diff options
author | Freddie Chopin <freddie_chopin@op.pl> | 2009-10-29 19:23:05 +0100 |
---|---|---|
committer | David Brownell <dbrownell@users.sourceforge.net> | 2009-10-31 11:13:10 -0700 |
commit | 0da0bfd40a0ba46a68a6b9db428700241d2700b1 (patch) | |
tree | 13850e7fdbd17853712c4dbf7f3c1d029f9fc016 /tcl | |
parent | 81521064194bdd7f904bfbfd23b53a91d1a458b8 (diff) | |
download | riscv-openocd-0da0bfd40a0ba46a68a6b9db428700241d2700b1.zip riscv-openocd-0da0bfd40a0ba46a68a6b9db428700241d2700b1.tar.gz riscv-openocd-0da0bfd40a0ba46a68a6b9db428700241d2700b1.tar.bz2 |
target.cfg: use $_TARGETNAME for flash
This gets rid of runtime warnings from the use of numbers.
STM32 and LPC2103 were tested. Other LPC updates are the
same, and so are safe. The CFI updates match other tested
changes now in the tree.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/target/at91r40008.cfg | 2 | ||||
-rw-r--r-- | tcl/target/epc9301.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc1768.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2103.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2124.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2129.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2148.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2294.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2378.cfg | 2 | ||||
-rw-r--r-- | tcl/target/lpc2478.cfg | 2 | ||||
-rw-r--r-- | tcl/target/smdk6410.cfg | 2 | ||||
-rw-r--r-- | tcl/target/stm32.cfg | 2 | ||||
-rw-r--r-- | tcl/target/xba_revA3.cfg | 2 |
13 files changed, 13 insertions, 13 deletions
diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg index fe755b4..eb6caba 100644 --- a/tcl/target/at91r40008.cfg +++ b/tcl/target/at91r40008.cfg @@ -45,7 +45,7 @@ $_TARGETNAME configure -event gdb-flash-erase-start { $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 -flash bank cfi 0x10000000 0x400000 2 2 0 +flash bank cfi 0x10000000 0x400000 2 2 $_TARGETNAME # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg index f3fe7eb..2b4155f 100644 --- a/tcl/target/epc9301.cfg +++ b/tcl/target/epc9301.cfg @@ -28,4 +28,4 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME #flash configuration #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...] -flash bank cfi 0x60000000 0x1000000 2 2 0 +flash bank cfi 0x60000000 0x1000000 2 2 $_TARGETNAME diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg index fbf7117..63ec1bb 100644 --- a/tcl/target/lpc1768.cfg +++ b/tcl/target/lpc1768.cfg @@ -44,7 +44,7 @@ $_TARGETNAME configure -event reset-init { # LPC1768 has 512kB of user-available FLASH (bootloader is located in separate dedicated region). # flash bank lpc1700 <base> <size> 0 0 <target#> <variant> <cclk> [calc_checksum] -flash bank lpc2000 0x0 0x80000 0 0 0 lpc1700 12000 calc_checksum +flash bank lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 12000 calc_checksum # 4MHz / 6 = 666kHz, so use 500 jtag_khz 500 diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg index 899ca23..1a88076 100644 --- a/tcl/target/lpc2103.cfg +++ b/tcl/target/lpc2103.cfg @@ -35,4 +35,4 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s # 32kB of internal Flash, core clocked with 12MHz crystal # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum] -flash bank lpc2000 0x0 0x8000 0 0 0 lpc2000_v2 12000 calc_checksum +flash bank lpc2000 0x0 0x8000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg index 9430c1b..61d411b 100644 --- a/tcl/target/lpc2124.cfg +++ b/tcl/target/lpc2124.cfg @@ -39,4 +39,4 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum +flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg index daaa8d5..5438fc3 100644 --- a/tcl/target/lpc2129.cfg +++ b/tcl/target/lpc2129.cfg @@ -38,4 +38,4 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank <driver> <base> <size> <chip_width> <bus_width> -flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum +flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg index e70947f..b502343 100644 --- a/tcl/target/lpc2148.cfg +++ b/tcl/target/lpc2148.cfg @@ -52,4 +52,4 @@ $_TARGETNAME configure -event reset-init { } # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum] -flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum +flash bank lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg index 399b11d..08fbf58 100644 --- a/tcl/target/lpc2294.cfg +++ b/tcl/target/lpc2294.cfg @@ -32,7 +32,7 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s #flash configuration #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> -flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum +flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg index d34ffae..34b9963 100644 --- a/tcl/target/lpc2378.cfg +++ b/tcl/target/lpc2378.cfg @@ -43,7 +43,7 @@ $_TARGETNAME configure -event reset-init { # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader. # After reset the chip uses its internal 4MHz RC oscillator #flash bank lpc2000 <base> <size> 0 0 <target#> <variant> -flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum +flash bank lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum # 4MHz / 6 = 666kHz, so use 500 jtag_khz 500 diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg index 1d2058b..bf33ae0 100644 --- a/tcl/target/lpc2478.cfg +++ b/tcl/target/lpc2478.cfg @@ -43,7 +43,7 @@ $_TARGETNAME configure -event reset-init { # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader. # After reset the chip uses its internal 4MHz RC oscillator. # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum] -flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum +flash bank lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum # Try to use RCLK, if RCLK is not available use "normal" mode. 4MHz / 6 = 666kHz, so use 500. jtag_rclk 500 diff --git a/tcl/target/smdk6410.cfg b/tcl/target/smdk6410.cfg index 6ce07ca..7f15f8b 100644 --- a/tcl/target/smdk6410.cfg +++ b/tcl/target/smdk6410.cfg @@ -5,4 +5,4 @@ source [find target/samsung_s3c6410.cfg] -flash bank cfi 0x00000000 0x00100000 2 2 0 jedec_probe
\ No newline at end of file +flash bank cfi 0x00000000 0x00100000 2 2 $_TARGETNAME jedec_probe diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg index a37e733..b5a8652 100644 --- a/tcl/target/stm32.cfg +++ b/tcl/target/stm32.cfg @@ -62,7 +62,7 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 -flash bank stm32x 0 0 0 0 0 +flash bank stm32x 0 0 0 0 $_TARGETNAME # For more information about the configuration files, take a look at: # openocd.texi diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg index 0595fa1..e1c8870 100644 --- a/tcl/target/xba_revA3.cfg +++ b/tcl/target/xba_revA3.cfg @@ -79,7 +79,7 @@ $_TARGETNAME configure -event reset-init { $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 -flash bank cfi 0x50000000 0x400000 2 2 0 +flash bank cfi 0x50000000 0x400000 2 2 $_TARGETNAME init reset init |