diff options
| -rw-r--r-- | tcl/board/8devices-lima.cfg | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/tcl/board/8devices-lima.cfg b/tcl/board/8devices-lima.cfg new file mode 100644 index 0000000..136f861 --- /dev/null +++ b/tcl/board/8devices-lima.cfg @@ -0,0 +1,30 @@ +# Product page: +# https://www.8devices.com/products/lima +# +# Location of JTAG pins: +# J2 GPIO0 JTAG TCK +# J2 GPIO1 JTAG TDI +# J2 GPIO2 JTAG TDO +# J2 GPIO3 JTAG TMS +# J2 RST directly connected to RESET_L of the SoC and can be used as +# JTAG SRST. Note: this pin will also reset the debug engine. +# J1 +3,3V Can be use as JTAG Vref +# J1 or J2 GND Can be used for JTAG GND +# +# This board is powered from mini USB connecter which is also used +# as USB to UART converted based on FTDI FT230XQ chip + +source [find target/qualcomm_qca4531.cfg] + +proc board_init { } { + qca4531_ddr2_550_550_init +} + +$_TARGETNAME configure -event reset-init { + board_init +} + +set ram_boot_address 0xa0000000 +$_TARGETNAME configure -work-area-phys 0xa1FFE000 -work-area-size 0x1000 + +flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0 |