target: Remove "-variant" argument

Remove this underutilized feature. Despite the fact that a lot of configs
specifies a arbitrary "variant", only the xscale target actually defines
any.

In the case of xscale, the use of -variant is dubious since

1) it's used as a redundant irlen specifier,
2) it carries a comment that it doesn't really need it and
3) only two xscale configs even specify it.

If there's a future target that needs a variant set, a target specific
option could be added when needed.

Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2283
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

29 files changed, 30 insertions, 30 deletions

diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg
index 2d286ab..912bd0e 100644
--- a/tcl/target/at91r40008.cfg
+++ b/tcl/target/at91r40008.cfg
@@ -25,5 +25,5 @@ if { [info exists CPUTAPID] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 $_TARGETNAME configure -work-area-phys 0x20000 -work-area-size 0x20000 -work-area-backup 0
diff --git a/tcl/target/at91sam7se512.cfg b/tcl/target/at91sam7se512.cfg
index 17d0d8e..ab09701 100644
--- a/tcl/target/at91sam7se512.cfg
+++ b/tcl/target/at91sam7se512.cfg
@@ -29,7 +29,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 # The target
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
 
diff --git a/tcl/target/at91sam7sx.cfg b/tcl/target/at91sam7sx.cfg
index 4b3cab4..a563ac0 100644
--- a/tcl/target/at91sam7sx.cfg
+++ b/tcl/target/at91sam7sx.cfg
@@ -23,7 +23,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 set _TARGETNAME $_CHIPNAME.cpu
 
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 $_TARGETNAME configure -event reset-init {
         soft_reset_halt
         # RSTC_CR : Reset peripherals
diff --git a/tcl/target/at91sam7x256.cfg b/tcl/target/at91sam7x256.cfg
index d1bfc77..e1a2435 100644
--- a/tcl/target/at91sam7x256.cfg
+++ b/tcl/target/at91sam7x256.cfg
@@ -22,7 +22,7 @@ if { [info exists CPUTAPID] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-init {
 	# disable watchdog
diff --git a/tcl/target/at91sam7x512.cfg b/tcl/target/at91sam7x512.cfg
index 9677eca..6910e85 100644
--- a/tcl/target/at91sam7x512.cfg
+++ b/tcl/target/at91sam7x512.cfg
@@ -22,7 +22,7 @@ if { [info exists CPUTAPID] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-init {
 	# disable watchdog
diff --git a/tcl/target/at91sam9.cfg b/tcl/target/at91sam9.cfg
index f901ca8..bf99fb2 100644
--- a/tcl/target/at91sam9.cfg
+++ b/tcl/target/at91sam9.cfg
@@ -34,4 +34,4 @@ adapter_khz 3
 ######################
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
diff --git a/tcl/target/cs351x.cfg b/tcl/target/cs351x.cfg
index 0785d53..cb05da2 100644
--- a/tcl/target/cs351x.cfg
+++ b/tcl/target/cs351x.cfg
@@ -20,7 +20,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME -variant fa526
+target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # There is 16K of SRAM on this chip
 # FIXME: flash programming is not working by using this work area. So comment this out for now.
diff --git a/tcl/target/faux.cfg b/tcl/target/faux.cfg
index fc905bf..d3891cd 100644
--- a/tcl/target/faux.cfg
+++ b/tcl/target/faux.cfg
@@ -23,7 +23,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 #target configuration
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 #dummy flash driver
 set _FLASHNAME $_CHIPNAME.flash
diff --git a/tcl/target/gp326xxxa.cfg b/tcl/target/gp326xxxa.cfg
index e801cc8..feb7554 100644
--- a/tcl/target/gp326xxxa.cfg
+++ b/tcl/target/gp326xxxa.cfg
@@ -24,7 +24,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 set _TARGETNAME $_CHIPNAME.cpu
 
