- add missing svn props and fix incorrect line endings from last commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1321 b42882b7-edfa-0310-969c-e2dbd0fdcd60

4 files changed, 234 insertions, 237 deletions

diff --git a/testing/examples/ledtest-imx31pdk/Makefile b/testing/examples/ledtest-imx31pdk/Makefile
index fc643ad..74e2fc2 100644
--- a/testing/examples/ledtest-imx31pdk/Makefile
+++ b/testing/examples/ledtest-imx31pdk/Makefile
@@ -1,42 +1,42 @@
-# $Header: $

-# This will make the test program for ARM.

-

-PROC=arm

-TYPE=none-linux-gnueabi

-LDSCRIPT=ldscript

-

-PATH:=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/:$(PATH)

-CC=$(PROC)-$(TYPE)-gcc

-AS=$(PROC)-$(TYPE)-as

-AR=$(PROC)-$(TYPE)-ar

-LD=$(PROC)-$(TYPE)-ld

-NM=$(PROC)-$(TYPE)-nm

-OBJDUMP=$(PROC)-$(TYPE)-objdump

-CFLAGS= -g -c -mcpu=arm1136j-s

-

-all: test.elf

-

-# Make a little endian image:

-# In Eclipse, add the line :

-#    source gdbinit 

-# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)

-# To start gdb from a window use : arm-elf-gdb --command=gdbinit

-test.elf: test.c Makefile ldscript crt0.S

-	$(CC) $(CFLAGS) -o crt0.o crt0.S

-	$(CC) $(CFLAGS) -o test.o test.c

-	$(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o 

-	$(NM) test.elf

-

-	

-dump:

-	$(OBJDUMP) --all-headers test.elf

-

-dump_test:

-	$(OBJDUMP) --disassemble test.elf

-

-dump_full:

-	$(OBJDUMP) --full-contents test.elf

-

-clean:

-	-/bin/rm -f *.o *~ test.elf

-

+# $Header: $
+# This will make the test program for ARM.
+
+PROC=arm
+TYPE=none-linux-gnueabi
+LDSCRIPT=ldscript
+
+PATH:=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/:$(PATH)
+CC=$(PROC)-$(TYPE)-gcc
+AS=$(PROC)-$(TYPE)-as
+AR=$(PROC)-$(TYPE)-ar
+LD=$(PROC)-$(TYPE)-ld
+NM=$(PROC)-$(TYPE)-nm
+OBJDUMP=$(PROC)-$(TYPE)-objdump
+CFLAGS= -g -c -mcpu=arm1136j-s
+
+all: test.elf
+
+# Make a little endian image:
+# In Eclipse, add the line :
+#    source gdbinit 
+# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)
+# To start gdb from a window use : arm-elf-gdb --command=gdbinit
+test.elf: test.c Makefile ldscript crt0.S
+	$(CC) $(CFLAGS) -o crt0.o crt0.S
+	$(CC) $(CFLAGS) -o test.o test.c
+	$(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o 
+	$(NM) test.elf
+
+	
+dump:
+	$(OBJDUMP) --all-headers test.elf
+
+dump_test:
+	$(OBJDUMP) --disassemble test.elf
+
+dump_full:
+	$(OBJDUMP) --full-contents test.elf
+
+clean:
+	-/bin/rm -f *.o *~ test.elf
+
diff --git a/testing/examples/ledtest-imx31pdk/crt0.S b/testing/examples/ledtest-imx31pdk/crt0.S
index 6c15be2..d749881 100644
--- a/testing/examples/ledtest-imx31pdk/crt0.S
+++ b/testing/examples/ledtest-imx31pdk/crt0.S
@@ -1,47 +1,47 @@
-/* Sample initialization file */

-	

-	.extern	main

-	.extern	exit

-	

-/* .text is used instead of .section .text so it works with arm-aout too.  */

-	.text

-	.code 32

-	.align 	0

-

-	.global	_mainCRTStartup

-	.global	_start

-	.global	start

-start:

-_start:

-_mainCRTStartup:

