diff options
94 files changed, 0 insertions, 116 deletions
diff --git a/tcl/bitsbytes.tcl b/tcl/bitsbytes.tcl index 2c4fd29..52ca83d 100644 --- a/tcl/bitsbytes.tcl +++ b/tcl/bitsbytes.tcl @@ -57,5 +57,3 @@ proc show_normalize_bitfield { VALUE MSB LSB } { echo [format "((0x%08x & 0x%08x) -> 0x%08x) >> %2d => (0x%x) %5d " $VALUE $m $mr $LSB $sr $sr] return $sr } - - diff --git a/tcl/board/adsp-sc584-ezbrd.cfg b/tcl/board/adsp-sc584-ezbrd.cfg index 439fe92..82df381 100644 --- a/tcl/board/adsp-sc584-ezbrd.cfg +++ b/tcl/board/adsp-sc584-ezbrd.cfg @@ -28,4 +28,3 @@ transport select swd adapter speed 400 source [find target/adsp-sc58x.cfg] - diff --git a/tcl/board/altera_sockit.cfg b/tcl/board/altera_sockit.cfg index 3fd01be..eb4c863 100644 --- a/tcl/board/altera_sockit.cfg +++ b/tcl/board/altera_sockit.cfg @@ -16,4 +16,3 @@ source [find target/altera_fpgasoc.cfg] #usb_blaster_device_desc "USB-Blaster II" adapter speed 100 - diff --git a/tcl/board/am3517evm.cfg b/tcl/board/am3517evm.cfg index 2bff512..8d6eba1 100644 --- a/tcl/board/am3517evm.cfg +++ b/tcl/board/am3517evm.cfg @@ -18,4 +18,3 @@ source [find target/amdm37x.cfg] reset_config trst_only # "amdm37x_dbginit am35x.cpu" needs to be run after init. - diff --git a/tcl/board/arm_evaluator7t.cfg b/tcl/board/arm_evaluator7t.cfg index 52de57a..96d859c 100644 --- a/tcl/board/arm_evaluator7t.cfg +++ b/tcl/board/arm_evaluator7t.cfg @@ -7,4 +7,3 @@ source [find target/samsung_s3c4510.cfg] # Add (A) sdram configuration # Add (B) flash cfi programing configuration # - diff --git a/tcl/board/at91cap7a-stk-sdram.cfg b/tcl/board/at91cap7a-stk-sdram.cfg index a0e393f..df91a6b 100644 --- a/tcl/board/at91cap7a-stk-sdram.cfg +++ b/tcl/board/at91cap7a-stk-sdram.cfg @@ -162,4 +162,3 @@ arm7_9 fast_memory_access enable #set _FLASHNAME $_CHIPNAME.flash #flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 - diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg index 773c889..e801876 100644 --- a/tcl/board/at91sam9g20-ek.cfg +++ b/tcl/board/at91sam9g20-ek.cfg @@ -216,4 +216,3 @@ proc at91sam9g20_reset_init { } { mww 0xffffea04 0x0000039c } - diff --git a/tcl/board/atmel_at91sam7s-ek.cfg b/tcl/board/atmel_at91sam7s-ek.cfg index d7e8486..48edfc9 100644 --- a/tcl/board/atmel_at91sam7s-ek.cfg +++ b/tcl/board/atmel_at91sam7s-ek.cfg @@ -4,5 +4,3 @@ set CHIPNAME at91sam7s256 source [find target/at91sam7sx.cfg] - - diff --git a/tcl/board/atmel_sam3u_ek.cfg b/tcl/board/atmel_sam3u_ek.cfg index 13d930b..1584879 100644 --- a/tcl/board/atmel_sam3u_ek.cfg +++ b/tcl/board/atmel_sam3u_ek.cfg @@ -1,4 +1,3 @@ source [find target/at91sam3u4e.cfg] reset_config srst_only - diff --git a/tcl/board/bcm28155_ap.cfg b/tcl/board/bcm28155_ap.cfg index 770ff9c..5d3d22a 100644 --- a/tcl/board/bcm28155_ap.cfg +++ b/tcl/board/bcm28155_ap.cfg @@ -6,4 +6,3 @@ set CHIPNAME bcm28155 source [find target/bcm281xx.cfg] reset_config trst_and_srst - diff --git a/tcl/board/colibri.cfg b/tcl/board/colibri.cfg index fe9a3d5..0f30afd 100644 --- a/tcl/board/colibri.cfg +++ b/tcl/board/colibri.cfg @@ -7,7 +7,3 @@ adapter srst pulse_width 40 # the bank is 32-bits wide, two 16-bit chips in parallel set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME - - - - diff --git a/tcl/board/dm365evm.cfg b/tcl/board/dm365evm.cfg index ed34c4b..3b29dd8 100644 --- a/tcl/board/dm365evm.cfg +++ b/tcl/board/dm365evm.cfg @@ -143,5 +143,3 @@ proc dm365evm_init {} { flashprobe } - - diff --git a/tcl/board/eir.cfg b/tcl/board/eir.cfg index a014e11..422db0d 100644 --- a/tcl/board/eir.cfg +++ b/tcl/board/eir.cfg @@ -91,4 +91,3 @@ $_TARGETNAME configure -event reset-init { # mww 0xfffffd08 0xa5000001 } - diff --git a/tcl/board/embedded-artists_lpc2478-32.cfg b/tcl/board/embedded-artists_lpc2478-32.cfg index 6c3aec6..8ef9179 100644 --- a/tcl/board/embedded-artists_lpc2478-32.cfg +++ b/tcl/board/embedded-artists_lpc2478-32.cfg @@ -151,4 +151,3 @@ proc enable_pll {} { mww 0xE01FC08C 0x000000AA ;# PLLFEED mww 0xE01FC08C 0x00000055 ;# PLLFEED } - diff --git a/tcl/board/glyn_tonga2.cfg b/tcl/board/glyn_tonga2.cfg index 31aa9ff..f48702c 100644 --- a/tcl/board/glyn_tonga2.cfg +++ b/tcl/board/glyn_tonga2.cfg @@ -197,4 +197,3 @@ proc tonga2_init { } { ####################### # TODO: Implement NAND support. - diff --git a/tcl/board/hitex_lpc1768stick.cfg b/tcl/board/hitex_lpc1768stick.cfg index 8c11936..ac176ca 100644 --- a/tcl/board/hitex_lpc1768stick.cfg +++ b/tcl/board/hitex_lpc1768stick.cfg @@ -12,4 +12,3 @@ source [find target/lpc17xx.cfg] # startup @ 500kHz adapter speed 500 - diff --git a/tcl/board/hitex_lpc2929.cfg b/tcl/board/hitex_lpc2929.cfg index f517798..2fe1f3c 100644 --- a/tcl/board/hitex_lpc2929.cfg +++ b/tcl/board/hitex_lpc2929.cfg @@ -103,4 +103,3 @@ $_TARGETNAME configure -event reset-init { mww 0x600000CC 0x0000000C ;# Bank7 WST2=8 mww 0x600000C4 0x00000002 ;# Bank7 IDCY=2 } - diff --git a/tcl/board/hitex_stm32-performancestick.cfg b/tcl/board/hitex_stm32-performancestick.cfg index 738178a..74dc583 100644 --- a/tcl/board/hitex_stm32-performancestick.cfg +++ b/tcl/board/hitex_stm32-performancestick.cfg @@ -13,4 +13,3 @@ jtag newtap str750 cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id 0x4f1f0 # for some reason this board like to startup @ 500kHz adapter speed 500 - diff --git a/tcl/board/iar_lpc1768.cfg b/tcl/board/iar_lpc1768.cfg index d8c8c2d..38ffc35 100644 --- a/tcl/board/iar_lpc1768.cfg +++ b/tcl/board/iar_lpc1768.cfg @@ -14,4 +14,3 @@ $_TARGETNAME configure -event reset-init { flash probe 0 } - diff --git a/tcl/board/icnova_sam9g45_sodimm.cfg b/tcl/board/icnova_sam9g45_sodimm.cfg index bf70cca..30dc347 100644 --- a/tcl/board/icnova_sam9g45_sodimm.cfg +++ b/tcl/board/icnova_sam9g45_sodimm.cfg @@ -274,5 +274,3 @@ proc at91sam9g45_init { } { arm7_9 fast_memory_access enable } - - diff --git a/tcl/board/keil_mcb1700.cfg b/tcl/board/keil_mcb1700.cfg index d63d3ed..05f12df 100644 --- a/tcl/board/keil_mcb1700.cfg +++ b/tcl/board/keil_mcb1700.cfg @@ -5,4 +5,3 @@ # source [find target/lpc17xx.cfg] - diff --git a/tcl/board/keil_mcb2140.cfg b/tcl/board/keil_mcb2140.cfg index db81efa..bb41a2a 100644 --- a/tcl/board/keil_mcb2140.cfg +++ b/tcl/board/keil_mcb2140.cfg @@ -5,4 +5,3 @@ # source [find target/lpc2148.cfg] - diff --git a/tcl/board/linksys_nslu2.cfg b/tcl/board/linksys_nslu2.cfg index e605fc1..0b0f58b 100644 --- a/tcl/board/linksys_nslu2.cfg +++ b/tcl/board/linksys_nslu2.cfg @@ -5,4 +5,3 @@ source [find target/ixp42x.cfg] # The _TARGETNAME is set by the above. $_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0 - diff --git a/tcl/board/microchip_same54_xplained_pro.cfg b/tcl/board/microchip_same54_xplained_pro.cfg index db8a856..7482de4 100644 --- a/tcl/board/microchip_same54_xplained_pro.cfg +++ b/tcl/board/microchip_same54_xplained_pro.cfg @@ -10,4 +10,3 @@ set CHIPNAME same54 source [find