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # Use internal SRAM as a work area
 $_TARGETNAME configure -work-area-phys 0xf8000000 -work-area-size 0x8000 -work-area-backup 0
diff --git a/tcl/target/imx21.cfg b/tcl/target/imx21.cfg
index 9a5e3ad..2d9ce39 100644
--- a/tcl/target/imx21.cfg
+++ b/tcl/target/imx21.cfg
@@ -29,6 +29,6 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 arm7_9 dcc_downloads enable
diff --git a/tcl/target/imx27.cfg b/tcl/target/imx27.cfg
index 5530e68..e5a5035 100644
--- a/tcl/target/imx27.cfg
+++ b/tcl/target/imx27.cfg
@@ -39,7 +39,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 # REVISIT what operating environment sets up this virtual address mapping?
 $_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 \
 	-work-area-size 0x8000 -work-area-backup 1
diff --git a/tcl/target/imx28.cfg b/tcl/target/imx28.cfg
index 8c478b7..4cc3950 100644
--- a/tcl/target/imx28.cfg
+++ b/tcl/target/imx28.cfg
@@ -33,6 +33,6 @@ jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_C
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 arm7_9 dcc_downloads enable
diff --git a/tcl/target/is5114.cfg b/tcl/target/is5114.cfg
index 331625f..31f1aa1 100644
--- a/tcl/target/is5114.cfg
+++ b/tcl/target/is5114.cfg
@@ -36,7 +36,7 @@ jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1
 
 #arm946e-s and
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-start { adapter_khz 16 }
 $_TARGETNAME configure -event reset-init {
diff --git a/tcl/target/ixp42x.cfg b/tcl/target/ixp42x.cfg
index 9dd9f51..d7b5bf4 100644
--- a/tcl/target/ixp42x.cfg
+++ b/tcl/target/ixp42x.cfg
@@ -27,7 +27,7 @@ set _CPUTAPID6 0x29277013
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3 -expected-id $_CPUTAPID4 -expected-id $_CPUTAPID5 -expected-id $_CPUTAPID6
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME
 
 
 # register constants for IXP42x SDRAM controller
diff --git a/tcl/target/ks869x.cfg b/tcl/target/ks869x.cfg
index cd22ae8..0f6829c 100644
--- a/tcl/target/ks869x.cfg
+++ b/tcl/target/ks869x.cfg
@@ -25,7 +25,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 set _TARGETNAME $_CHIPNAME.cpu
 
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x20000 -work-area-size 0x20000 -work-area-backup 0
 
diff --git a/tcl/target/lpc2900.cfg b/tcl/target/lpc2900.cfg
index 6b174f8..5367787 100644
--- a/tcl/target/lpc2900.cfg
+++ b/tcl/target/lpc2900.cfg
@@ -42,7 +42,7 @@ if { $HAS_ETB == 1 } {
     jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
     # Create the ".cpu" target
-    target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME -variant arm966e
+    target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME
 
     # Configure ETM and ETB
     etm config $_TARGETNAME 8 normal full etb
@@ -53,7 +53,7 @@ if { $HAS_ETB == 1 } {
     jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
     # Create the ".cpu" target
-    target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME -variant arm966e
+    target create $_TARGETNAME arm966e -endian little -chain-position $_TARGETNAME
 }
 
 arm7_9 dbgrq enable
diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg
index 62cb4f4..95f7f16 100644
--- a/tcl/target/pxa270.cfg
+++ b/tcl/target/pxa270.cfg
@@ -44,7 +44,7 @@ jtag_ntrst_delay 250
 set _TARGETNAME $_CHIPNAME.cpu
 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3
 
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off
 $_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0
diff --git a/tcl/target/pxa3xx.cfg b/tcl/target/pxa3xx.cfg
index 832152b..c459f6e 100644
--- a/tcl/target/pxa3xx.cfg
+++ b/tcl/target/pxa3xx.cfg
@@ -80,7 +80,7 @@ jtag newtap $_CHIPNAME cpu -irlen 11 -ircapture 0x1 -irmask 0x7f \
 	-expected-id $_CPUTAPID_PXA32X_C0
 
 target create $_TARGETNAME xscale -endian $_ENDIAN \
-	-chain-position $_TARGETNAME -variant pxa3xx
+	-chain-position $_TARGETNAME
 
