diff options
author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-25 16:48:15 +0000 |
---|---|---|
committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-25 16:48:15 +0000 |
commit | 43b38078787fd4f0753bdc3b150300d34678618a (patch) | |
tree | fee59f1f9393f45b0516858bd8719b96e17be427 /tcl | |
parent | 1c262c8826067b0d240f6db1c4eebf5514ea7475 (diff) | |
download | riscv-openocd-43b38078787fd4f0753bdc3b150300d34678618a.zip riscv-openocd-43b38078787fd4f0753bdc3b150300d34678618a.tar.gz riscv-openocd-43b38078787fd4f0753bdc3b150300d34678618a.tar.bz2 |
Michael Hasselberg <mh@open-engineering.de> target configuration files for Toshiba TX09 familiy
git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/board/topas910.cfg | 118 | ||||
-rw-r--r-- | tcl/board/topasa900.cfg | 125 | ||||
-rw-r--r-- | tcl/target/tmpa900.cfg | 56 | ||||
-rw-r--r-- | tcl/target/tmpa910.cfg | 56 |
4 files changed, 355 insertions, 0 deletions
diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg new file mode 100644 index 0000000..450a75b --- /dev/null +++ b/tcl/board/topas910.cfg @@ -0,0 +1,118 @@ +###################################### +# Target: Toshiba TOPAS910 -- TMPA910 Starterkit +# +###################################### + +# We add to the minimal configuration. +source [find target/tmpa910.cfg] + +###################### +# Target configuration +###################### + +#$_TARGETNAME configure -event gdb-attach { reset init } +$_TARGETNAME configure -event reset-init { topas910_init } + +proc topas910_init { } { +# Init PLL +# my settings + mww 0xf005000c 0x00000007 + mww 0xf0050010 0x00000065 + mww 0xf005000c 0x000000a7 + sleep 10 + mdw 0xf0050008 + mww 0xf0050008 0x00000002 + mww 0xf0050004 0x00000000 +# NEW: set CLKCR5 + mww 0xf0050054 0x00000040 +# + sleep 10 +# Init SDRAM +# _PMCDRV = 0x00000071; +# // +# // Initialize SDRAM timing paramater +# // +# _DMC_CAS_LATENCY = 0x00000006; +# _DMC_T_DQSS = 0x00000000; +# _DMC_T_MRD = 0x00000002; +# _DMC_T_RAS = 0x00000007; +# +# _DMC_T_RC = 0x0000000A; +# _DMC_T_RCD = 0x00000013; +# +# _DMC_T_RFC = 0x0000010A; +# +# _DMC_T_RP = 0x00000013; +# _DMC_T_RRD = 0x00000002; +# _DMC_T_WR = 0x00000002; +# _DMC_T_WTR = 0x00000001; +# _DMC_T_XP = 0x0000000A; +# _DMC_T_XSR = 0x0000000B; +# _DMC_T_ESR = 0x00000014; +# +# // +# // Configure SDRAM type parameter +# _DMC_MEMORY_CFG = 0x00008011; +# _DMC_USER_CONFIG = 0x00000011; +# // 32 bit memory interface +# +# +# _DMC_REFRESH_PRD = 0x00000A60; +# _DMC_CHIP_0_CFG = 0x000140FC; +# +# _DMC_DIRECT_CMD = 0x000C0000; +# _DMC_DIRECT_CMD = 0x00000000; +# +# _DMC_DIRECT_CMD = 0x00040000; +# _DMC_DIRECT_CMD = 0x00040000; +# _DMC_DIRECT_CMD = 0x00080031; +# // +# // Finally start SDRAM +# // +# _DMC_MEMC_CMD = MEMC_CMD_GO; +# */ + + mww 0xf0020260 0x00000071 + mww 0xf4300014 0x00000006 + mww 0xf4300018 0x00000000 + mww 0xf430001C 0x00000002 + mww 0xf4300020 0x00000007 + mww 0xf4300024 0x0000000A + mww 0xf4300028 0x00000013 + mww 0xf430002C 0x0000010A + mww 0xf4300030 0x00000013 + mww 0xf4300034 0x00000002 + mww 0xf4300038 0x00000002 + mww 0xf430003C 