-

-/* Start by setting up a stack */

-	/*  Set up the stack pointer to end of bss */

-	ldr	r3, .LC2

-	mov 	sp, r3

-

-	sub	sl, sp, #512	/* Still assumes 512 bytes below sl */

-

-	mov 	a2, #0		/* Second arg: fill value */

-	mov	fp, a2		/* Null frame pointer */

-	mov	r7, a2		/* Null frame pointer for Thumb */

-	

-	ldr	a1, .LC1	/* First arg: start of memory block */

-	ldr	a3, .LC2	/* Second arg: end of memory block */

-	sub	a3, a3, a1	/* Third arg: length of block */

-	

-	mov	r0, #0		/*  no arguments  */

-	mov	r1, #0		/*  no argv either */

-

-	bl	main

-	bl	exit		/* Should not return */

-

-	/* For Thumb, constants must be after the code since only 

-	positive offsets are supported for PC relative addresses. */

-	

-	.align 0

-.LC1:

-	.word	__bss_start__

-.LC2:

-	.word	__bss_end__

-

+/* Sample initialization file */
+	
+	.extern	main
+	.extern	exit
+	
+/* .text is used instead of .section .text so it works with arm-aout too.  */
+	.text
+	.code 32
+	.align 	0
+
+	.global	_mainCRTStartup
+	.global	_start
+	.global	start
+start:
+_start:
+_mainCRTStartup:
+
+/* Start by setting up a stack */
+	/*  Set up the stack pointer to end of bss */
+	ldr	r3, .LC2
+	mov 	sp, r3
+
+	sub	sl, sp, #512	/* Still assumes 512 bytes below sl */
+
+	mov 	a2, #0		/* Second arg: fill value */
+	mov	fp, a2		/* Null frame pointer */
+	mov	r7, a2		/* Null frame pointer for Thumb */
+	
+	ldr	a1, .LC1	/* First arg: start of memory block */
+	ldr	a3, .LC2	/* Second arg: end of memory block */
+	sub	a3, a3, a1	/* Third arg: length of block */
+	
+	mov	r0, #0		/*  no arguments  */
+	mov	r1, #0		/*  no argv either */
+
+	bl	main
+	bl	exit		/* Should not return */
+
+	/* For Thumb, constants must be after the code since only 
+	positive offsets are supported for PC relative addresses. */
+	
+	.align 0
+.LC1:
+	.word	__bss_start__
+.LC2:
+	.word	__bss_end__
+
diff --git a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
index b1148c6..5b78daa 100644
--- a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
+++ b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
@@ -1,131 +1,128 @@
-echo Setting up for the FreeScale iMX31 Board.\n

-# SETUP GDB :

-#

-# Common gdb setup for ARM CPUs

-set complaints 1

-set output-radix 10

-set input-radix 10

-set prompt (arm-gdb) 

-set endian little

-dir .

-

-

-# DEFINE MACROS	:

-#

-# Create a "refresh" macro to update gdb's screens after the cpu

-# has been stopped by the other CPU or following an "monitor allstop" 

-define refresh

-	monitor set hbreak

-	cont

-	monitor clear hbreak

-end

-

-

-# CONNECT TO TARGET :

-target remote 127.0.0.1:3333

-monitor reset run

-#FIX!!!! should be reset init!

-monitor reset halt

-

-# iMX31 PDK board initialization commands:

-

-#// init_ccm

-

-monitor mww 0x53FC0000 0x040

-monitor mww 0x53F80000 0x074B0B7D

-

-#//532-133-66.5

-#//monitor mww 0x53F80004 0xFF871D58

-#//monitor mww 0x53F80010 0x0033280C

-

-#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40

-monitor mww 0x53F80004 0xFF871D50

-monitor mww 0x53F80010 0x00271C1B

-

-#// 208-104-52

-#//monitor mww 0x53F80004 0xFF871D48

-#//monitor mww 0x53F80010 0x04002000

-

-

-#// Configure CPLD on CS5 

-monitor mww 0xb8002050 0x0000DCF6

-monitor mww 0xb8002054 0x444A4541

-monitor mww 0xb8002058 0x44443302

-

-#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits

-#// in SW_PAD_CTL registers

-

-#// SDCLK

-monitor mww 0x43FAC26C 0

- 

-#// CAS

-monitor mww 0x43FAC270 0

- 

-#// RAS

-monitor mww 0x43FAC274 0

- 

-#// CS2 (CSD0)

-monitor mww 0x43FAC27C 0x1000

-    

-#// DQM3

-monitor mww 0x43FAC284 0

- 

-#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)

-monitor mww 0x43FAC288 0

-monitor mww 0x43FAC28C 0

-monitor mww 0x43FAC290 0

-monitor mww 0x43FAC294 0

-monitor mww 0x43FAC298 0

-monitor mww 0x43FAC29C 0

-monitor mww 0x43FAC2A0 0

-monitor mww 0x43FAC2A4 0

-monitor mww 0x43FAC2A8 0

-monitor mww 0x43FAC2AC 0

-monitor mww 0x43FAC2B0 0

-monitor mww 0x43FAC2B4 0

-monitor mww 0x43FAC2B8 0

-monitor mww 0x43FAC2BC 0

-monitor mww 0x43FAC2C0 0

-monitor mww 0x43FAC2C4 0

-monitor mww 0x43FAC2C8 0

-monitor mww 0x43FAC2CC 0

-monitor mww 0x43FAC2D0 0

-monitor mww 0x43FAC2D4 0

-monitor mww 0x43FAC2D8 0

-monitor mww 0x43FAC2DC 0

-

-#// Initialization script for 32 bit DDR on MX31 PDK 

-monitor mww 0xB8001010 0x00000004

-monitor mww 0xB8001004 0x006ac73a

-monitor mww 0xB8001000 0x92100000

-monitor mww 0x80000f00 0x12344321

-monitor mww 0xB8001000 0xa2100000

-monitor mww 0x80000000 0x12344321

-monitor mww 0x80000000 0x12344321

-monitor mww 0xB8001000 0xb2100000

-#monitor char 0x80000033 0xda

-monitor mwb 0x80000033 0xda

-#monitor char 0x81000000 0xff

-monitor mwb 0x81000000 0xff

-monitor mww 0xB8001000 0x82226080

-monitor mww 0x80000000 0xDEADBEEF

-monitor mww 0xB8001010 0x0000000c

-

-#  LOAD IMAGE :

-#

-

-# Load the program executable called "u-boot"

-load test.elf

-

-# Load the symbols for the program.

-symbol-file test.elf

-

-# RUN TO MAIN :

-#

-# Set a breakpoint at main().

-#b reset

-b main

-

-# Run to the breakpoint.

-c

+echo Setting up for the FreeScale iMX31 Board.\n
+# SETUP GDB :
+#
+# Common gdb setup for ARM CPUs
+set complaints 1
+set output-radix 10
+set input-radix 10
+set prompt (arm-gdb)
+set endian little
+dir .
+
+# DEFINE MACROS	:
+#
+# Create a "refresh" macro to update gdb's screens after the cpu
+# has been stopped by the other CPU or following an "monitor allstop"
+define refresh
+	monitor set hbreak
+	cont
+	monitor clear hbreak
+end
+
+# CONNECT TO TARGET :
+target remote 127.0.0.1:3333
+monitor reset run
+#FIX!!!! should be reset init!
+monitor reset halt
+
+# iMX31 PDK board initialization commands:
+
+#// init_ccm
+
+monitor mww 0x53FC0000 0x040
+monitor mww 0x53F80000 0x074B0B7D
+
+#//532-133-66.5
+#//monitor mww 0x53F80004 0xFF871D58
+#//monitor mww 0x53F80010 0x0033280C
+
+#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
+monitor mww 0x53F80004 0xFF871D50
+monitor mww 0x53F80010 0x00271C1B
+
+#// 208-104-52
+#//monitor mww 0x53F80004 0xFF871D48
+#//monitor mww 0x53F80010 0x04002000
+
+#// Configure CPLD on CS5 
+monitor mww 0xb8002050 0x0000DCF6
+monitor mww 0xb8002054 0x444A4541
+monitor mww 0xb8002058 0x44443302
+
+#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits
+#// in SW_PAD_CTL registers
+
+#// SDCLK
+monitor mww 0x43FAC26C 0
+
+#// CAS
+monitor mww 0x43FAC270 0
+
+#// RAS
+monitor mww 0x43FAC274 0
+
+#// CS2 (CSD0)
+monitor mww 0x43FAC27C 0x1000
+
+#// DQM3
+monitor mww 0x43FAC284 0
+
+#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
+monitor mww 0x43FAC288 0
+monitor mww 0x43FAC28C 0
+monitor mww 0x43FAC290 0
+monitor mww 0x43FAC294 0
+monitor mww 0x43FAC298 0
+monitor mww 0x43FAC29C 0
+monitor mww 0x43FAC2A0 0
+monitor mww 0x43FAC2A4 0
+monitor mww 0x43FAC2A8 0
+monitor mww 0x43FAC2AC 0
+monitor mww 0x43FAC2B0 0
+monitor mww 0x43FAC2B4 0
+monitor mww 0x43FAC2B8 0
+monitor mww 0x43FAC2BC 0
+monitor mww 0x43FAC2C0 0
+monitor mww 0x43FAC2C4 0
+monitor mww 0x43FAC2C8 0
+monitor mww 0x43FAC2CC 0
+monitor mww 0x43FAC2D0 0
+monitor mww 0x43FAC2D4 0
+monitor mww 0x43FAC2D8 0
+monitor mww 0x43FAC2DC 0
+
+#// Initialization script for 32 bit DDR on MX31 PDK
+monitor mww 0xB8001010 0x00000004
+monitor mww 0xB8001004 0x006ac73a
+monitor mww 0xB8001000 0x92100000
+monitor mww 0x80000f00 0x12344321
+monitor mww 0xB8001000 0xa2100000
+monitor mww 0x80000000 0x12344321
+monitor mww 0x80000000 0x12344321
+monitor mww 0xB8001000 0xb2100000
+#monitor char 0x80000033 0xda
+monitor mwb 0x80000033 0xda
+#monitor char 0x81000000 0xff
+monitor mwb 0x81000000 0xff
+monitor mww 0xB8001000 0x82226080
+monitor mww 0x80000000 0xDEADBEEF
+monitor mww 0xB8001010 0x0000000c
+
+#  LOAD IMAGE :
+#
+
+# Load the program executable called "u-boot"
+load test.elf
+
+# Load the symbols for the program.
+symbol-file test.elf
+
+# RUN TO MAIN :
+#
+# Set a breakpoint at main().
+#b reset
+b main
+
+# Run to the breakpoint.
+c
 
diff --git a/testing/examples/ledtest-imx31pdk/ldscript b/testing/examples/ledtest-imx31pdk/ldscript
index 1baea1e..d6f60d6 100644
--- a/testing/examples/ledtest-imx31pdk/ldscript
+++ b/testing/examples/ledtest-imx31pdk/ldscript
@@ -1,18 +1,18 @@
-SECTIONS

-{

-	. = 0x80000100;

-	.text : { *(.text) }

-	.data ALIGN(0x10): { *(.data) }

-	.bss ALIGN(0x10): {

-	    __bss_start__ = ABSOLUTE(.);

-	    *(.bss)

-	    . += 0x100;

-        }

-	__bss_end__ = .;

-PROVIDE (__stack = .);

-	_end = .;

-	.debug_info     0 : { *(.debug_info) }

-   	.debug_abbrev   0 : { *(.debug_abbrev) }

-   	.debug_line     0 : { *(.debug_line) }

-   	.debug_frame    0 : { *(.debug_frame) }

-}

+SECTIONS
+{
+	. = 0x80000100;
+	.text : { *(.text) }
+	.data ALIGN(0x10): { *(.data) }
+	.bss ALIGN(0x10): {
+	    __bss_start__ = ABSOLUTE(.);
+	    *(.bss)
+	    . += 0x100;
+        }
+	__bss_end__ = .;
+PROVIDE (__stack = .);
+	_end = .;
+	.debug_info     0 : { *(.debug_info) }
+   	.debug_abbrev   0 : { *(.debug_abbrev) }
+   	.debug_line     0 : { *(.debug_line) }
+   	.debug_frame    0 : { *(.debug_frame) }
+}