Rick Altherr <kc8apf@kc8apf.net> - update syntax

git-svn-id: svn://svn.berlios.de/openocd/trunk@1114 b42882b7-edfa-0310-969c-e2dbd0fdcd60

8 files changed, 40 insertions, 55 deletions

diff --git a/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg b/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg
index 1f101a8..95f7918 100644
--- a/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg
+++ b/testing/examples/AT91R40008Test/prj/at91r40008_turtle.cfg
@@ -24,16 +24,15 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup false
 
 target_script 0 reset .\prj\at91r40008_reset.script
 
-working_area 0 0x3C000 0x4000 nobackup 
 flash bank cfi 0x10000000 0x400000 2 2 0
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt
diff --git a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
index c24a251..8d9492b 100644
--- a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
+++ b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
@@ -22,16 +22,14 @@ reset_config trst_and_srst srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi-s_r4
-
-working_area 0 0x40000000 0x4000 nobackup
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false
 
 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
 flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt
diff --git a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
index d2dfd45..526cce1 100644
--- a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
+++ b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
@@ -22,13 +22,8 @@ reset_config trst_and_srst srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi-s_r4
-
-working_area 0 0x40000000 0x4000 nobackup
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi-s_r4
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup false
 
 #flash configuration
 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
@@ -36,3 +31,6 @@ flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt
diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
index 634b502..e08b84b 100644
--- a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
+++ b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
@@ -25,18 +25,16 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false
 
 target_script 0 reset .\prj\sam7s256_reset.script
 
-working_area 0 0x00200000 0x4000 nobackup
-
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank at91sam7 0 0 0 0 0
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt
diff --git a/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg b/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg
index 978512d..425505f 100644
--- a/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg
+++ b/testing/examples/SAM7X256Test/prj/sam7x256_jtagkey.cfg
@@ -25,18 +25,16 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe

 

 #target configuration

-daemon_startup reset

-

-#target <type> <startup mode>

-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>

-target arm7tdmi little 0 arm7tdmi

+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi

+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup false

 

 target_script 0 reset .\prj\sam7x256_reset.script

 

-working_area 0 0x00200000 0x4000 nobackup

-

 #flash bank <driver> <base> <size> <chip_width> <bus_width>

 flash bank at91sam7 0 0 0 0 0

 

 # For more information about the configuration files, take a look at:

 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger

+

+init

+reset halt

diff --git a/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg b/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg
index 79ce94b..2bef163 100644
--- a/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg
+++ b/testing/examples/STR710JtagSpeed/prj/str710_jtagkey.cfg
@@ -22,16 +22,14 @@ reset_config trst_and_srst srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
-
-working_area 0 0x2000C000 0x4000 nobackup
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false
 
 #flash bank str7x <base> <size> 0 0 <target#> <variant>
 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt
diff --git a/testing/examples/STR710Test/prj/str710_jtagkey.cfg b/testing/examples/STR710Test/prj/str710_jtagkey.cfg
index ed98ca1..da4c243 100644
--- a/testing/examples/STR710Test/prj/str710_jtagkey.cfg
+++ b/testing/examples/STR710Test/prj/str710_jtagkey.cfg
@@ -22,18 +22,16 @@ reset_config trst_and_srst srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false
 
 target_script 0 gdb_program_config .\prj\str710_program.script
 
-working_area 0 0x2000C000 0x4000 nobackup
-
 #flash bank str7x <base> <size> 0 0 <target#> <variant>
 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt
diff --git a/testing/examples/STR912Test/prj/str912_jtagkey.cfg b/testing/examples/STR912Test/prj/str912_jtagkey.cfg
index 5748803..487ec04 100644
--- a/testing/examples/STR912Test/prj/str912_jtagkey.cfg
+++ b/testing/examples/STR912Test/prj/str912_jtagkey.cfg
@@ -27,18 +27,16 @@ jtag_device 4 0x1 0xf 0xe
 jtag_device 5 0x1 0x1 0x1e
 
 #target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm966e little 1 arm966e
+target create target0 arm966e -endian little -chain-position 1 -variant arm966e
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false
 
 target_script 0 gdb_program_config .\prj\str912_program.script
 
-working_area 0 0x50000000 16384 nobackup
-
 #flash bank str7x <base> <size> 0 0 <target#> <variant>
 flash bank str9x 0x00000000 0x00080000 0 0 0
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt