diff options
author | Matthias Welwarsky <matthias.welwarsky@sysgo.com> | 2018-04-19 09:56:14 +0200 |
---|---|---|
committer | Matthias Welwarsky <matthias@welwarsky.de> | 2018-04-23 08:55:11 +0100 |
commit | 2eadf1e847f4880c698cae8dca857714e464e471 (patch) | |
tree | 4391c78b3edcdcf31ffc13d34e20e37c6b629ecb /tcl/target/stm32f1x.cfg | |
parent | 3737dd69e73816d186ba418d7b833462a8041079 (diff) | |
download | riscv-openocd-2eadf1e847f4880c698cae8dca857714e464e471.zip riscv-openocd-2eadf1e847f4880c698cae8dca857714e464e471.tar.gz riscv-openocd-2eadf1e847f4880c698cae8dca857714e464e471.tar.bz2 |
board: add configuration for stm32f103c8 "Blue Pill"
The "Blue Pill" is a popular development board with an STM32F103C8
micro controller. According to sources, it has a 128kB Flash on board
even though the option bytes only report 64kB. This patch therefore also
modifies target/stm32f1x.cfg to take an optional FLASH_SIZE variable into
account which the board file sets to 0x20000.
Change-Id: I8a78ccd2b5faf637c539ee3cf8136789ee15c95d
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4495
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Diffstat (limited to 'tcl/target/stm32f1x.cfg')
-rw-r--r-- | tcl/target/stm32f1x.cfg | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/tcl/target/stm32f1x.cfg b/tcl/target/stm32f1x.cfg index e0f6ede..471878d 100644 --- a/tcl/target/stm32f1x.cfg +++ b/tcl/target/stm32f1x.cfg @@ -22,6 +22,14 @@ if { [info exists WORKAREASIZE] } { set _WORKAREASIZE 0x1000 } +# Allow overriding the Flash bank size +if { [info exists FLASH_SIZE] } { + set _FLASH_SIZE $FLASH_SIZE +} else { + # autodetect size + set _FLASH_SIZE 0 +} + #jtag scan chain if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID @@ -49,7 +57,7 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE # flash size will be probed set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME +flash bank $_FLASHNAME stm32f1x 0x08000000 $_FLASH_SIZE 0 0 $_TARGETNAME # JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz adapter_khz 1000 |