 # work area in internal RAM.
 $_TARGETNAME configure -work-area-phys 0x5c030000 -work-area-size 0x10000
diff --git a/tcl/target/samsung_s3c2410.cfg b/tcl/target/samsung_s3c2410.cfg
index ae7a138..017c104 100644
--- a/tcl/target/samsung_s3c2410.cfg
+++ b/tcl/target/samsung_s3c2410.cfg
@@ -27,7 +27,7 @@ reset_config trst_and_srst
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0
 
diff --git a/tcl/target/samsung_s3c2440.cfg b/tcl/target/samsung_s3c2440.cfg
index 9d66337..2a0a915 100644
--- a/tcl/target/samsung_s3c2440.cfg
+++ b/tcl/target/samsung_s3c2440.cfg
@@ -26,7 +26,7 @@ if { [info exists CPUTAPID] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1
 
diff --git a/tcl/target/samsung_s3c2450.cfg b/tcl/target/samsung_s3c2450.cfg
index 89a2ea8..1bc4f2d 100644
--- a/tcl/target/samsung_s3c2450.cfg
+++ b/tcl/target/samsung_s3c2450.cfg
@@ -36,7 +36,7 @@ if { [info exists CPUTAPID] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xE -irmask 0x0f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # FIX!!!!! should this really use srst_pulls_trst?
 # With srst_pulls_trst "reset halt" will not reset into the
diff --git a/tcl/target/samsung_s3c6410.cfg b/tcl/target/samsung_s3c6410.cfg
index 07fd425..88fe966 100644
--- a/tcl/target/samsung_s3c6410.cfg
+++ b/tcl/target/samsung_s3c6410.cfg
@@ -38,7 +38,7 @@ jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETBTAPID
 jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm1176
+target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 adapter_nsrst_delay 500
 jtag_ntrst_delay 500
diff --git a/tcl/target/smp8634.cfg b/tcl/target/smp8634.cfg
index 5207a44..c13414c 100644
--- a/tcl/target/smp8634.cfg
+++ b/tcl/target/smp8634.cfg
@@ -28,4 +28,4 @@ reset_config trst_and_srst separate
 jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant
+target create $_TARGETNAME mips_m4k -endian $_ENDIAN
diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg
index 0c458c0..d26a8b1 100644
--- a/tcl/target/str710.cfg
+++ b/tcl/target/str710.cfg
@@ -27,7 +27,7 @@ reset_config trst_and_srst srst_pulls_trst
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-start { adapter_khz 10 }
 $_TARGETNAME configure -event reset-init {
diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg
index b022be0..48d3134 100644
--- a/tcl/target/str730.cfg
+++ b/tcl/target/str730.cfg
@@ -31,7 +31,7 @@ adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
 
 $_TARGETNAME configure -event reset-start { adapter_khz 10 }
 $_TARGETNAME configure -event reset-init {
diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg
index e916727..ef6e795 100644
--- a/tcl/target/str750.cfg
+++ b/tcl/target/str750.cfg
@@ -33,7 +33,7 @@ adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0
 
 $_TARGETNAME configure -event reset-start { adapter_khz 10 }
 $_TARGETNAME configure -event reset-init {
diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index 38545ac..36c0b2a 100644
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -46,7 +46,7 @@ if { [info exists BSTAPID] } {
 jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID -ignore-version
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-start { adapter_khz 16 }
 
diff --git a/tcl/target/test_reset_syntax_error.cfg b/tcl/target/test_reset_syntax_error.cfg
index b8cfc62..cb4e46f 100644
--- a/tcl/target/test_reset_syntax_error.cfg
+++ b/tcl/target/test_reset_syntax_error.cfg
@@ -9,7 +9,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf
 
 #target configuration
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-init {
 
diff --git a/tcl/target/ti_calypso.cfg b/tcl/target/ti_calypso.cfg
index 8b4a869..9d3b293 100644
--- a/tcl/target/ti_calypso.cfg
+++ b/tcl/target/ti_calypso.cfg
@@ -42,7 +42,7 @@ jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 # target
 
 set _TARGETNAME $_CHIPNAME.arm
-target create $_TARGETNAME arm7tdmi -endian little -chain-position $_TARGETNAME -variant calypso
+target create $_TARGETNAME arm7tdmi -endian little -chain-position $_TARGETNAME
 
 # workarea