target/atsame5x.cfg] reset_config srst_only - diff --git a/tcl/board/novena-internal-fpga.cfg b/tcl/board/novena-internal-fpga.cfg index 24a76dc..0e9ff5b 100644 --- a/tcl/board/novena-internal-fpga.cfg +++ b/tcl/board/novena-internal-fpga.cfg @@ -22,4 +22,3 @@ transport select jtag sysfsgpio_jtag_nums 136 139 137 138 source [find cpld/xilinx-xc6s.cfg] - diff --git a/tcl/board/olimex_LPC2378STK.cfg b/tcl/board/olimex_LPC2378STK.cfg index a4b422d..7e9e58e 100644 --- a/tcl/board/olimex_LPC2378STK.cfg +++ b/tcl/board/olimex_LPC2378STK.cfg @@ -8,4 +8,3 @@ # source [find target/lpc2378.cfg] - diff --git a/tcl/board/olimex_lpc_h2148.cfg b/tcl/board/olimex_lpc_h2148.cfg index 7833fde..d8fb5be 100644 --- a/tcl/board/olimex_lpc_h2148.cfg +++ b/tcl/board/olimex_lpc_h2148.cfg @@ -5,4 +5,3 @@ # source [find target/lpc2148.cfg] - diff --git a/tcl/board/olimex_sam7_ex256.cfg b/tcl/board/olimex_sam7_ex256.cfg index 5f83629..426ead6 100644 --- a/tcl/board/olimex_sam7_ex256.cfg +++ b/tcl/board/olimex_sam7_ex256.cfg @@ -1,4 +1,3 @@ # Olimex SAM7-EX256 has a single Atmel at91sam7ex256 on it. source [find target/sam7x256.cfg] - diff --git a/tcl/board/openrd.cfg b/tcl/board/openrd.cfg index 696af4e..fda01d1 100644 --- a/tcl/board/openrd.cfg +++ b/tcl/board/openrd.cfg @@ -122,4 +122,3 @@ proc openrd_load_uboot { } { resume 0x00600000 } - diff --git a/tcl/board/sheevaplug.cfg b/tcl/board/sheevaplug.cfg index 7ccb884..4551637 100644 --- a/tcl/board/sheevaplug.cfg +++ b/tcl/board/sheevaplug.cfg @@ -133,4 +133,3 @@ proc sheevaplug_load_uboot { } { resume 0x00600000 } - diff --git a/tcl/board/ti_beagleboard_xm.cfg b/tcl/board/ti_beagleboard_xm.cfg index e4e93e3..683f583 100644 --- a/tcl/board/ti_beagleboard_xm.cfg +++ b/tcl/board/ti_beagleboard_xm.cfg @@ -9,4 +9,3 @@ source [find target/amdm37x.cfg] reset_config trst_only # "amdm37x_dbginit dm37x.cpu" needs to be run after init. - diff --git a/tcl/board/ti_beaglebone.cfg b/tcl/board/ti_beaglebone.cfg index 6a6272d..7ba8c50 100644 --- a/tcl/board/ti_beaglebone.cfg +++ b/tcl/board/ti_beaglebone.cfg @@ -9,5 +9,3 @@ adapter speed 16000 reset_config trst_and_srst source [find board/ti_beaglebone-base.cfg] - - diff --git a/tcl/board/ti_blaze.cfg b/tcl/board/ti_blaze.cfg index c9bbe25..4881389 100644 --- a/tcl/board/ti_blaze.cfg +++ b/tcl/board/ti_blaze.cfg @@ -3,4 +3,3 @@ jtag_rclk 6000 source [find target/omap4430.cfg] reset_config trst_and_srst - diff --git a/tcl/board/ti_pandaboard.cfg b/tcl/board/ti_pandaboard.cfg index bd2cd37..bc92596 100644 --- a/tcl/board/ti_pandaboard.cfg +++ b/tcl/board/ti_pandaboard.cfg @@ -3,4 +3,3 @@ jtag_rclk 6000 source [find target/omap4430.cfg] reset_config trst_only - diff --git a/tcl/board/ti_pandaboard_es.cfg b/tcl/board/ti_pandaboard_es.cfg index 2abd7e9..756fa33 100644 --- a/tcl/board/ti_pandaboard_es.cfg +++ b/tcl/board/ti_pandaboard_es.cfg @@ -3,4 +3,3 @@ jtag_rclk 6000 source [find target/omap4460.cfg] reset_config trst_only - diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg index 91ee584..5bd0e5e 100644 --- a/tcl/board/topasa900.cfg +++ b/tcl/board/topasa900.cfg @@ -123,4 +123,3 @@ arm7_9 dcc_downloads enable ;# Enable faster DCC downloads #flash bank <name> cfi <base> <size> <chip width> <bus width> <target> set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0x20000000 0x1000000 2 2 $_TARGETNAME - diff --git a/tcl/board/unknown_at91sam9260.cfg b/tcl/board/unknown_at91sam9260.cfg