diff options
Diffstat (limited to 'doc/openocd.texi')
-rw-r--r-- | doc/openocd.texi | 18 |
1 files changed, 14 insertions, 4 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 1632e42..cef1cae 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5290,11 +5290,16 @@ flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME Checks status of device security lock. Used internally in examine-end event. @end deffn +@deffn Command {kinetis mdm halt} +Issues a halt via the MDM-AP. This command can be used to break a watchdog reset +loop when connecting to an unsecured target. +@end deffn + @deffn Command {kinetis mdm mass_erase} -Issues a complete Flash erase via the MDM-AP. -This can be used to erase a chip back to its factory state. -Command removes security lock from a device (use of SRST highly recommended). -It does not require the processor to be halted. +Issues a complete flash erase via the MDM-AP. This can be used to erase a chip +back to its factory state, removing security. It does not require the processor +to be halted, however the target will remain in a halted state after this +command completes. @end deffn @deffn Command {kinetis nvm_partition} @@ -5327,6 +5332,11 @@ kinetis nvm_partition eebkp 16 1024 1024 off @end example @end deffn +@deffn Command {kinetis mdm reset} +Issues a reset via the MDM-AP. This causes the MCU to output a low pulse on the +RESET pin, which can be used to reset other hardware on board. +@end deffn + @deffn Command {kinetis disable_wdog} For Kx devices only (KLx has different COP watchdog, it is not supported). Command disables watchdog timer. |