pri_id) {
+ case 1:
+ case 3:
+ cfi_intel_info(bank, buf, buf_size);
+ break;
+ case 2:
+ cfi_spansion_info(bank, buf, buf_size);
+ break;
+ default:
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ break;
}
return ERROR_OK;
generated by cgit v1.1 at 2024-11-16 17:09:27 +0000