diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-12-14 16:29:53 -0800 |
|---|---|---|
| committer | David Brownell <dbrownell@users.sourceforge.net> | 2009-12-14 16:29:53 -0800 |
| commit | c86a64dff7e9ebe8ab87e353f5b4156f830a0de7 (patch) | |
| tree | 2364eeba7cd05c0f4dd3b617ed2bcfc872267cbf /tcl | |
| parent | a1009509fb0fc187243435a0f38ef327e2aac147 (diff) | |
| download | riscv-openocd-c86a64dff7e9ebe8ab87e353f5b4156f830a0de7.zip riscv-openocd-c86a64dff7e9ebe8ab87e353f5b4156f830a0de7.tar.gz riscv-openocd-c86a64dff7e9ebe8ab87e353f5b4156f830a0de7.tar.bz2 | |
lm3748: use new Stellaris config file
Use the new file, and remove the old target/lm3s3748.cfg one.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/board/ek-lm3s3748.cfg | 5 | ||||
| -rw-r--r-- | tcl/target/lm3s3748.cfg | 29 |
2 files changed, 1 insertions, 33 deletions
diff --git a/tcl/board/ek-lm3s3748.cfg b/tcl/board/ek-lm3s3748.cfg index 1d56c7f..950e511 100644 --- a/tcl/board/ek-lm3s3748.cfg +++ b/tcl/board/ek-lm3s3748.cfg @@ -4,10 +4,7 @@ # NOTE: to use the on-board FT2232 JTAG interface: # source [find interface/luminary.cfg] -source [find target/lm3s3748.cfg] - -# LM3S parts don't support RTCK -jtag_khz 500 +source [find target/stellaris.cfg] # Board has only srst reset_config srst_only diff --git a/tcl/target/lm3s3748.cfg b/tcl/target/lm3s3748.cfg deleted file mode 100644 index 274377a..0000000 --- a/tcl/target/lm3s3748.cfg +++ /dev/null @@ -1,29 +0,0 @@ -# TI/Luminary Stellaris lm3s3748 - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME lm3s3748 -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x3ba00477 -} - -# JTAG scan chain -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID - -# The "lm3s" variant works around an erratum when using Rev A of "DustDevil" -# parts (third generation, includes LM3S3748). It keeps the debug registers -# from being cleared, by using software reset not SRST; NOP on newer revs. -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s - -# 8k working area at base of ram, not backed up -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 - -# flash configuration -- one bank of 128K -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME |