diff options
| -rw-r--r-- | NEWS | 67 | ||||
| -rw-r--r-- | NEWS-0.3.0 | 82 | ||||
| -rw-r--r-- | configure.in | 2 |
3 files changed, 87 insertions, 64 deletions
@@ -1,74 +1,15 @@ -This file should include highlights of the changes made in the -OpenOCD openocd-0.3.0 source archive release. See the repository -history for details about what changed, including bugfixes and -other issues not mentioned here. +This file includes highlights of the changes made in the +OpenOCD 0.4.0 source archive release. See the repository +history for details about what changed, including bugfixes +and other issues not mentioned here. JTAG Layer: - FT2232H (high speed USB) support doesn't need separate configuration - New FT2232H JTAG adapters: Amontec, Olimex, Signalyzer - New reset_config options for SRST gating the JTAG clock (or not) - TAP declaration no longer requires ircapture and mask attributes - Scan chain setup should be more robust, with better diagnostics - New TAP events: - "post-reset" for TAP-invariant setup code (TAPs not usable yet) - "setup" for use once TAPs are addressable (e.g. with ICEpick) - Overridable Tcl "init_reset" and "jtag_init" procedures - Simple "autoprobe" mechanism to help simplify server setup - Boundary Scan: - SVF bugfixes ... parsing fixes, better STATE switch conformance - XSVF bugfixes ... be more correct, handle Xilinx tool output - Target Layer: - Warn on use of obsolete numeric target IDs - New commands for use with Cortex-M3 processors: - "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format) - "cortex_m3 vector_catch" ... traps certain hardware faults - without tying up breakpoint resources - If you're willing to help debug it - VERY EARLY Cortex-A8 and ARMv7A support - Updated BeagleBoard.org hardware support - you may need to explicitly "reset" after connect-to-Beagle - New commands for use with XScale processors: "xscale vector_table" - ARM - bugfixes to single-stepping Thumb code - ETM: unavailable registers are not listed - ETB, ETM: report actual hardware status - ARM9 - name change: "arm9 vector_catch" not "arm9tdmi vector_catch" - ARM11 - single stepping support for i.MX31 - bugfix for missing "arm11" prefix on "arm11 memwrite ..." - GDB support - gdb_attach command is gone - Flash Layer: - The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips - New drivers: - lpc2900, for NXP LPC2900 chips (ARM968 based) - mx3_nand, for imx31 - New "last" flag for NOR "flash erase_sector" and "flash protect" - The "nand erase N" command now erases all of bank N - Speed up davinci_nand by about 3x - Board, Target, and Interface Configuration Scripts: - Amontec JTAGkey2 support - Cleanup and additions for the TI/Luminary Stellaris scripts - LPC1768 target (and flash) support - Keil MCB1700 eval board - Samsung s3c2450 - Mini2440 board - Numeric TAP and Target identifiers now trigger warnings - PXA255 partially enumerates - Documentation: - Capture more debugging and setup advice - Notes on target source code changes that may help debugging - Build and Release: - Repository moved from SVN at Berlios to GIT at SourceForge - Clean builds on (32-bit) Cygwin - Clean builds on 64-bit MinGW For more details about what has changed since the last release, see the git repository history. With gitweb, you can browse that diff --git a/NEWS-0.3.0 b/NEWS-0.3.0 new file mode 100644 index 0000000..80e8823 --- /dev/null +++ b/NEWS-0.3.0 @@ -0,0 +1,82 @@ +This file should include highlights of the changes made in the +OpenOCD openocd-0.3.0 source archive release. See the repository +history for details about what changed, including bugfixes and +other issues not mentioned here. + +JTAG Layer: + FT2232H (high speed USB) support doesn't need separate configuration + New FT2232H JTAG adapters: Amontec, Olimex, Signalyzer + New reset_config options for SRST gating the JTAG clock (or not) + TAP declaration no longer requires ircapture and mask attributes + Scan chain setup should be more robust, with better diagnostics + New TAP events: + "post-reset" for TAP-invariant setup code (TAPs not usable yet) + "setup" for use once TAPs are addressable (e.g. with ICEpick) + Overridable Tcl "init_reset" and "jtag_init" procedures + Simple "autoprobe" mechanism to help simplify server setup + +Boundary Scan: + SVF bugfixes ... parsing fixes, better STATE switch conformance + XSVF bugfixes ... be more correct, handle Xilinx tool output + +Target Layer: + Warn on use of obsolete numeric target IDs + New commands for use with Cortex-M3 processors: + "cortex_m3 disassemble" ... Thumb2 disassembly (UAL format) + "cortex_m3 vector_catch" ... traps certain hardware faults + without tying up breakpoint resources + If you're willing to help debug it + VERY EARLY Cortex-A8 and ARMv7A support + Updated BeagleBoard.org hardware support + you may need to explicitly "reset" after connect-to-Beagle + New commands for use with XScale processors: "xscale vector_table" + ARM + bugfixes to single-stepping Thumb code + ETM: unavailable registers are not listed + ETB, ETM: report actual hardware status + ARM9 + name change: "arm9 vector_catch" not "arm9tdmi vector_catch" + ARM11 + single stepping support for i.MX31 + bugfix for missing "arm11" prefix on "arm11 memwrite ..." + GDB support + gdb_attach command is gone + +Flash Layer: + The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips + New drivers: + lpc2900, for NXP LPC2900 chips (ARM968 based) + mx3_nand, for imx31 + New "last" flag for NOR "flash erase_sector" and "flash protect" + The "nand erase N" command now erases all of bank N + Speed up davinci_nand by about 3x + +Board, Target, and Interface Configuration Scripts: + Amontec JTAGkey2 support + Cleanup and additions for the TI/Luminary Stellaris scripts + LPC1768 target (and flash) support + Keil MCB1700 eval board + Samsung s3c2450 + Mini2440 board + Numeric TAP and Target identifiers now trigger warnings + PXA255 partially enumerates + +Documentation: + Capture more debugging and setup advice + Notes on target source code changes that may help debugging + +Build and Release: + Repository moved from SVN at Berlios to GIT at SourceForge + Clean builds on (32-bit) Cygwin + Clean builds on 64-bit MinGW + +For more details about what has changed since the last release, +see the git repository history. With gitweb, you can browse that +in various levels of detail. + +For older NEWS, see the NEWS files associated with each release +(i.e. NEWS-<version>). + +For more information about contributing test reports, bug fixes, or new +features and device support, please read the new Developer Manual (or +the BUGS and PATCHES files in the source archive). diff --git a/configure.in b/configure.in index 08212e8..d7f8d47 100644 --- a/configure.in +++ b/configure.in @@ -1,5 +1,5 @@ AC_PREREQ(2.60) -AC_INIT([openocd], [0.3.0], +AC_INIT([openocd], [0.4.0-dev], [OpenOCD Mailing List <openocd-development@lists.berlios.de>]) AC_CONFIG_SRCDIR([src/openocd.c]) |