index de49a69..5570ef0 100644 --- a/tcl/board/unknown_at91sam9260.cfg +++ b/tcl/board/unknown_at91sam9260.cfg @@ -93,5 +93,3 @@ $_TARGETNAME configure -event reset-init { #flash bank <name> cfi <base> <size> <chip width> <bus width> <target> set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME - - diff --git a/tcl/board/uptech_2410.cfg b/tcl/board/uptech_2410.cfg index 950f2a7..680cfd7 100644 --- a/tcl/board/uptech_2410.cfg +++ b/tcl/board/uptech_2410.cfg @@ -61,5 +61,3 @@ proc uptech2410_init { } { set _NANDNAME $_CHIPNAME.nand nand device $_NANDNAME s3c2410 $_TARGETNAME - - diff --git a/tcl/board/voltcraft_dso-3062c.cfg b/tcl/board/voltcraft_dso-3062c.cfg index 01879b1..f300cf2 100644 --- a/tcl/board/voltcraft_dso-3062c.cfg +++ b/tcl/board/voltcraft_dso-3062c.cfg @@ -28,4 +28,3 @@ scan_chain targets nand probe 0 nand list - diff --git a/tcl/chip/atmel/at91/aic.tcl b/tcl/chip/atmel/at91/aic.tcl index 6dae36a..ba0f2a9 100644 --- a/tcl/chip/atmel/at91/aic.tcl +++ b/tcl/chip/atmel/at91/aic.tcl @@ -98,4 +98,3 @@ proc show_AIC { } { } } } - diff --git a/tcl/chip/atmel/at91/at91sam9263_matrix.cfg b/tcl/chip/atmel/at91/at91sam9263_matrix.cfg index ad3d9a2..f287cd9 100644 --- a/tcl/chip/atmel/at91/at91sam9263_matrix.cfg +++ b/tcl/chip/atmel/at91/at91sam9263_matrix.cfg @@ -108,5 +108,3 @@ set AT91_MATRIX_EBI1_DBPUC [expr (1 << 8)] ;# Data Bus Pull-up Configuration set AT91_MATRIX_EBI1_VDDIOMSEL [expr (1 << 16)] ;# Memory voltage selection set AT91_MATRIX_EBI1_VDDIOMSEL_1_8V [expr (0 << 16)] set AT91_MATRIX_EBI1_VDDIOMSEL_3_3V [expr (1 << 16)] - - diff --git a/tcl/chip/atmel/at91/pmc.tcl b/tcl/chip/atmel/at91/pmc.tcl index 584acb8..7cb1d09 100644 --- a/tcl/chip/atmel/at91/pmc.tcl +++ b/tcl/chip/atmel/at91/pmc.tcl @@ -14,4 +14,3 @@ if [info exists AT91C_SLOWOSC_FREQ] { set AT91C_SLOWOSC_FREQ 32768 } global AT91C_SLOWOSC_FREQ - diff --git a/tcl/chip/atmel/at91/rtt.tcl b/tcl/chip/atmel/at91/rtt.tcl index 8be6a56..2dd74fa 100644 --- a/tcl/chip/atmel/at91/rtt.tcl +++ b/tcl/chip/atmel/at91/rtt.tcl @@ -53,4 +53,3 @@ proc show_RTTC { } { show_mmr32_reg RTTC_RTVR show_mmr32_reg RTTC_RTSR } - diff --git a/tcl/chip/atmel/at91/usarts.tcl b/tcl/chip/atmel/at91/usarts.tcl index 6842029..ecc4f60 100644 --- a/tcl/chip/atmel/at91/usarts.tcl +++ b/tcl/chip/atmel/at91/usarts.tcl @@ -130,6 +130,3 @@ proc show_DBGU { } $str unset str proc show_DBGU_MR_helper { NAME ADDR VAL } { show_mmr_USx_MR_helper $NAME $ADDR $VAL } - - - diff --git a/tcl/cpu/arm/arm7tdmi.tcl b/tcl/cpu/arm/arm7tdmi.tcl index 37db266..a1d4a1f 100644 --- a/tcl/cpu/arm/arm7tdmi.tcl +++ b/tcl/cpu/arm/arm7tdmi.tcl @@ -3,4 +3,3 @@ set CPU_NAME arm7tdmi set CPU_ARCH armv4t set CPU_MAX_ADDRESS 0xFFFFFFFF set CPU_NBITS 32 - diff --git a/tcl/cpu/arm/arm920.tcl b/tcl/cpu/arm/arm920.tcl index f19b20b..c01f602 100644 --- a/tcl/cpu/arm/arm920.tcl +++ b/tcl/cpu/arm/arm920.tcl @@ -3,4 +3,3 @@ set CPU_NAME arm920 set CPU_ARCH armv4t set CPU_MAX_ADDRESS 0xFFFFFFFF set CPU_NBITS 32 - diff --git a/tcl/cpu/arm/arm946.tcl b/tcl/cpu/arm/arm946.tcl index 5204101..a6110a5 100644 --- a/tcl/cpu/arm/arm946.tcl +++ b/tcl/cpu/arm/arm946.tcl @@ -3,4 +3,3 @@ set CPU_NAME arm946 set CPU_ARCH armv5te set CPU_MAX_ADDRESS 0xFFFFFFFF set CPU_NBITS 32 - diff --git a/tcl/cpu/arm/arm966.tcl b/tcl/cpu/arm/arm966.tcl index 83ce0f6..1fffbc0 100644 --- a/tcl/cpu/arm/arm966.tcl +++ b/tcl/cpu/arm/arm966.tcl @@ -3,4 +3,3 @@ set CPU_NAME