0x00000001 + mww 0xf4300040 0x0000000A + mww 0xf4300044 0x0000000B + mww 0xf4300048 0x00000014 + mww 0xf430000C 0x00008011 + mww 0xf4300304 0x00000011 + mww 0xf4300010 0x00000A60 + mww 0xf4300200 0x000140FC + mww 0xf4300008 0x000C0000 + mww 0xf4300008 0x00000000 + mww 0xf4300008 0x00040000 + mww 0xf4300008 0x00040000 + mww 0xf4300008 0x00080031 + mww 0xf4300004 0x00000000 + + sleep 10 +# jtag_speed 10000 + +# remap off in case of IROM boot + mww 0xf0000004 0x00000001 + +} + +# comment the following out if usinf J-Link, it soes not support DCC +arm7_9 dcc_downloads enable # Enable faster DCC downloads + + +##################### +# Flash configuration +##################### + +#flash bank cfi <base> <size> <chip width> <bus width> <target#> +flash bank cfi 0x20000000 0x2000000 2 2 0 diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg new file mode 100644 index 0000000..9d3ced9 --- /dev/null +++ b/tcl/board/topasa900.cfg @@ -0,0 +1,125 @@ +# Thanks to Pieter Conradie for this script! +# Target: Toshiba TOPAS900 -- TMPA900 Starterkit +###################################### + +# We add to the minimal configuration. +source [find target/tmpa900.cfg] + +###################### +# Target configuration +###################### + +#$_TARGETNAME configure -event gdb-attach { reset init } +$_TARGETNAME configure -event reset-init { topasa900_init } + +proc topasa900_init { } { +# Init PLL +# my settings + mww 0xf005000c 0x00000007 + mww 0xf0050010 0x00000065 + mww 0xf005000c 0x000000a7 + sleep 10 + mdw 0xf0050008 + mww 0xf0050008 0x00000002 + mww 0xf0050004 0x00000000 +# NEW: set CLKCR5 + mww 0xf0050054 0x00000040 +# +# bplan settings +# mww 0xf0050004 0x00000000 +# mww 0xf005000c 0x000000a7 +# sleep 10 +# mdw 0xf0050008 +# mww 0xf0050008 0x00000002 +# mww 0xf0050010 0x00000065 +# mww 0xf0050054 0x00000040 + sleep 10 +# Init SDRAM +# _PMCDRV = 0x00000071; +# // +# // Initialize SDRAM timing paramater +# // +# _DMC_CAS_LATENCY = 0x00000006; +# _DMC_T_DQSS = 0x00000000; +# _DMC_T_MRD = 0x00000002; +# _DMC_T_RAS = 0x00000007; +# +# _DMC_T_RC = 0x0000000A; +# _DMC_T_RCD = 0x00000013; +# +# _DMC_T_RFC = 0x0000010A; +# +# _DMC_T_RP = 0x00000013; +# _DMC_T_RRD = 0x00000002; +# _DMC_T_WR = 0x00000002; +# _DMC_T_WTR = 0x00000001; +# _DMC_T_XP = 0x0000000A; +# _DMC_T_XSR = 0x0000000B; +# _DMC_T_ESR = 0x00000014; +# +# // +# // Configure SDRAM type parameter +# _DMC_MEMORY_CFG = 0x00008011; +# _DMC_USER_CONFIG = 0x00000011; // 32 bit memory interface +# +# +# _DMC_REFRESH_PRD = 0x00000A60; +# _DMC_CHIP_0_CFG = 0x000140FC; +# +# _DMC_DIRECT_CMD = 0x000C0000; +# _DMC_DIRECT_CMD = 0x00000000; +# +# _DMC_DIRECT_CMD = 0x00040000; +# _DMC_DIRECT_CMD = 0x00040000; +# _DMC_DIRECT_CMD = 0x00080031; +# // +# // Finally start SDRAM +# // +# _DMC_MEMC_CMD = MEMC_CMD_GO; +# */ + + mww 0xf0020260 0x00000071 + mww 0xf4300014 0x00000006 + mww 0xf4300018 0x00000000 + mww 0xf430001C 0x00000002 + mww 0xf4300020 0x00000007 + mww 0xf4300024 0x0000000A + mww 0xf4300028 0x00000013 + mww 0xf430002C 0x0000010A + mww 0xf4300030 0x00000013 + mww 0xf4300034 0x00000002 + mww 0xf4300038 0x00000002 + mww 0xf430003C 0x00000001 + mww 0xf4300040 0x0000000A + mww 0xf4300044 0x0000000B + mww 0xf4300048 0x00000014 + mww 0xf430000C 0x00008011 + mww 0xf4300304 0x00000011 + mww 0xf4300010 0x00000A60 + mww 0xf4300200 0x000140FC + mww 0xf4300008 0x000C0000 + mww 0xf4300008 0x00000000 + mww 0xf4300008 0x00040000 + mww 0xf4300008 0x00040000 + mww 0xf4300008 0x00080031 + mww 0xf4300004 0x00000000 + + sleep 10 +# jtag_speed 10000 + +# remap off in case of IROM boot + mww 0xf0000004 0x00000001 + +} + +# comment the following out if usinf J-Link, it soes not support DCC +arm7_9 dcc_downloads enable # Enable faster DCC downloads + + +##################### +# Flash configuration +##################### + +#flash bank cfi <base> <size> <chip width> <bus width> <target#> +flash bank cfi 0x20000000 0x1000000 2 2 0 + diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg new file mode 100644 index 0000000..1bdf6a1 --- /dev/null +++ b/tcl/target/tmpa900.cfg @@ -0,0 +1,56 @@ +###################################### +# Target: Toshiba TMPA910 +###################################### + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME tmpa910 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x07926031 +} + +#TMPA910 has following IDs: +# CP15.0 register 0x41069265 +# CP15.1 register 0x1d152152 +# ARM core 0x07926031 + + +# +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst +jtag_nsrst_delay 20 +jtag_ntrst_delay 20 + +###################### +# Target configuration +###################### + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + +# built-in RAM0 +#working_area 0 0xf8004000 0x4000 nobackup +# built-in RAM1 +#working_area 1 0xf8008000 0x4000 nobackup +# built-in RAM2 +#working_area 2 0xf800c000 0x4000 nobackup +# built-in RAM 0-2 48k total +#working_area 0 0xf8004000 0xc000 nobackup + +# Internal sram1 memory +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0x8000 \ +-work-area-backup 0 diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg new file mode 100644 index 0000000..3ed3253 --- /dev/null +++ b/tcl/target/tmpa910.cfg @@ -0,0 +1,56 @@ +###################################### +# Target: Toshiba TMPA910 +###################################### + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME tmpa910 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x07926031 +} + +#TMPA910 has following IDs: +# CP15.0 register 0x41069265 +# CP15.1 register 0x1d152152 +# ARM core 0x07926031 + + +# +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst +jtag_nsrst_delay 20 +jtag_ntrst_delay 20 + +###################### +# Target configuration +###################### + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + +# built-in RAM0 +#working_area 0 0xf8004000 0x4000 nobackup +# built-in RAM1 +#working_area 1 0xf8008000 0x4000 nobackup +# built-in RAM2 +#working_area 2 0xf800c000 0x4000 nobackup +# built-in RAM 0-2 48k total +#working_area 0 0xf8004000 0xc000 nobackup + +# Internal sram1 memory +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0xc000 \ +-work-area-backup 0 |