arm966 set CPU_ARCH armv5te set CPU_MAX_ADDRESS 0xFFFFFFFF set CPU_NBITS 32 - diff --git a/tcl/cpu/arm/cortex_m3.tcl b/tcl/cpu/arm/cortex_m3.tcl index 166af84..c995026 100644 --- a/tcl/cpu/arm/cortex_m3.tcl +++ b/tcl/cpu/arm/cortex_m3.tcl @@ -3,4 +3,3 @@ set CPU_NAME cortex_m3 set CPU_ARCH armv7 set CPU_MAX_ADDRESS 0xFFFFFFFF set CPU_NBITS 32 - diff --git a/tcl/interface/arm-jtag-ew.cfg b/tcl/interface/arm-jtag-ew.cfg index 250592f..797bb71 100644 --- a/tcl/interface/arm-jtag-ew.cfg +++ b/tcl/interface/arm-jtag-ew.cfg @@ -5,4 +5,3 @@ # adapter driver arm-jtag-ew - diff --git a/tcl/interface/at91rm9200.cfg b/tcl/interface/at91rm9200.cfg index 0561dac..b66e060 100644 --- a/tcl/interface/at91rm9200.cfg +++ b/tcl/interface/at91rm9200.cfg @@ -6,4 +6,3 @@ adapter driver at91rm9200 at91rm9200_device rea_ecr - diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg index b02d29d..265e37e 100644 --- a/tcl/interface/buspirate.cfg +++ b/tcl/interface/buspirate.cfg @@ -23,4 +23,3 @@ buspirate_speed normal ;# or fast # this depends on the cable, you are safe with this option reset_config srst_only - diff --git a/tcl/interface/calao-usb-a9260.cfg b/tcl/interface/calao-usb-a9260.cfg index d1dc736..01b426b 100644 --- a/tcl/interface/calao-usb-a9260.cfg +++ b/tcl/interface/calao-usb-a9260.cfg @@ -8,4 +8,3 @@ adapter srst delay 200 jtag_ntrst_delay 200 - diff --git a/tcl/interface/chameleon.cfg b/tcl/interface/chameleon.cfg index f523ee7..1cb1d61 100644 --- a/tcl/interface/chameleon.cfg +++ b/tcl/interface/chameleon.cfg @@ -6,4 +6,3 @@ adapter driver parport parport_cable chameleon - diff --git a/tcl/interface/dummy.cfg b/tcl/interface/dummy.cfg index 6c2fe5f..154c872 100644 --- a/tcl/interface/dummy.cfg +++ b/tcl/interface/dummy.cfg @@ -3,4 +3,3 @@ # adapter driver dummy - diff --git a/tcl/interface/ftdi/hitex_lpc1768stick.cfg b/tcl/interface/ftdi/hitex_lpc1768stick.cfg index 3f49522..9fe80f1 100644 --- a/tcl/interface/ftdi/hitex_lpc1768stick.cfg +++ b/tcl/interface/ftdi/hitex_lpc1768stick.cfg @@ -12,4 +12,3 @@ ftdi_vid_pid 0x0640 0x0026 ftdi_layout_init 0x0388 0x038b ftdi_layout_signal nTRST -data 0x0100 ftdi_layout_signal nSRST -data 0x0080 -noe 0x200 - diff --git a/tcl/interface/parport_dlc5.cfg b/tcl/interface/parport_dlc5.cfg index b1aa0a9..e9beaaf 100644 --- a/tcl/interface/parport_dlc5.cfg +++ b/tcl/interface/parport_dlc5.cfg @@ -13,4 +13,3 @@ if { [info exists PARPORTADDR] } { adapter driver parport parport_port $_PARPORTADDR parport_cable dlc5 - diff --git a/tcl/interface/rlink.cfg b/tcl/interface/rlink.cfg index 3fe90ab..29d3ce5 100644 --- a/tcl/interface/rlink.cfg +++ b/tcl/interface/rlink.cfg @@ -5,4 +5,3 @@ # adapter driver rlink - diff --git a/tcl/interface/stlink.cfg b/tcl/interface/stlink.cfg index e9a7b17..54cd63e 100644 --- a/tcl/interface/stlink.cfg +++ b/tcl/interface/stlink.cfg @@ -14,4 +14,3 @@ hla_vid_pid 0x0483 0x3744 0x0483 0x3748 0x0483 0x374b 0x0483 0x374d 0x0483 0x374 # number reset issues. # eg. #hla_serial "\xaa\xbc\x6e\x06\x50\x75\xff\x55\x17\x42\x19\x3f" - diff --git a/tcl/interface/vsllink.cfg b/tcl/interface/vsllink.cfg index a587176..d40dbb4 100644 --- a/tcl/interface/vsllink.cfg +++ b/tcl/interface/vsllink.cfg @@ -5,4 +5,3 @@ # adapter driver vsllink - diff --git a/tcl/target/adsp-sc58x.cfg b/tcl/target/adsp-sc58x.cfg index 8c9ef12..6073bb2 100644 --- a/tcl/target/adsp-sc58x.cfg +++ b/tcl/target/adsp-sc58x.cfg @@ -50,4 +50,3 @@ proc sc58x_enabledebug {} { # it is not possible to halt the target unless these bits have been set ap0.mem mww 0x31131000 0xFFFF } - diff --git a/tcl/target/amdm37x.cfg b/tcl/target/amdm37x.cfg index 7098adf..3db24b4 100644 --- a/tcl/target/amdm37x.cfg +++ b/tcl/target/amdm37x.cfg @@ -209,4 +209,3 @@ proc amdm37x_dbginit {target} { # at this address and this bit. $target mww phys 0x5401d030 0x00002000 } - diff --git a/tcl/target/ar71xx.cfg b/tcl/target/ar71xx.cfg index 0c64a96..57833f4 100644 --- a/tcl/target/ar71xx.cfg +++ b/tcl/target/ar71xx.cfg @@ -54,4 +54,3 @@ $_TARGETNAME configure -work-area-phys 0xa0600000 -work-area-size 0x20000 # serial SPI capable flash # flash bank <driver> <base> <size> <chip_width> <bus_width> - diff --git a/tcl/target/armada370.cfg b/tcl/target/armada370.cfg index 5b84637..3b4be9f 100644 --- a/tcl/target/armada370.cfg +++ b/tcl/target/armada370.cfg @@ -31,4 +31,3 @@ $_TARGETNAME configure -event reset-assert-post "armada370_dbginit $_TARGETNAME" # We need to init now, so we can run the apsel command. init dap apsel 1 - diff --git a/tcl/target/at91sam3ax_8x.cfg b/tcl/target/at91sam3ax_8x.cfg index e249383..2bb66fb 100644 --- a/tcl/target/at91sam3ax_8x.cfg +++ b/tcl/target/at91sam3ax_8x.cfg @@ -7,5 +7,3 @@ flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME # This is a 512K chip - it has the 2nd bank set _FLASHNAME $_CHIPNAME.flash1 flash bank $_FLASHNAME at91sam3 0x0000C0000 0 1 1 $_TARGETNAME - - diff --git a/tcl/target/at91sam3ax_xx.cfg b/tcl/target/at91sam3ax_xx.cfg index e561771..5e01d66 100644 --- a/tcl/target/at91sam3ax_xx.cfg +++ b/tcl/target/at91sam3ax_xx.cfg @@ -8,4 +8,3 @@ # at91sam3X8E # at91sam3X8H source [find target/at91sam3XXX.cfg] - diff --git a/tcl/target/at91sam3u1c.cfg b/tcl/target/at91sam3u1c.cfg index 47c227b..dc5c82c 100644 --- a/tcl/target/at91sam3u1c.cfg +++ b/tcl/target/at91sam3u1c.cfg @@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME - - diff --git a/tcl/target/at91sam3u1e.cfg b/tcl/target/at91sam3u1e.cfg index 47c227b..dc5c82c 100644 --- a/tcl/target/at91sam3u1e.cfg +++ b/tcl/target/at91sam3u1e.cfg @@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME - - diff --git a/tcl/target/at91sam3u2c.cfg b/tcl/target/at91sam3u2c.cfg index 47c227b..dc5c82c 100644 --- a/tcl/target/at91sam3u2c.cfg +++ b/tcl/target/at91sam3u2c.cfg @@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME - - diff --git a/tcl/target/at91sam3u2e.cfg b/tcl/target/at91sam3u2e.cfg index 47c227b..dc5c82c 100644 --- a/tcl/target/at91sam3u2e.cfg +++ b/tcl/target/at91sam3u2e.cfg @@ -4,5 +4,3 @@ source [find target/at91sam3uxx.cfg] # size is automatically "calculated" by probing set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME - - diff --git a/tcl/target/at91sam3u4c.cfg b/tcl/target/at91sam3u4c.cfg index 5cacbcb..14af008 100644 --- a/tcl/target/at91sam3u4c.cfg +++ b/tcl/target/at91sam3u4c.cfg @@ -7,5 +7,3 @@ flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME # This is a 256K chip, it has the 2nd bank set _FLASHNAME $_CHIPNAME.flash1 flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME - - diff --git a/tcl/target/at91sam3u4e.cfg b/tcl/target/at91sam3u4e.cfg index a48f992..fbe2dd9 100644 --- a/tcl/target/at91sam3u4e.cfg +++ b/tcl/target/at91sam3u4e.cfg @@ -7,5 +7,3 @@ flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME # This is a 256K chip - it has the 2nd bank set _FLASHNAME $_CHIPNAME.flash1 flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME - - diff --git a/tcl/target/at91sam3uxx.cfg b/tcl/target/at91sam3uxx.cfg index b42ae19..5b1748b 100644 --- a/tcl/target/at91sam3uxx.cfg +++ b/tcl/target/at91sam3uxx.cfg @@ -8,4 +8,3 @@ # at91sam3u1c source [find target/at91sam3XXX.cfg] - diff --git a/tcl/target/at91sam7se512.cfg b/tcl/target/at91sam7se512.cfg index ab09701..61b4781 100644 --- a/tcl/target/at91sam7se512.cfg +++ b/tcl/target/at91sam7se512.cfg @@ -36,4 +36,3 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a #flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>] set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 - diff --git a/tcl/target/atsamv.cfg b/tcl/target/atsamv.cfg index 4c136ea..fdd8354 100644 --- a/tcl/target/atsamv.cfg +++ b/tcl/target/atsamv.cfg @@ -57,4 +57,3 @@ if {![using_hla]} { set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME atsamv 0x00400000 0 0 0 $_TARGETNAME - diff --git a/tcl/target/avr32.cfg b/tcl/target/avr32.cfg index 7808127..8295f5e 100644 --- a/tcl/target/avr32.cfg +++ b/tcl/target/avr32.cfg @@ -14,4 +14,3 @@ jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_CP set _TARGETNAME [format "%s.cpu" $_CHIPNAME] target create $_TARGETNAME avr32_ap7k -endian $_ENDIAN -chain-position $_TARGETNAME - diff --git a/tcl/target/cs351x.cfg b/tcl/target/cs351x.cfg index cb05da2..8fabda6 100644 --- a/tcl/target/cs351x.cfg +++ b/tcl/target/cs351x.cfg @@ -28,4 +28,3 @@ target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME # This chip has a DCC ... use it arm7_9 dcc_downloads enable - diff --git a/tcl/target/dragonite.cfg b/tcl/target/dragonite.cfg index 1277cca..b9d73a2 100644 --- a/tcl/target/dragonite.cfg +++ b/tcl/target/dragonite.cfg @@ -28,4 +28,3 @@ target create $_TARGETNAME dragonite -endian $_ENDIAN -chain-position $_TARGETNA reset_config trst_and_srst adapter srst delay 200 jtag_ntrst_delay 200 - diff --git a/tcl/target/dsp568013.cfg b/tcl/target/dsp568013.cfg index 98110c2..c0c1df2 100644 --- a/tcl/target/dsp568013.cfg +++ b/tcl/target/dsp568013.cfg @@ -73,4 +73,3 @@ $_TARGETNAME configure -work-area-virt 0 #setup flash set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME dsp5680xx_flash 0 0 2 1 $_TARGETNAME - diff --git a/tcl/target/dsp568037.cfg b/tcl/target/dsp568037.cfg index 010d06f..fc57bd4 100644 --- a/tcl/target/dsp568037.cfg +++ b/tcl/target/dsp568037.cfg @@ -69,4 +69,3 @@ $_TARGETNAME configure -work-area-virt 0 #setup flash set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME dsp5680xx_flash 0 0 2 1 $_TARGETNAME - diff --git a/tcl/target/feroceon.cfg b/tcl/target/feroceon.cfg index b934426..d4f710e 100644 --- a/tcl/target/feroceon.cfg +++ b/tcl/target/feroceon.cfg @@ -28,4 +28,3 @@ target create $_TARGETNAME feroceon -endian $_ENDIAN -chain-position $_TARGETNAM reset_config trst_and_srst adapter srst delay 200 jtag_ntrst_delay 200 - diff --git a/tcl/target/hilscher_netx10.cfg b/tcl/target/hilscher_netx10.cfg index 3f96607..668de8f 100644 --- a/tcl/target/hilscher_netx10.cfg +++ b/tcl/target/hilscher_netx10.cfg @@ -28,4 +28,3 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP # that TAP is associated with a target set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME - diff --git a/tcl/target/icepick.cfg b/tcl/target/icepick.cfg index a945bea..36b0b70 100644 --- a/tcl/target/icepick.cfg +++ b/tcl/target/icepick.cfg @@ -140,4 +140,3 @@ proc icepick_c_wreset {jrc} { # send a router write, block is 0, register is 1, value is 0x2100 icepick_c_router $jrc 1 0x0 0x1 0x002101 } - diff --git a/tcl/target/ixp42x.cfg b/tcl/target/ixp42x.cfg index d7b5bf4..3f86e35 100644 --- a/tcl/target/ixp42x.cfg +++ b/tcl/target/ixp42x.cfg @@ -104,4 +104,3 @@ proc ixp42x_init_sdram { SDRAM_CFG REFRESH CASLAT } { proc ixp42x_set_bigendian { } { reg XSCALE_CTRL 0xF8 } - diff --git a/tcl/target/kx.cfg b/tcl/target/kx.cfg index 1dd5d31..9fda4ed 100644 --- a/tcl/target/kx.cfg +++ b/tcl/target/kx.cfg @@ -79,4 +79,3 @@ if {[using_hla]} { $_TARGETNAME configure -event reset-init { kinetis disable_wdog } - diff --git a/tcl/target/readme.txt b/tcl/target/readme.txt index 2c3cc8d..91bb2d5 100644 --- a/tcl/target/readme.txt +++ b/tcl/target/readme.txt @@ -38,4 +38,3 @@ Note that a target/xxx.cfg file can invoke another target/yyy.cfg file, so one can create target subtype configurations where e.g. only amount of DRAM, oscillator speeds differ and having a single config file for the default/common settings. - diff --git a/tcl/target/samsung_s3c2440.cfg b/tcl/target/samsung_s3c2440.cfg index 2a0a915..a97659b 100644 --- a/tcl/target/samsung_s3c2440.cfg +++ b/tcl/target/samsung_s3c2440.cfg @@ -32,4 +32,3 @@ $_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-are #reset configuration reset_config trst_and_srst - diff --git a/tcl/target/samsung_s3c4510.cfg b/tcl/target/samsung_s3c4510.cfg index 461d047..8bc5da5 100644 --- a/tcl/target/samsung_s3c4510.cfg +++ b/tcl/target/samsung_s3c4510.cfg @@ -21,4 +21,3 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME - diff --git a/tcl/target/sharp_lh79532.cfg b/tcl/target/sharp_lh79532.cfg index 6f2cf22..a464839 100644 --- a/tcl/target/sharp_lh79532.cfg +++ b/tcl/target/sharp_lh79532.cfg @@ -22,5 +22,3 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME - - diff --git a/tcl/target/snps_em_sk_fpga.cfg b/tcl/target/snps_em_sk_fpga.cfg index d52c7e8..2f7fecb 100644 --- a/tcl/target/snps_em_sk_fpga.cfg +++ b/tcl/target/snps_em_sk_fpga.cfg @@ -31,4 +31,3 @@ $_TARGETNAME configure -event reset-assert "arc_em_reset $_TARGETNAME" arc_em_init_regs # vim:ft=tcl - diff --git a/tcl/target/stm32f7x.cfg b/tcl/target/stm32f7x.cfg index db1794c..6ad4b65 100644 --- a/tcl/target/stm32f7x.cfg +++ b/tcl/target/stm32f7x.cfg @@ -170,4 +170,3 @@ $_TARGETNAME configure -event reset-start { # Reduce speed since CPU speed will slow down to 16MHz with the reset adapter speed 2000 } - diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg index 9a27194..e9e2f26 100644 --- a/tcl/target/str730.cfg +++ b/tcl/target/str730.cfg @@ -51,4 +51,3 @@ $_TARGETNAME configure -work-area-phys 0xA0000000 -work-area-size 0x4000 -work-a #flash bank <driver> <base> <size> <chip_width> <bus_width> set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME str7x 0x80000000 0x00040000 0 0 $_TARGETNAME STR73x - diff --git a/tcl/target/u8500.cfg b/tcl/target/u8500.cfg index faaf97d..baef9c8 100644 --- a/tcl/target/u8500.cfg +++ b/tcl/target/u8500.cfg @@ -322,5 +322,3 @@ set mem inaccessible-by-default-off jtag_ntrst_delay 100 reset_config trst_and_srst combined - - diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg index 04e615e..2e66188 100644 --- a/tcl/test/syntax1.cfg +++ b/tcl/test/syntax1.cfg @@ -27,4 +27,3 @@ mvb 0xE01FC040 0x01 set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 - |